Click or drag to resize

Tpmc12TouchOutReservedSigs Class

Touch Out reserved sigs for TPMC-12
Inheritance Hierarchy
SystemObject
  Crestron.SimplSharpProDeviceExtender
    Crestron.SimplSharpPro.UITpmc12TouchOutReservedSigs

Namespace: Crestron.SimplSharpPro.UI
Assembly: Crestron.SimplSharpPro.DeviceSupport (in Crestron.SimplSharpPro.DeviceSupport.dll) Version: 2.21.121
Syntax
C#
public sealed class Tpmc12TouchOutReservedSigs : DeviceExtender

The Tpmc12TouchOutReservedSigs type exposes the following members.

Properties
 NameDescription
Protected propertyBooleanInput Bool Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyBooleanOutput Bool Outputs on the device extender.
(Inherited from DeviceExtender)
Public propertyChannelCompositeCh Specifies the target pad area. Pad areas are defined in the Design tab of the properties for a Video object in VTPro-e. The number of pad areas the target supports differs depending on the panel. Valid values range from 0d (Pad Area 1) to 7d (Pad Area 8). A value of 0d should be used for a mouse cursor on a PC using the "UPDD XP Driver" format.
Public propertyChannelCompositeQm Specifies the target pad area. Pad areas are defined in the Design tab of the properties for a Video object in VTPro-e. The number of pad areas the target supports differs depending on the panel. Valid values range from 0d (Pad Area 1) to 7d (Pad Area 8). A value of 0d should be used for a mouse cursor on a PC using the "UPDD XP Driver" format.
Public propertyChannelSvidCh Specifies the target pad area. Pad areas are defined in the Design tab of the properties for a Video object in VTPro-e. The number of pad areas the target supports differs depending on the panel. Valid values range from 0d (Pad Area 1) to 7d (Pad Area 8). A value of 0d should be used for a mouse cursor on a PC using the "UPDD XP Driver" format.
Public propertyChannelSvidQm Specifies the target pad area. Pad areas are defined in the Design tab of the properties for a Video object in VTPro-e. The number of pad areas the target supports differs depending on the panel. Valid values range from 0d (Pad Area 1) to 7d (Pad Area 8). A value of 0d should be used for a mouse cursor on a PC using the "UPDD XP Driver" format.
Public propertyChannelYPbPrCh Specifies the target pad area. Pad areas are defined in the Design tab of the properties for a Video object in VTPro-e. The number of pad areas the target supports differs depending on the panel. Valid values range from 0d (Pad Area 1) to 7d (Pad Area 8). A value of 0d should be used for a mouse cursor on a PC using the "UPDD XP Driver" format.
Public propertyChannelYPbPrQm Specifies the target pad area. Pad areas are defined in the Design tab of the properties for a Video object in VTPro-e. The number of pad areas the target supports differs depending on the panel. Valid values range from 0d (Pad Area 1) to 7d (Pad Area 8). A value of 0d should be used for a mouse cursor on a PC using the "UPDD XP Driver" format.
Public propertyDestinationCompositeCh Sets the destination for the touch output. Valid values range from 2d to 254d as follows: 2d = Cresnet 3d to 254d = Ethernet Device ID (this value should match the Device ID entered in the IP Table of the panel.) Out of range values are ignored.
Public propertyDestinationCompositeQm Sets the destination for the touch output. Valid values range from 2d to 254d as follows: 2d = Cresnet 3d to 254d = Ethernet Device ID (this value should match the Device ID entered in the IP Table of the panel.) Out of range values are ignored.
Public propertyDestinationSvidCh Sets the destination for the touch output. Valid values range from 2d to 254d as follows: 2d = Cresnet 3d to 254d = Ethernet Device ID (this value should match the Device ID entered in the IP Table of the panel.) Out of range values are ignored.
Public propertyDestinationSvidQm Sets the destination for the touch output. Valid values range from 2d to 254d as follows: 2d = Cresnet 3d to 254d = Ethernet Device ID (this value should match the Device ID entered in the IP Table of the panel.) Out of range values are ignored.
Public propertyDestinationYPbPrCh Sets the destination for the touch output. Valid values range from 2d to 254d as follows: 2d = Cresnet 3d to 254d = Ethernet Device ID (this value should match the Device ID entered in the IP Table of the panel.) Out of range values are ignored.
Public propertyDestinationYPbPrQm Sets the destination for the touch output. Valid values range from 2d to 254d as follows: 2d = Cresnet 3d to 254d = Ethernet Device ID (this value should match the Device ID entered in the IP Table of the panel.) Out of range values are ignored.
Public propertyFormatCompositeCh Sets the touch output format of the corresponding video source at QM IN and CH IN to "Touch the PC V2" format. Valid values are: 3d = UPDD XP Driver 6d = Remote Annotation Driver Touch the PC allows the panel to control the cursor and mouse functions of an external PC via a Video window object defined in VTPro-e. The PC can be connected to the panel ONLY through an intermediary control system which in turn is connected via a COM port to the PC, and is connected to the panel via Cresnet or Ethernet. (The TPMC-12 has no RS-232 or COM interface.)
Public propertyFormatCompositeQm Sets the touch output format of the corresponding video source at QM IN and CH IN to "Touch the PC V2" format. Valid values are: 3d = UPDD XP Driver 6d = Remote Annotation Driver Touch the PC allows the panel to control the cursor and mouse functions of an external PC via a Video window object defined in VTPro-e. The PC can be connected to the panel ONLY through an intermediary control system which in turn is connected via a COM port to the PC, and is connected to the panel via Cresnet or Ethernet. (The TPMC-12 has no RS-232 or COM interface.)
Public propertyFormatSvidCh Sets the touch output format of the corresponding video source at QM IN and CH IN to "Touch the PC V2" format. Valid values are: 3d = UPDD XP Driver 6d = Remote Annotation Driver Touch the PC allows the panel to control the cursor and mouse functions of an external PC via a Video window object defined in VTPro-e. The PC can be connected to the panel ONLY through an intermediary control system which in turn is connected via a COM port to the PC, and is connected to the panel via Cresnet or Ethernet. (The TPMC-12 has no RS-232 or COM interface.)
Public propertyFormatSvidQm Sets the touch output format of the corresponding video source at QM IN and CH IN to "Touch the PC V2" format. Valid values are: 3d = UPDD XP Driver 6d = Remote Annotation Driver Touch the PC allows the panel to control the cursor and mouse functions of an external PC via a Video window object defined in VTPro-e. The PC can be connected to the panel ONLY through an intermediary control system which in turn is connected via a COM port to the PC, and is connected to the panel via Cresnet or Ethernet. (The TPMC-12 has no RS-232 or COM interface.)
Public propertyFormatYPbPrCh Sets the touch output format of the corresponding video source at QM IN and CH IN to "Touch the PC V2" format. Valid values are: 3d = UPDD XP Driver 6d = Remote Annotation Driver Touch the PC allows the panel to control the cursor and mouse functions of an external PC via a Video window object defined in VTPro-e. The PC can be connected to the panel ONLY through an intermediary control system which in turn is connected via a COM port to the PC, and is connected to the panel via Cresnet or Ethernet. (The TPMC-12 has no RS-232 or COM interface.)
Public propertyFormatYPbPrQm Sets the touch output format of the corresponding video source at QM IN and CH IN to "Touch the PC V2" format. Valid values are: 3d = UPDD XP Driver 6d = Remote Annotation Driver Touch the PC allows the panel to control the cursor and mouse functions of an external PC via a Video window object defined in VTPro-e. The PC can be connected to the panel ONLY through an intermediary control system which in turn is connected via a COM port to the PC, and is connected to the panel via Cresnet or Ethernet. (The TPMC-12 has no RS-232 or COM interface.)
Public propertyStringCompositeChFeedback The mouse command string which the control system routes to the external PC via the control system's COM port.
Public propertyStringCompositeQmFeedback The mouse command string which the control system routes to the external PC via the control system's COM port.
Protected propertyStringInput String Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyStringOutput String Outputs on the device extender.
(Inherited from DeviceExtender)
Public propertyStringSvidChFeedback The mouse command string which the control system routes to the external PC via the control system's COM port.
Public propertyStringSvidQmFeedback The mouse command string which the control system routes to the external PC via the control system's COM port.
Public propertyStringYPbPrChFeedback The mouse command string which the control system routes to the external PC via the control system's COM port.
Public propertyStringYPbPrQmFeedback The mouse command string which the control system routes to the external PC via the control system's COM port.
Protected propertyUShortInput UShort Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortOutput UShort Outputs on the device extender.
(Inherited from DeviceExtender)
Top
Methods
 NameDescription
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Protected methodInitializeJoins Initialize the Joins
(Overrides DeviceExtenderInitializeJoins)
Protected methodMapAnalogInputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapAnalogOutputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapDigitalInputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapDigitalOutputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapSerialInputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapSerialOutputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodSendCueEventDataForDeviceExtender Function to trigger the DeviceExtender Sig Change event
(Inherited from DeviceExtender)
Public methodToStringReturns a string that represents the current object.
(Inherited from Object)
Public methodUse Set the extender as usable on the device. Call this method before registration of the device.
(Inherited from DeviceExtender)
Top
Events
 NameDescription
Public eventDeviceExtenderSigChange Event to receive sig information intended for a device extender. When processing this event, it will hold off other sigs from being received from the device. If one desires to continue processing the data and receive more information, launch a new thread and allow this event to exit.
(Inherited from DeviceExtender)
Top
Fields
 NameDescription
Protected field_InUse Bool to determine if the extended is in use by the user.
(Inherited from DeviceExtender)
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also