Dmc |
The DmcStrCresnet type exposes the following members.
| Name | Description | |
|---|---|---|
| AudioMuteFeedback |
Indicates that the output audio is muted.
The BaseEvent event will trigger with AudioMuteEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with AudioMuteEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| AudioUnmuteFeedback |
Indicates that the output audio is not muted.
The BaseEvent event will trigger with AudioUnmuteEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with AudioUnmuteEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| Bass |
Sets the bass level for the audio output.
Valid values range from -150 (-15dB) to +150 (+15dB), where 1 = 0.1dB.
(Inherited from DmcStr) | |
| BassFeedback |
Reports the bass level for the audio output.
The BaseEvent event will trigger with BassEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with BassEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| ConnectedIpList |
A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID.
This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null.
If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected.
The order of items in this list is not guaranteed.
(Inherited from GenericDevice) | |
| ContentLanFeedback |
Reports the current content LAN mode.
The BaseEvent event will trigger with DisableDhcpEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with DisableDhcpEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| ContentLanLinkStatusFeedback |
Indicates if an Ethernet link is detected at the content LAN input of the DmcStr.
'true = Ethernet link detected; 'false = Ethernet link not detected.
The BaseEvent event will trigger with ContentLanLinkStatusEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with ContentLanLinkStatusEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| ContentLanMode |
Sets the Content LAN Mode. (Sets which interface to use for streaming)
(Inherited from DmcStr) | |
| Control |
The object of common stream control class DmcStriControl.
The BaseEvent event will trigger with DMInputEventIds for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with DMInputEventIds when the DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| CurrentDefaultRouterFeedback |
Reports the default router address of the encoder.
The default router address is given in dot decimal notation.
The BaseEvent event will trigger with CurrentDefaultRouterEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with CurrentDefaultRouterEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| CurrentDomainnameFeedback |
Reports the current domain name of the encoder.
The BaseEvent event will trigger with CurrentDomainNameEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with CurrentDomainNameEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| CurrentDomainNameServer |
Property to set the current DNS Server that is to be used by the encoder. Maximum length is 200.
(Inherited from DmcStr) | |
| CurrentDomainNameServerFeedback |
Reports the current DNS server that is used by the encoder.
The BaseEvent event will trigger with DomainNameServerEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with DomainNameServerEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| CurrentIpAddressFeedback |
Reports the current IP address of the encoder.
The IP address is given in dot decimal notation.
The BaseEvent event will trigger with CurrentIpAddressEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with CurrentIpAddressEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| CurrentIpv6AddressFeedback |
Property to return the current IPv6 Address.
The BaseEvent event will trigger with CurrentIpv6AddressEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with CurrentIpv6AddressEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| CurrentSubnetMaskFeedback |
Reports the current subnet mask of the encoder.
The subnet mask is given in dot decimal notation.
The BaseEvent event will trigger with CurrentSubnetMaskEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with CurrentSubnetMaskEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| DacOutVolume |
Property to set the DAC Out Volume.
(Inherited from DmcStr) | |
| DacOutVolumeFeedback |
Property to report the current DAC Out Volume.
The BaseEvent event will trigger with DacVolumeEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with DacVolumeEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| Delay |
Sets the delay value.
Valid values range from 0 (0ms) to 400 (40ms), where 1 = 0.1ms.
(Inherited from DmcStr) | |
| DelayFeedback |
Returns the delay value.
The BaseEvent event will trigger with DelayEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with DelayEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| Description |
Get/Set the description of this device.
(Inherited from GenericBase) | |
| DisableDhcpFeedback |
Indicates that DHCP (dynamic IP addressing) is disabled.
'true = DHCP Disabled; 'false' = DHCP Enabled
The BaseEvent event will trigger with DisableDhcpEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with DisableDhcpEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| Disposed |
Property to indicate if the device has been disposed.
(Inherited from GenericDevice) | |
| EnableDhcpFeedback |
Indicates that DHCP (dynamic IP addressing) on the encoder is enabled.
'true = DHCP Enabled; 'false' = DHCP Disabled
The BaseEvent event will trigger with EnableDhcpEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with EnableDhcpEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| HdmiOut | InputCardHdmiOutPort for this DmcStr.
(Inherited from DmcStr) | |
| HostName |
Sets the hostname of the encoder.
The hostname can consist of up to 63 characters with no spaces.
Valid characters are 0 – 9, A – Z and hyphen. The hostname cannot begin with a hyphen or number.
(Inherited from DmcStr) | |
| HostNameFeedback |
Reports the hostname of the encoder.
The BaseEvent event will trigger with HostNameEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with HostNameEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| ID |
Property to get the ID of the device.
(Inherited from GenericDevice) | |
| IsOnline |
Property to get the current online state of the device.
(Inherited from GenericDevice) | |
| Name |
Get the name of this device.
(Inherited from GenericBase) | |
| NtpServer |
Property to set the NTP Server. The maximum length is 200.
(Inherited from DmcStr) | |
| NtpServerFeedback |
Property to return the NTP Server.
The BaseEvent event will trigger with NtpServerEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with NtpServerEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| OsdDisableFeedback |
Property to indicate that the OSD is disabled.
The BaseEvent event will trigger with OsdDisableEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with OsdDisableEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| OsdEnableFeedback |
Property to indicate that the OSD is enabled.
The BaseEvent event will trigger with OsdEnableEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with OsdEnableEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| OsdLocation |
Property to set the OSD location.
(Inherited from DmcStr) | |
| OsdLocationFeedback |
Property to report the current OSD location.
The BaseEvent event will trigger with OsdLocationEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with OsdLocationEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| OsdText |
Property to set the OSD Text. Maximum length is 200.
(Inherited from DmcStr) | |
| OsdTextFeedback |
Property to return the current OSD Text.
The BaseEvent event will trigger with OsdTextEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with OsdTextEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| OsdXPosition |
Property to set the OSD X Position. Valid range is 0-1920 in pixels.
(Inherited from DmcStr) | |
| OsdXPositionFeedback |
Property to report the current OSD X Position.
The BaseEvent event will trigger with OsdXPositionEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with OsdXPositionEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| OsdYPosition |
Property to set the OSD Y Position. Valid range is 0-1200.
(Inherited from DmcStr) | |
| OsdYPositionFeedback |
Property to report the current OSD Y Position.
The BaseEvent event will trigger with OsdYPositionEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with OsdYPositionEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| Parent |
The parent that a given object was added to.
(Inherited from GenericBase) | |
| Registerable |
Property to indicate that this device can be registered.
(Inherited from GenericDevice) | |
| Registered |
Property to get the current registration state of the device.
(Inherited from GenericDevice) | |
| RegistrationFailureReason |
Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice) | |
| Resolution |
Property to set the resolution of the screen.
(Inherited from DmcStr) | |
| ResolutionFeedback |
Property to report the current screen resolution.
The BaseEvent event will trigger with ResolutionEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with ResolutionEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| RtpAudioPort |
Property to set the RTSP Audio Port.
(Inherited from DmcStr) | |
| RtpAudioPortFeedback |
Property to report the current RTSP Audio Port.
The BaseEvent event will trigger with RtpAudioPortEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with RtpAudioPortEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| RtpVideoPort |
Property to set the RTSP Video Port.
(Inherited from DmcStr) | |
| RtpVideoPortFeedback |
Property to report the current RTSP Video Port.
The BaseEvent event will trigger with RtpVideoPortEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with RtpVideoPortEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| RtspPort |
Property to set the RTSP Port.
(Inherited from DmcStr) | |
| RtspPortFeedback |
Property to report the current RTSP Port.
The BaseEvent event will trigger with RtspPortEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with RtspPortEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| SIMPLDeviceImplementation |
Internal protected member used for actual device control.
(Inherited from GenericDevice) | |
| Source |
Source present on this DmcStr.
(Inherited from DmcStr) | |
| StaticDefaultRouter |
Sets the static default router address of the encoder.
Note that these settings will only be used when DHCP is disabled!
(Inherited from DmcStr) | |
| StaticDefaultRouterFeedback |
Report the static default router address of the encoder.
The default router address is given in dot decimal notation.
The BaseEvent event will trigger with StaticDefaultRouterEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with StaticDefaultRouterEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| StaticDomainName |
Sets the static domain name of the encoder.
The domain name should be set according to the requirements of the network administrator.
Note that the StaticDomainName will only be used when DHCP is disabled!
(Inherited from DmcStr) | |
| StaticDomainNameFeedback |
Reports the static domain name of the encoder.
The BaseEvent event will trigger with StaticDomainNameEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with StaticDomainNameEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| StaticDomainNameServer |
Sets the static DNS (Domain Name Server) that the encoder will use.
The string format is in dot decimal notation.
Note that the StaticDomainNameServer will only be used when DHCP is disabled!
(Inherited from DmcStr) | |
| StaticDomainNameServerFeedback |
Reports the static DNS server that is used by the encoder.
The BaseEvent event will trigger with StaticDomainNameServerEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with StaticDomainNameServerEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| StaticIpAddress |
Sets the static IP address of the encoder.
Note that these settings will only be used when DHCP is disabled!
(Inherited from DmcStr) | |
| StaticIpAddressFeedback |
Report the static IP address of the encoder.
The IP address is given in dot decimal notation.
The BaseEvent event will trigger with StaticIpAddressEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with StaticIpAddressEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| StaticIpv6Address |
Property to set the Static IPv6 Address. The maximum length is 200.
(Inherited from DmcStr) | |
| StaticIpv6AddressFeedback |
Property to report the current Static IPv6 Address.
The BaseEvent event will trigger with StaticIpv6AddressEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with StaticIpv6AddressEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| StaticSubnetMask |
Sets the static subnet mask of the encoder.
Note that these settings will only be used when DHCP is disabled!
(Inherited from DmcStr) | |
| StaticSubnetMaskFeedback |
Report the static subnet mask of the encoder.
The subnet mask is given in dot decimal notation.
The BaseEvent event will trigger with StaticSubnetMaskEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with StaticSubnetMaskEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| StatisticsDisableFeedback |
Property to indicate that the Statistics is disabled.
The BaseEvent event will trigger with StatisticsDisableEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with StatisticsDisableEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| StatisticsEnableFeedback |
Property to indicate that the Statistics is enabled.
The BaseEvent event will trigger with StatisticsEnableEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with StatisticsEnableEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| StatisticsNumberOfAudioPacketsDroppedFeedback |
Property to report the Number of Audio Packets Dropped.
The BaseEvent event will trigger with StatisticsNumberOfAudioPacketsDroppedEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with StatisticsNumberOfAudioPacketsDroppedEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| StatisticsNumberOfAudioPacketsReceivedFeedback |
Property to report the Number of Audio Packets Received.
The BaseEvent event will trigger with StatisticsNumberOfAudioPacketsReceivedEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with StatisticsNumberOfAudioPacketsReceivedEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| StatisticsNumberOfVideoPacketsDroppedFeedback |
Property to report the Number of Video Packets Dropped.
The BaseEvent event will trigger with StatisticsNumberOfVideoPacketsDroppedEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with StatisticsNumberOfVideoPacketsDroppedEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| StatisticsNumberOfVideoPacketsReceivedFeedback |
Property to report the Number of Video Packets Received.
The BaseEvent event will trigger with StatisticsNumberOfVideoPacketsReceivedEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with StatisticsNumberOfVideoPacketsReceivedEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| StreamFramesPerSecondFeedback |
Property to report the current Stream Frames Per Second value. The values reported are between 0-85 Hz.
The BaseEvent event will trigger with StreamFramesPerSecondEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with StreamFramesPerSecondEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| StreamHorizontalResolutionFeedback |
Property to report the current Stream Horizontal Resolution in pixels.
The values reported are between 0-1920.
The BaseEvent event will trigger with StreamHorizontalResolutionEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with StreamHorizontalResolutionEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| StreamVerticalResolutionFeedback |
Property to report the current Stream Vertical Resolution.
The values reported are between 0-1200.
The BaseEvent event will trigger with StreamVerticalResolutionEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with StreamVerticalResolutionEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| Switcher |
Switcher this card is attached to.
(Inherited from CardDevice) | |
| SwitcherInputOutput |
Reference back to this cards corresponding switcher input or output.
(Inherited from CardDevice) | |
| TimesetMethod |
Property to set the Timeset Method.
(Inherited from DmcStr) | |
| TimesetMethodFeedback |
Property to report the current Timeset Method.
The BaseEvent event will trigger with TimesetMethodEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with TimesetMethodEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| TimeZone |
Property to set the current Time Zone.
(Inherited from DmcStr) | |
| TimeZoneFeedback |
Property to report the current Time Zone.
The BaseEvent event will trigger with TimeZoneEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with TimeZoneEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| Treble |
Sets the treble level for the audio output.
Valid values range from -150 (-15dB) to +150 (+15dB), where 1 = 0.1dB.
(Inherited from DmcStr) | |
| TrebleFeedback |
Reports the treble level for the audio output.
The BaseEvent event will trigger with TrebleEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with TrebleEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| TsPort |
Property to set the TS Port.
(Inherited from DmcStr) | |
| TsPortFeedback |
Property to report the current TS Port.
The BaseEvent event will trigger with TsPortEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with TsPortEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| Type |
The type of card created
(Inherited from CardDevice) | |
| UnRegistrationFailureReason |
Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from GenericBase) | |
| Volume |
Sets the volume level as a percentage.
Valid values range from 0 to 100%.
(Inherited from DmcStr) | |
| VolumeFeedback |
Reports the volume level.
The BaseEvent event will trigger with VolumeEventId for DMCI Version of DmcStr or DmcStrCresnet. The DMInputChange event will trigger with VolumeEventId when this DmcStr is connected to a Switch. (Inherited from DmcStr) | |
| XioEndpointStubSIMPLDevice |
The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the
correct place in hierarchy.
(Inherited from GenericDevice) |