Shade |
The ShadeExtendedStatus type exposes the following members.
| Name | Description | |
|---|---|---|
| BatteryAboveLowFeedback |
Property to indicate that the remaining battery capacity is approximately greater than or equal to 25%.
The ExtendedStatusChange event will trigger with BatteryAboveLowEventId. 'true' = battery remaining capacity is approximately greater than or equal to 25%;
'false' = battery remaining capacity is approximately not greater than or equal to 25% | |
| BatteryAnalogDisablePush | Property to disable periodic push of BatteryLevelFeedback and BatteryCapacityLeftFeedback properties. | |
| BatteryAnalogDisablePushFeedback |
Property to indicate that the periodic push of BatteryLevelFeedback and BatteryCapacityLeftFeedback is disabled.
true: periodic push of BatteryLevelFeedback and BatteryCapacityLeftFeedback is disabled
false: periodic push of BatteryLevelFeedback and BatteryCapacityLeftFeedback is enabled
The ExtendedStatusChange event will trigger with BatteryAnalogDisablePushEventId. | |
| BatteryCapacityLeftFeedback |
Property to return the estimated remaining percentage of full capacity. 100% = 65535.
Will be pushed a few times a day and when BatteryAboveLowFeedback, BatteryLowFeedback or BatteryUnusableFeedback properties change, if BatteryAnalogDisablePush property value is false.
Use "SimplSharpDeviceHelper.PercentToUshort" to convert the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert
the ushort value to percentage.
The ExtendedStatusChange event will trigger with BatteryCapacityLeftFeedbackEventId. | |
| BatteryLevelFeedback |
Property to return the current battery level. unsigned 0.01 volts per count. Value 100 means 100 * 0.01 volts = 1 volts.
This property is not supported by [!:CsmQmtdc1633SgRc].
Will be pushed a few times a day and when BatteryAboveLowFeedback, BatteryLowFeedback or BatteryUnusableFeedback properties change, if BatteryAnalogDisablePush property value is false.
The ExtendedStatusChange event will trigger with BatteryLevelFeedbackEventId. | |
| BatteryLowFeedback |
Property to indicate that the battery remaining capacity is approximately less than 25%.
The ExtendedStatusChange event will trigger with BatteryLowEventId. 'true' = battery remaining capacity is approximately less than 25%; 'false' = battery remaining capacity is not approximately less than 25% | |
| BatteryUnusableFeedback |
Property to indicate that the battery is too low to move motor.
'true' battery is too low to move motor; 'false': battery is not too low to move motor The ExtendedStatusChange event will trigger with BatteryUnusableEventId. | |
| ConnectedRemotes | Property to send out the command to motor querying number of remotes connected to the motor. This property is only supported by [!:CsmQmtdc1633SgRc]. | |
| ConnectedRemotesFeedback |
Property to indicate the feedback from motor querying number of remotes connected to the motor.
Property value is 0 means no remotes connected
Property value is greater than or equal to 1 means at least one remote connected
This property is only supported by [!:CsmQmtdc1633SgRc].
The ExtendedStatusChange event will trigger with ConnectedRemotesFeedbackEventId. | |
| PairRemote | Property to send out the "Remote Pairing Mode" command to Wistar motor. This command puts the motor in pairing mode for 3 seconds and then it will time out. This property is only supported by [!:CsmQmtdc1633SgRc]. | |
| PairRemoteFeedback |
Property to indicate the feedback from motor containing the status of pairing mode.
This property is only supported by [!:CsmQmtdc1633SgRc].
The ExtendedStatusChange event will trigger with PairRemoteFeedbackEventId. | |
| Parent | Parent switch | |
| PowerSourceFeedback |
Property to report the power source.
'true': Reserved for Future Use; 'false': Battery
This property is not supported by [!:CsmQmtdc1633SgRc].
The ExtendedStatusChange event will trigger with PowerSourceEventId. | |
| UserSpecifiedObject | User specified object |