Crestron. |
| Class | Description | |
|---|---|---|
| BasicShadeSettingEventIds | Event Ids used on the BasicShadeSettings that will trigger the ShadeSettingsPropertyChange event. | |
| BasicShadeSettings |
Basic shade configuration object.
This class will trigger ShadeSettingsPropertyChange event. | |
| C2nSdc | The C2nSdc module operates two bi-directional motors (labeled Shade 1 and Shade 2) that control shades and drapes. This will fire the"BaseEvent" with the event Id's defined in ShadeDrapeControllerEventIds. | |
| C2nSdcDc | The C2nSdcDc module operates two bi-directional motors (labeled Shade 1 and Shade 2) that control shades and drapes. This device uses DC power to control the motors This will fire the"BaseEvent" with the event Id's defined in ShadeDrapeControllerEventIds. | |
| C2nSsc2 | The C2nSsc2 shade control module communicates with up to two Somfy ILT Intelligent Shade Motors, via two RJ-11 connectors labeled Shade 1 and Shade 2. The module controls the position and direction of motion of each shade, with programmable settings for the upper and lower limits of travel for each shade. Commands to move to a specific location will position the shades relative to the full range of travel between these upper and lower limits. Subsequent commands to move a shade in the open or close direction will activate shade movement until a limit of travel is reached, the command is de-activated, or a stop command is sent. The C2sSsc2 supports up to 20 shade presets. This will fire the"BaseEvent" with the event Id's defined in ShadeDrapeControllerEventIds. | |
| C2nSxcBaseClass | Base class for the C2nSxC family of shade and drape controllers. This will fire the"BaseEvent" with the event Id's defined in ShadeDrapeControllerEventIds. | |
| CscAccn |
Crestron AC Powered Cresnet CSC-ACN Shade Control.
This class will trigger BaseEvent and ShadeSettingsPropertyChange events. | |
| CscAcEx |
Crestron AC Powered RF CSC-ACEX Shade Control.
This class will trigger BaseEvent and ShadeSettingsPropertyChange events. | |
| CscDccn |
The CSC-DCCN Shade Control allow for control of the position and direction of Crestron's QMT30 shades.
This class will trigger BaseEvent and ShadeSettingsPropertyChange events. | |
| CscDcEx |
The CSC-DCEX Shade Control allow for control of the position and direction of Crestron's QMT30 shades.
This class will trigger BaseEvent and ShadeSettingsPropertyChange events. | |
| CscDrpcn |
The CSC-DRPCN Drapery Control allow for control of the position and direction of motion of the drapery
This class will trigger BaseEvent event. | |
| CscDrpEx |
The CSC-DRPEX Drapery Control allow for control of the position and direction of motion of the drapery
This class will trigger BaseEvent event. | |
| CsmQmt50Dccn |
The CSM-QMT50-DCCN Shade Control allow for control of the position and direction of Crestron's QMT50 shades.
This class will trigger BaseEvent and ShadeSettingsPropertyChange events. | |
| CsmQmt50DcEx |
The CSM-QMT50-DCEX Shade Control allow for control of the position and direction of Crestron's QMT50 shades.
This class will trigger BaseEvent and ShadeSettingsPropertyChange events. | |
| CsmQmtdc1631Cn |
Cresnet based 1Nm digital QMT shade motor for 17.5-Inch roller shades and larger, with Digital Quiet Motor Technology.
This class will trigger BaseEvent and ShadeSettingsPropertyChange events. | |
| CsmQmtdc1631Ex |
infiNET EX based 1Nm digital QMT shade motor for 17.5-Inch roller shades and larger , with Digital Quiet Motor Technology.
This class will trigger BaseEvent and ShadeSettingsPropertyChange events. | |
| CsmQmtdc1631Sg |
1Nm digital QMT shade motor for 17.5-Inch roller shades and larger, with Digital Quiet Motor Technology for SubGigaHertz Gateway.
This class will trigger BaseEvent, ExtendedStatusChange and ShadeSettingsPropertyChange events. | |
| CsmQmtdc2562Cn |
Cresnet based 2 Nm Digital QMT Shade Motor for 21-Inch Roller Shades and Larger, with Digital Quiet Motor Technology.
This class will trigger BaseEvent and ShadeSettingsPropertyChange events. | |
| CsmQmtdc2562Ex |
infiNET EX based 2 Nm Digital QMT Shade Motor for 21-Inch Roller Shades and Larger, with Digital Quiet Motor Technology.
This class will trigger BaseEvent and ShadeSettingsPropertyChange events. | |
| CsmQmtdc2564Cn |
Cresnet based 4 Nm Digital QMT Shade Motor for 21-Inch Roller Shades and Larger, with Digital Quiet Motor Technology.
This class will trigger BaseEvent and ShadeSettingsPropertyChange events. | |
| CsmQmtdc2564Ex |
infiNET EX based 4 Nm Digital QMT Shade Motor for 21-Inch Roller Shades and Larger, with Digital Quiet Motor Technology.
This class will trigger BaseEvent and ShadeSettingsPropertyChange events. | |
| CsmQmtdcCnBaseClass | Base class for the CsmQmtdc2562Cn, CsmQmtdc2564Cn and the CsmQmtdc1631Cn devices. | |
| CsmQmtdcDrp3Cn |
Cresnet based digital QMT drapery track motor for Drapery tracks up to 16 feet. It allows for control of the position and direction of motion of the drapery
This class will trigger BaseEvent event. | |
| CsmQmtdcDrp3Ex |
infiNET EX based digital QMT drapery track motor for Drapery tracks up to 16 feet. It allows for control of the position and direction of motion of the drapery
This class will trigger BaseEvent event. | |
| CsmQmtdcExBaseClass | Base class for the CsmQmtdc2562Ex, CsmQmtdc2564Ex, CsmQmtdc1631Ex and the "CsmQmtdc2564Sg" devices. | |
| CsmQmtdcHsheerCn | Cresnet based 1Nm digital QMT shade motor for 17.5-Inch roller shades and larger, with Digital Quiet Motor Technology, and Horizontal Sheer Tilt Control. This class will trigger BaseEvent and ShadeSettingsPropertyChange events. | |
| CsmQmtdcHsheerEx | infiNET EX based 1Nm digital QMT shade motor for 17.5-Inch roller shades and larger , with Digital Quiet Motor Technology, and Horizontal Sheer Tilt Control. This class will trigger BaseEvent and ShadeSettingsPropertyChange events. | |
| ShadeDrapeController | Shade Drape Controller | |
| ShadeDrapeControllerEventIds | Event Ids used on the C2nSxcBaseClass that will trigger the "BaseEvent" event. | |
| ShadeExtendedStatus |
Shade Extended Status class.
This class will trigger ExtendedStatusChange event. | |
| ShadeWithBasicSettings |
Base class for shades that contain the basic shade settings.
This class will trigger BaseEvent and ShadeSettingsPropertyChange events. |
| Enumeration | Description | |
|---|---|---|
| ShadeExtendedStatuseStatusOfRemotePairingMode | Enum to define the status of remote pairing mode. |