Zone Class |
This class will trigger ZoneChangeEvent when a part of a Expander or ZoneChangeEvent when a part of a Swamp.
public class Zone
The Zone type exposes the following members.
| Name | Description | |
|---|---|---|
| Balance | Sets the audio balance. Valid values range from -50% to +50%. A value of 0% signifies an even balance between left and right. | |
| BalanceFeedback |
Reports the audio balance.
The ZoneChangeEvent event will trigger with BalanceFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with BalanceFeedbackEventId when this Zone is a part of a Swamp. | |
| Bass | Sets the bass level. Valid values range from -120 (-12dB) to +120 (+12dB), where 1 = 0.1dB. | |
| BassFeedback |
Tracks the value of the corresponding bass integer input.
The ZoneChangeEvent event will trigger with BassFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with BassFeedbackEventId when this Zone is a part of a Swamp. | |
| CrestronDrcOnFeedback |
Indicates the DRC status. The output is true when DRC is enabled.
When false, this indicates that the feature is turned off.
The ZoneChangeEvent event will trigger with CrestronDRCOnFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with CrestronDRCOnFeedbackEventId when this Zone is a part of a Swamp. | |
| DoorbellFeedback |
Indicates the Doorbell mode for this zone. The output is true when doorbell mode is enabled.
When false, this indicates that the feature is turned off.
The ZoneChangeEvent event will trigger with DoorbellEnableFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with DoorbellEnableFeedbackEventId when this Zone is a part of a Swamp. | |
| DoorbellVolume | Sets the doorbell volume level. Use "SimplSharpDeviceHelper.PercentToUshort" to convert the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert the ushort value to percentage. This is supported in device firmware versions 4.002.278600000 and higher. | |
| DoorbellVolumeFeedback |
Reports the doorbell volume level.
Use "SimplSharpDeviceHelper.PercentToUshort" to convert
the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert
the ushort value to percentage.
This is supported in device firmware versions 4.002.278600000 and higher.
The ZoneChangeEvent event will trigger with DoorbellVolumeFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with DoorbellVolumeFeedbackEventId when this Zone is a part of a Swamp. | |
| EQSelection | Sets the tone profile, which sets the bass and treble to pre-defined levels. | |
| EqSelectionFeedback |
Reports the currently active tone profile with a return type of eEQSelection.
The ZoneChangeEvent event will trigger with EqSelectionFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with EqSelectionFeedbackEventId when this Zone is a part of a Swamp. | |
| IsAmplified | Indicates if the Zone is Amplified or not. | |
| LoudnessOnFeedback |
Indicates the status of the loudness function. The output is true when loudness is on.
When false, this indicates that loudness is off.
The ZoneChangeEvent event will trigger with LoudnessOnFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with LoudnessOnFeedbackEventId when this Zone is a part of a Swamp. | |
| MaxVolume | Defines the maximum volume. This allows endpoints to be set for volume control. | |
| MaxVolumeFeedback |
Reports the Max volume.
The ZoneChangeEvent event will trigger with MaxVolumeFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with MaxVolumeFeedbackEventId when this Zone is a part of a Swamp. | |
| MinVolume | Defines the minimum volume. This allows endpoints to be set for volume control. | |
| MinVolumeFeedback |
Reports the Min volume.
The ZoneChangeEvent event will trigger with MinVolumeFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with MinVolumeFeedbackEventId when this Zone is a part of a Swamp. | |
| MonoOnFeedback |
Indicates the mono status of the zone. The output is true when zone audio is set to mono.
When false, this indicates stereo audio.
The ZoneChangeEvent event will trigger with MonoOnFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with MonoOnFeedbackEventId when this Zone is a part of a Swamp. | |
| MuteOnFeedback |
Indicates the current mute status. The output is true when mute is active.
When false, this indicates audio has resumed.
The ZoneChangeEvent event will trigger with MuteOnFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with MuteOnFeedbackEventId when this Zone is a part of a Swamp. | |
| Name | Sets the zone name. The string can consist of alphanumeric characters (20 characters max). | |
| NightMode | Selects the Night mode for the zone. | |
| NightModeFeedback |
Indicates the current night mode.
This property will trigger OnZoneChange event with NightModeFeedbackEventId. | |
| Number | This Number of the Zone. | |
| OutputBusVolumeOffset | Sets the volume offset. The offset ranges from -120 (-12dB) to +120 (+12dB), where 1 = 0.1dB. | |
| OutputBusVolumeOffsetFeedback |
Reports the output bus volume offset.
The ZoneChangeEvent event will trigger with OutputBusVolumeOffsetFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with OutputBusVolumeOffsetFeedbackEventId when this Zone is a part of a Swamp. | |
| Source | Select the source to switch to a particular zone, where 1 to 24 are valid for Analog and SPDIF sources. | |
| SourceFeedback |
Reports the currently active source.
The ZoneChangeEvent event will trigger with SourceFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with SourceFeedbackEventId when this Zone is a part of a Swamp. | |
| StartupVolume | Sets the startup volume. This is the default volume that will be applied as the switcher transitions from no source selected (0) to a source being routed (1-24). | |
| StartupVolumeFeedback |
Reports the startup volume.
The ZoneChangeEvent event will trigger with StartupVolumeFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with StartupVolumeFeedbackEventId when this Zone is a part of a Swamp. | |
| ToneProfile | Selects the Tone profile for the zone. | |
| ToneProfileFeedback |
Indicates the current Tone profile.
This property will trigger OnZoneChange event with ToneProfileFeedbackEventId. | |
| Treble | Sets the treble level. Valid values range from -120 (-12dB) to +120 (+12dB), where 1 = 0.1dB. | |
| TrebleFeedback |
Tracks the value of the corresponding treble integer input.
The ZoneChangeEvent event will trigger with TrebleFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with TrebleFeedbackEventId when this Zone is a part of a Swamp. | |
| Volume | Sets the Zone volume level. Valid values range from 0% to 100%. where 0% = 0 and 100% = 65535. Use "SimplSharpDeviceHelper.PercentToUshort" to convert the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert the ushort value to percentage. | |
| VolumedBFeedback |
Reports the actual volume level in decibels.
Reported values will range from -800 (-80dB) to +200 (+20dB), where 1 = 0.1dB.
The ZoneChangeEvent event will trigger with VolumedBFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with VolumedBFeedbackEventId when this Zone is a part of a Swamp. | |
| VolumeFeedback |
Reports the volume level.
Reported values range from 0 to 100%. where 0% = 0 and 100% = 65535.
Use "SimplSharpDeviceHelper.PercentToUshort" to convert
the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert
the ushort value to percentage.
The ZoneChangeEvent event will trigger with VolumeFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with VolumeFeedbackEventId when this Zone is a part of a Swamp. |
| Name | Description | |
|---|---|---|
| CrestronDRCOff | Disables the Crestron-defined DRC (Dynamic Range Control) algorithm to the zone's audio. | |
| CrestronDRCOn | Applies the Crestron-defined DRC (Dynamic Range Control) algorithm to the zone's audio. Dynamic range control reduces loud peaks in sound while raising the level of quiet sounds. | |
| DoorbellEnableOff | Method to disable the doorbell mode for this zone. This is supported in device firmware versions 4.002.278600000 and higher | |
| DoorbellEnableOn | Method to enable the doorbell mode for this zone. This is supported in device firmware versions 4.002.278600000 and higher | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| LoudnessOff | Method to disable the zone's loudness function. | |
| LoudnessOn | Method to enable zone's loudness function. When loudness is active, this adds a bass gain of +10dB and a treble gain of +5dB. | |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) | |
| MonoOff | Method to set zone's audio to stereo. | |
| MonoOn | Method to set the zone's audio to mono. | |
| MuteOff | Method to unmute the zone's audio. | |
| MuteOn | Method to mute the zone's audio. | |
| ToString | Returns a string that represents the current object. (Inherited from Object) |