Tpmc |
The Tpmc12TouchOutReservedSigs type exposes the following members.
| Name | Description | |
|---|---|---|
| BooleanInput |
Bool Inputs on the device extender.
(Inherited from DeviceExtender) | |
| BooleanOutput |
Bool Outputs on the device extender.
(Inherited from DeviceExtender) | |
| ChannelCompositeCh | Specifies the target pad area. Pad areas are defined in the Design tab of the properties for a Video object in VTPro-e. The number of pad areas the target supports differs depending on the panel. Valid values range from 0d (Pad Area 1) to 7d (Pad Area 8). A value of 0d should be used for a mouse cursor on a PC using the "UPDD XP Driver" format. | |
| ChannelCompositeQm | Specifies the target pad area. Pad areas are defined in the Design tab of the properties for a Video object in VTPro-e. The number of pad areas the target supports differs depending on the panel. Valid values range from 0d (Pad Area 1) to 7d (Pad Area 8). A value of 0d should be used for a mouse cursor on a PC using the "UPDD XP Driver" format. | |
| ChannelSvidCh | Specifies the target pad area. Pad areas are defined in the Design tab of the properties for a Video object in VTPro-e. The number of pad areas the target supports differs depending on the panel. Valid values range from 0d (Pad Area 1) to 7d (Pad Area 8). A value of 0d should be used for a mouse cursor on a PC using the "UPDD XP Driver" format. | |
| ChannelSvidQm | Specifies the target pad area. Pad areas are defined in the Design tab of the properties for a Video object in VTPro-e. The number of pad areas the target supports differs depending on the panel. Valid values range from 0d (Pad Area 1) to 7d (Pad Area 8). A value of 0d should be used for a mouse cursor on a PC using the "UPDD XP Driver" format. | |
| ChannelYPbPrCh | Specifies the target pad area. Pad areas are defined in the Design tab of the properties for a Video object in VTPro-e. The number of pad areas the target supports differs depending on the panel. Valid values range from 0d (Pad Area 1) to 7d (Pad Area 8). A value of 0d should be used for a mouse cursor on a PC using the "UPDD XP Driver" format. | |
| ChannelYPbPrQm | Specifies the target pad area. Pad areas are defined in the Design tab of the properties for a Video object in VTPro-e. The number of pad areas the target supports differs depending on the panel. Valid values range from 0d (Pad Area 1) to 7d (Pad Area 8). A value of 0d should be used for a mouse cursor on a PC using the "UPDD XP Driver" format. | |
| DestinationCompositeCh | Sets the destination for the touch output. Valid values range from 2d to 254d as follows: 2d = Cresnet 3d to 254d = Ethernet Device ID (this value should match the Device ID entered in the IP Table of the panel.) Out of range values are ignored. | |
| DestinationCompositeQm | Sets the destination for the touch output. Valid values range from 2d to 254d as follows: 2d = Cresnet 3d to 254d = Ethernet Device ID (this value should match the Device ID entered in the IP Table of the panel.) Out of range values are ignored. | |
| DestinationSvidCh | Sets the destination for the touch output. Valid values range from 2d to 254d as follows: 2d = Cresnet 3d to 254d = Ethernet Device ID (this value should match the Device ID entered in the IP Table of the panel.) Out of range values are ignored. | |
| DestinationSvidQm | Sets the destination for the touch output. Valid values range from 2d to 254d as follows: 2d = Cresnet 3d to 254d = Ethernet Device ID (this value should match the Device ID entered in the IP Table of the panel.) Out of range values are ignored. | |
| DestinationYPbPrCh | Sets the destination for the touch output. Valid values range from 2d to 254d as follows: 2d = Cresnet 3d to 254d = Ethernet Device ID (this value should match the Device ID entered in the IP Table of the panel.) Out of range values are ignored. | |
| DestinationYPbPrQm | Sets the destination for the touch output. Valid values range from 2d to 254d as follows: 2d = Cresnet 3d to 254d = Ethernet Device ID (this value should match the Device ID entered in the IP Table of the panel.) Out of range values are ignored. | |
| FormatCompositeCh | Sets the touch output format of the corresponding video source at QM IN and CH IN to "Touch the PC V2" format. Valid values are: 3d = UPDD XP Driver 6d = Remote Annotation Driver Touch the PC allows the panel to control the cursor and mouse functions of an external PC via a Video window object defined in VTPro-e. The PC can be connected to the panel ONLY through an intermediary control system which in turn is connected via a COM port to the PC, and is connected to the panel via Cresnet or Ethernet. (The TPMC-12 has no RS-232 or COM interface.) | |
| FormatCompositeQm | Sets the touch output format of the corresponding video source at QM IN and CH IN to "Touch the PC V2" format. Valid values are: 3d = UPDD XP Driver 6d = Remote Annotation Driver Touch the PC allows the panel to control the cursor and mouse functions of an external PC via a Video window object defined in VTPro-e. The PC can be connected to the panel ONLY through an intermediary control system which in turn is connected via a COM port to the PC, and is connected to the panel via Cresnet or Ethernet. (The TPMC-12 has no RS-232 or COM interface.) | |
| FormatSvidCh | Sets the touch output format of the corresponding video source at QM IN and CH IN to "Touch the PC V2" format. Valid values are: 3d = UPDD XP Driver 6d = Remote Annotation Driver Touch the PC allows the panel to control the cursor and mouse functions of an external PC via a Video window object defined in VTPro-e. The PC can be connected to the panel ONLY through an intermediary control system which in turn is connected via a COM port to the PC, and is connected to the panel via Cresnet or Ethernet. (The TPMC-12 has no RS-232 or COM interface.) | |
| FormatSvidQm | Sets the touch output format of the corresponding video source at QM IN and CH IN to "Touch the PC V2" format. Valid values are: 3d = UPDD XP Driver 6d = Remote Annotation Driver Touch the PC allows the panel to control the cursor and mouse functions of an external PC via a Video window object defined in VTPro-e. The PC can be connected to the panel ONLY through an intermediary control system which in turn is connected via a COM port to the PC, and is connected to the panel via Cresnet or Ethernet. (The TPMC-12 has no RS-232 or COM interface.) | |
| FormatYPbPrCh | Sets the touch output format of the corresponding video source at QM IN and CH IN to "Touch the PC V2" format. Valid values are: 3d = UPDD XP Driver 6d = Remote Annotation Driver Touch the PC allows the panel to control the cursor and mouse functions of an external PC via a Video window object defined in VTPro-e. The PC can be connected to the panel ONLY through an intermediary control system which in turn is connected via a COM port to the PC, and is connected to the panel via Cresnet or Ethernet. (The TPMC-12 has no RS-232 or COM interface.) | |
| FormatYPbPrQm | Sets the touch output format of the corresponding video source at QM IN and CH IN to "Touch the PC V2" format. Valid values are: 3d = UPDD XP Driver 6d = Remote Annotation Driver Touch the PC allows the panel to control the cursor and mouse functions of an external PC via a Video window object defined in VTPro-e. The PC can be connected to the panel ONLY through an intermediary control system which in turn is connected via a COM port to the PC, and is connected to the panel via Cresnet or Ethernet. (The TPMC-12 has no RS-232 or COM interface.) | |
| StringCompositeChFeedback | The mouse command string which the control system routes to the external PC via the control system's COM port. | |
| StringCompositeQmFeedback | The mouse command string which the control system routes to the external PC via the control system's COM port. | |
| StringInput |
String Inputs on the device extender.
(Inherited from DeviceExtender) | |
| StringOutput |
String Outputs on the device extender.
(Inherited from DeviceExtender) | |
| StringSvidChFeedback | The mouse command string which the control system routes to the external PC via the control system's COM port. | |
| StringSvidQmFeedback | The mouse command string which the control system routes to the external PC via the control system's COM port. | |
| StringYPbPrChFeedback | The mouse command string which the control system routes to the external PC via the control system's COM port. | |
| StringYPbPrQmFeedback | The mouse command string which the control system routes to the external PC via the control system's COM port. | |
| UShortInput |
UShort Inputs on the device extender.
(Inherited from DeviceExtender) | |
| UShortOutput |
UShort Outputs on the device extender.
(Inherited from DeviceExtender) |