Click or drag to resize

Dmps3SipDialer Properties

The Dmps3SipDialer type exposes the following members.

Properties
 NameDescription
Public propertyBusyFeedback Indicates that the line being called is busy. The DialerChange event is triggered with the BusyFeedbackEventId
(Inherited from Dmps3Dialer)
Public propertyCallActiveFeedback Indicates that the outgoing call has connected and is active. The DialerChange event is triggered with the CallActiveFeedbackEventId
(Inherited from Dmps3Dialer)
Public propertyCallTerminatedFeedback Indicates that a call has been terminated for any reason. The DialerChange event is triggered with the CallTerminatedFeedbackEventId
(Inherited from Dmps3Dialer)
Public propertyCommandString Reserved for future use.
Public propertyCommandStringFeedback Reserved for future use.
Public propertyConnectedFeedback Indicates that this dialer has a valid POTS or SIP Connection. The DialerChange event is triggered with the ConnectedFeedbackEventId
(Inherited from Dmps3Dialer)
Public propertyDialingFeedback Indicates that the dialer is currently dialing or connecting.
(Inherited from Dmps3Dialer)
Public propertyDialString The phone number, SIP extension, group page, or URI to dial.
(Inherited from Dmps3Dialer)
Public propertyDoNotDisturbFeedback Report the current do not disturb state of the dialer.
(Inherited from Dmps3Dialer)
Public propertyCode exampleGroupDial Used to dial multiple devices at once. All devices in the group will ring. Once one answers, the remaining calls will be terminated.
Public propertyHoldFeedback Indicates that the current call is on hold. The DialerChange event is triggered with the HoldFeedbackEventId
Public propertyIncomingCallDetectedFeedback Indicates if there is an incoming call. The DialerChange event is triggered with the IncomingCallDetectedFeedbackEventId
(Inherited from Dmps3Dialer)
Public propertyIncomingCallerInformationFeedback Indicates information about the current incoming call. The DialerChange event is triggered with the IncomingCallerInformationFeedbackEventId
(Inherited from Dmps3Dialer)
Public propertyIncomingCallFeedbackObsolete.
Indicates information about the current incoming call. The DialerChange event is triggered with the IncomingCallerInformationFeedbackEventId
(Inherited from Dmps3Dialer)
Public propertyIncomingFeedbackObsolete.
Indicates if there is an incoming call. The DialerChange event is triggered with the IncomingCallDetectedFeedbackEventId
(Inherited from Dmps3Dialer)
Public propertyInit Set SIP configuration parameters.
Public propertyMyURIFeedback The URI of the touch screen, which allows direct connection to a CEN-NVS200 or other devices. The DialerChange event is triggered with the MyURIFeedbackEventId
Public propertyOwner Owner of this object. On the Dmps3 systems, this is set to the CardDmps3DialerOutput.
(Inherited from Dmps3Dialer)
Public propertyRingbackFeedback Indicates that the outgoing call is ringing. The DialerChange event is triggered with the RingbackFeedbackEventId
(Inherited from Dmps3Dialer)
Public propertyRingingFeedback Indicates that an incoming call is waiting to be answered or declined. The DialerChange event is triggered with the RingingFeedbackEventId
(Inherited from Dmps3Dialer)
Public propertyType Indicates the eDialerType type of dialer this object represents.
(Inherited from Dmps3Dialer)
Top
See Also