Cn |
public sealed class CnAmpx16x60 : CnAmpxXBase
The CnAmpx16x60 type exposes the following members.
| Name | Description | |
|---|---|---|
| CnAmpx16x60(UInt32, CrestronControlSystem) | Constructor to create a new CnAmpx16x60 object. | |
| CnAmpx16x60(UInt32, IDeviceBranch) | Constructor to create a new CnAmpx16x60 object. |
| Name | Description | |
|---|---|---|
| ConnectedIpList |
A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID.
This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null.
If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected.
The order of items in this list is not guaranteed.
(Inherited from GenericDevice) | |
| Description |
Get/Set the description of this device.
(Inherited from GenericBase) | |
| Disposed |
Property to indicate if the device has been disposed.
(Inherited from GenericDevice) | |
| EnableRoomAudio |
Property to return the collection which can enables audio to the corresponding room.
Set 'True' to corresponding collection index to enable audio. Set 'False' to corresponding collection index to disable audio. (Inherited from CnAmpxXBase) | |
| ID |
Property to get the ID of the device.
(Inherited from GenericDevice) | |
| IsOnline |
Property to get the current online state of the device.
(Inherited from GenericDevice) | |
| LeftSigLevelFeedback |
Property that reports the samples and displays the left audio levels for the room defined by RoomToMonitor.
The levels are updated intermittently, not continuously, and thus are not suitable for real-time display of audio levels. The BaseEvent event will trigger with LeftSigLevelFeedbackEventId. (Inherited from CnAmpxXBase) | |
| MainPower |
Property to power on and off the main operating power to the CNAMPX circuitry.
True = Power On; False = Power Off. (Inherited from CnAmpxBase) | |
| Name |
Get the name of this device.
(Inherited from GenericBase) | |
| OverrideFeedback |
Property to indicates that the amplifier is in override mode.
True = In override mode, False = In standard mode. The BaseEvent event will trigger with OverrideFeedbackEventId. (Inherited from CnAmpxBase) | |
| Parent |
The parent that a given object was added to.
(Inherited from GenericBase) | |
| Registerable |
Property to indicate that this device can be registered.
(Inherited from GenericDevice) | |
| Registered |
Property to get the current registration state of the device.
(Inherited from GenericDevice) | |
| RegistrationFailureReason |
Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice) | |
| RightSigLevelFeedback |
Property that reports the samples and displays the right audio levels for the room defined by RoomToMonitor.
The levels are updated intermittently, not continuously, and thus are not suitable for real-time display of audio levels. The BaseEvent event will trigger with RightSigLevelFeedbackEventId. (Inherited from CnAmpxXBase) | |
| RoomAmpFaultFeedback |
Property that return the collection that indicates an over-current or temperature fault in the corresponding room.
When a fault occurs, all audio to the amplifier is cut and the unit will attempt to reset after a short period. If the reset fails the problem must be resolved manually before audio can be restored. Get 'True' to corresponding collection index to if Amp fault is there, else 'False'. The BaseEvent event will trigger with RoomAmpFaultFeedbackEventId and Index gives the index into the RoomAmpFaultFeedback collection. (Inherited from CnAmpxXBase) | |
| RoomToMonitor |
Property to select the room to be monitored via the LeftSigLevelFeedback and RightSigLevelFeedback outputs.
Valid analog values are defined in enum eRoomMonitor. (Inherited from CnAmpxXBase) | |
| RoomWireFaultFeedback |
Property that return the collection that a fault in the wires or cables of the corresponding amplifier.
When a fault occurs, all audio to the amplifier is cut and the CNAMPX unit will attempt to reset after a short period. If the reset fails the problem must be resolved manually before audio can be restored. Get 'True' to corresponding collection index to if Wire fault is there, else 'False'. The BaseEvent event will trigger with RoomWireFaultFeedbackEventId and Index gives the index into the RoomWireFaultFeedback collection. (Inherited from CnAmpxXBase) | |
| SIMPLDeviceImplementation |
Internal protected member used for actual device control.
(Inherited from GenericDevice) | |
| TemperatureFormat |
Property to set the temperature format to Celsius or Fahrenheit.
True = Temperature format is Celsius, False = Temperature format is Fahrenheit. (Inherited from CnAmpxBase) | |
| TemperatureReportEnabled |
Property to enable and disable the temperature reporting (via the TemperatureX10Feedback.
True = Enable temperature reporting, False = Disable temperature reporting. (Inherited from CnAmpxBase) | |
| TemperatureX10Feedback |
Property that reports the internal temperature of the amplifier in tenths of a degree (1d = 0.1 degree, e.g. 700d = 70.0 degrees), and updates the value every two seconds for as long as TemperatureReportEnabled is high.
The temperature is displayed in the format specified by TemperatureFormat. The BaseEvent event will trigger with TemperatureX10FeedbackEventId. (Inherited from CnAmpxBase) | |
| Type |
Property to determine to type of device this is.
(Inherited from GenericDevice) | |
| UnRegistrationFailureReason |
Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from GenericBase) | |
| XioEndpointStubSIMPLDevice |
The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the
correct place in hierarchy.
(Inherited from GenericDevice) |
| Name | Description | |
|---|---|---|
| Dispose |
Clean up of resources.
(Inherited from GenericBase) | |
| Dispose(Boolean) |
Method to perform the actual disposing of the device.
(Inherited from GenericDevice) | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize |
Destructor of the device.
(Inherited from GenericDevice) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| OnBaseEvent(Int32) |
Protected member used to fire the BaseEvent with the default extended information.
(Inherited from GenericBase) | |
| OnBaseEvent(Int32, UInt16) |
Protected member used to fine the BaseEvent with extended event information.
(Inherited from GenericBase) | |
| Register |
Register this device with the system.
(Inherited from GenericDevice) | |
| ToString |
Return the name of the device.
(Inherited from GenericDevice) | |
| UnRegister |
Unregister this device with the system. This function can not be called from the device's own SigChange event handler.
On successful unregistration, if this device supports the OnlineStatusChange event, it will trigger indicating the device when offline. (Inherited from GenericDevice) |
| Name | Description | |
|---|---|---|
| BaseEvent |
Generic base event, triggered when the there are no other handlers available
for a specific EventID.
(Inherited from GenericBase) | |
| IpInformationChange |
Event that tells what IP Address is connected/disconnected from an IP ID for a non-UDP device.
This is only valid for an Ethernet device. An exception will be thrown if it is not.
(Inherited from GenericDevice) | |
| OnlineStatusChange |
Event triggered when the Online status of the device changes.
(Inherited from GenericDevice) |