Click or drag to resize

CnAmpx16x60 Properties

The CnAmpx16x60 type exposes the following members.

Properties
 NameDescription
Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from GenericDevice)
Public propertyEnableRoomAudio Property to return the collection which can enables audio to the corresponding room.

Set 'True' to corresponding collection index to enable audio. Set 'False' to corresponding collection index to disable audio.


(Inherited from CnAmpxXBase)
Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyLeftSigLevelFeedback Property that reports the samples and displays the left audio levels for the room defined by RoomToMonitor.

The levels are updated intermittently, not continuously, and thus are not suitable for real-time display of audio levels.

The BaseEvent event will trigger with LeftSigLevelFeedbackEventId.


(Inherited from CnAmpxXBase)
Public propertyMainPower Property to power on and off the main operating power to the CNAMPX circuitry.

True = Power On; False = Power Off.


(Inherited from CnAmpxBase)
Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyOverrideFeedback Property to indicates that the amplifier is in override mode.

True = In override mode, False = In standard mode.

The BaseEvent event will trigger with OverrideFeedbackEventId.


(Inherited from CnAmpxBase)
Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Public propertyRightSigLevelFeedback Property that reports the samples and displays the right audio levels for the room defined by RoomToMonitor.

The levels are updated intermittently, not continuously, and thus are not suitable for real-time display of audio levels.

The BaseEvent event will trigger with RightSigLevelFeedbackEventId.


(Inherited from CnAmpxXBase)
Public propertyRoomAmpFaultFeedback Property that return the collection that indicates an over-current or temperature fault in the corresponding room.

When a fault occurs, all audio to the amplifier is cut and the unit will attempt to reset after a short period.

If the reset fails the problem must be resolved manually before audio can be restored.

Get 'True' to corresponding collection index to if Amp fault is there, else 'False'.

The BaseEvent event will trigger with RoomAmpFaultFeedbackEventId and Index gives the index into the RoomAmpFaultFeedback collection.


(Inherited from CnAmpxXBase)
Public propertyRoomToMonitor Property to select the room to be monitored via the LeftSigLevelFeedback and RightSigLevelFeedback outputs.

Valid analog values are defined in enum eRoomMonitor.


(Inherited from CnAmpxXBase)
Public propertyRoomWireFaultFeedback Property that return the collection that a fault in the wires or cables of the corresponding amplifier.

When a fault occurs, all audio to the amplifier is cut and the CNAMPX unit will attempt to reset after a short period.

If the reset fails the problem must be resolved manually before audio can be restored.

Get 'True' to corresponding collection index to if Wire fault is there, else 'False'.

The BaseEvent event will trigger with RoomWireFaultFeedbackEventId and Index gives the index into the RoomWireFaultFeedback collection.


(Inherited from CnAmpxXBase)
Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertyTemperatureFormat Property to set the temperature format to Celsius or Fahrenheit.

True = Temperature format is Celsius, False = Temperature format is Fahrenheit.


(Inherited from CnAmpxBase)
Public propertyTemperatureReportEnabled Property to enable and disable the temperature reporting (via the TemperatureX10Feedback.

True = Enable temperature reporting, False = Disable temperature reporting.


(Inherited from CnAmpxBase)
Public propertyTemperatureX10Feedback Property that reports the internal temperature of the amplifier in tenths of a degree (1d = 0.1 degree, e.g. 700d = 70.0 degrees), and updates the value every two seconds for as long as TemperatureReportEnabled is high.

The temperature is displayed in the format specified by TemperatureFormat.

The BaseEvent event will trigger with TemperatureX10FeedbackEventId.


(Inherited from CnAmpxBase)
Public propertyType Property to determine to type of device this is.
(Inherited from GenericDevice)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Top
See Also