Din |
The DinDliBase type exposes the following members.
| Name | Description | |
|---|---|---|
| AllDriverLower | Property to lower the light level of all the drivers on the DinDliBase, using the ramp rate defined in the DliDriver. | |
| AllDriverRaise | Property to raise the light level of all the drivers on the DinDliBase, using the ramp rate defined in the DliDriver. | |
| AllDriverTcLower | Property to lower the Tc level of all the drivers on the DinDliBase, using the ramp rate defined in the DliDriver. | |
| AllDriverTcRaise | Property to raise the Tc level of all the drivers on the DinDliBase, using the ramp rate defined in the DliDriver. | |
| BroadcastLevel | Property to set the brightness level for all drivers on the DinDliBase. | |
| BroadcastTcLevel | Property to set the Tc level for all drivers on the DinDliBase. | |
| CctSceneApproximationNeedsUpdateFeedback |
Property to indicate that the CCT scene approximation needs updated.
The BaseEvent event will trigger with CctSceneApproximationNeedsUpdateEventId. | |
| CctSceneApproximationProgrammingInProgressFeedback |
Property to indicate that the CCT scene approximation programming is in progress.
The BaseEvent event will trigger with CctSceneApproximationProgrammingInProgressEventId. | |
| ConfigurationReadFeedback |
Property to indicate that the DALI controller is reading configuration parameters (i.e., minimum/maximum and override levels).
These parameters are typically set when using the DALI Commissioning Tool.
The DriverSigEventChange event will trigger with ConfigurationReadFeedbackEventId. | |
| ConnectedIpList |
A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID.
This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null.
If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected.
The order of items in this list is not guaranteed.
(Inherited from GenericDevice) | |
| CurrentCctOperatingModeFeedback |
Property to report the current CCT operating mode.
The BaseEvent event will trigger with CurrentCctOperatingModeFeedbackEventId. | |
| DaliBusErrorFeedback |
Property to indicate that an error has been detected on the DinDliBase.
The DriverSigEventChange event will trigger with DaliBusErrorFeedbackEventId. | |
| Description |
Get/Set the description of this device.
(Inherited from GenericBase) | |
| DeviceName | Property to set the Device Name of this DinDliBase | |
| DeviceNameFeedback |
Property to read the Device Name value of this DinDliBase The BaseEvent event will trigger with DeviceNameFeedbackEventId. | |
| Disposed |
Property to indicate if the device has been disposed.
(Inherited from GenericDevice) | |
| DriverReplacement | Object of Driver Replacement on DIN-DLI. | |
| Drivers | DLI Drivers collection. Valid index values for this collection are from Driver0 to Driver63. | |
| DriverSceneConfigurationOperations | Object of Driver Scene Configuration Operations on DIN-DLI. | |
| DriverSceneRecallSave | Object of Driver Scene Recall Save on DIN-DLI. | |
| Groups | DLI Groups collection. Valid index values for this collection are from Group0 to Group15. | |
| GroupSceneConfigurationOperations | Object of Group Scene Configuration Operations on DIN-DLI. | |
| GroupSceneRecallSave | Object of Group Scene Recall Save on DIN-DLI. | |
| ID |
Property to get the ID of the device.
(Inherited from GenericDevice) | |
| InExternalOverrideFeedback |
Property to indicate that external override is active.
The OverrideEventHandler event will trigger with External. | |
| InManualOverrideFeedback |
Property to indicate that manual override is active.
The OverrideEventHandler event will trigger with Manual. | |
| IsDynamicFadeTimeEnabledFeedback |
Property to indicate the enabled state of Dynamic Fade Times.
The BaseEvent event will trigger with IsDynamicFadeTimeEnabledEventId. | |
| IsExtendedFadeTimeEnabledFeedback |
Property to indicate the enabled state of Extended Fade Times.
The BaseEvent event will trigger with IsExtendedFadeTimeEnabledEventId. | |
| IsOnline |
Property to get the current online state of the device.
(Inherited from GenericDevice) | |
| Name |
Get the name of this device.
(Inherited from GenericBase) | |
| Parent |
The parent that a given object was added to.
(Inherited from GenericBase) | |
| Registerable |
Property to indicate that this device can be registered.
(Inherited from GenericDevice) | |
| Registered |
Property to get the current registration state of the device.
(Inherited from GenericDevice) | |
| RegistrationFailureReason |
Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice) | |
| SetCctOperatingMode | Property to set the CCT operating mode. | |
| SIMPLDeviceImplementation |
Internal protected member used for actual device control.
(Inherited from GenericDevice) | |
| ThreeByteCommandNoResponseFeedback |
Property to indicate that no response has been received after triggering the 3-byte command using Execute(Byte, Byte, Byte) method.
The DriverSigEventChange event will trigger with ThreeByteCommandNoResponseFeedbackEventId. | |
| ThreeByteCommandResponseFeedback |
8-bit response to the last executed 3-byte command. The high-order byte of the response is ignored.
The DriverSigEventChange event will trigger with ThreeByteCommandResponseReceivedEventId. | |
| ThreeByteCommandResponseValidFeedback |
Property to indicate that the 3-byte command Response contains valid data. The data is sent from
the other DALI controller in response to an Execute(Byte, Byte, Byte) command.
The DriverSigEventChange event will trigger with ThreeByteCommandResponseValidFeedbackEventId. | |
| TwoByteCommandNoResponseFeedback |
Property to indicate that no response has been received after triggering a 2-byte command using Execute(Byte, Byte).
The DriverSigEventChange event will trigger with TwoByteCommandNoResponseFeedbackEventId. | |
| TwoByteCommandResponseFeedback |
8-bit response to the last executed 2-byte query command. The high-order byte of the response is ignored.
The DriverSigEventChange event will trigger with TwoByteCommandResponseReceivedEventId. | |
| TwoByteCommandResponseValidFeedback |
Property to indicate that the 2-byte command Response contains valid data.
The DriverSigEventChange event will trigger with TwoByteCommandResponseValidFeedbackEventId. | |
| Type |
Property to determine to type of device this is.
(Inherited from GenericDevice) | |
| UnRegistrationFailureReason |
Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from GenericBase) | |
| XioEndpointStubSIMPLDevice |
The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the
correct place in hierarchy.
(Inherited from GenericDevice) |