Dmc |
The DmcVid4 type exposes the following members.
| Name | Description | |
|---|---|---|
| Cameras | The camera VideoAttributes | |
| ConnectedIpList |
A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID.
This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null.
If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected.
The order of items in this list is not guaranteed.
(Inherited from GenericDevice) | |
| Description |
Get/Set the description of this device.
(Inherited from GenericBase) | |
| DisableFullSizeImageCycleFeedback | Indicates that cycle mode is disabled. The output remains 'true for as long as cycle mode is disabled. | |
| Disposed |
Property to indicate if the device has been disposed.
(Inherited from GenericDevice) | |
| EnableFullSizeImageCycleFeedback | Indicates that the display is currently in cycle mode. The output remains 'true' for as long as the display is cycling. 'true' = Cycle mode enabled; 'false' = Cycle mode released | |
| FullSizeImageFeedback | Indicates that the screen is currently in full-size mode. The output remains 'true' for as long as the image is in full size. 'true' = Full-size active; 'false' = Full-size release | |
| HdmiOutput | HDMI out port | |
| ID |
Property to get the ID of the device.
(Inherited from GenericDevice) | |
| ImageRotateRate | Specifies the rate in seconds (1d = 1s) for cycling between camera inputs when cycle mode is enabled ("Enable_Full_Size_Image_Cycle" = 'true'). Valid values range from 0 (no cycling) to 300 (300 seconds). | |
| ImageRotateRateFeedback | Reports the image cycle rate. | |
| IsOnline |
Property to get the current online state of the device.
(Inherited from GenericDevice) | |
| MultiviewImageFeedback | Indicates that the screen is set to multi-view mode. The output remains 'true' for as long as the video is being displayed in multi-view mode. | |
| Name |
Get the name of this device.
(Inherited from GenericBase) | |
| OnlineFeedback | Indicates whether the card is online or offline; that is, whether it is running properly (responding to polls) on the internal network. The output will remain 'true' for as long as the card is online. 'true = Card online (running); 'false' = Card offline (not running) | |
| Parent |
The parent that a given object was added to.
(Inherited from GenericBase) | |
| PresentFeedback | Indicates whether the card is physically plugged into the card slot on the DM switcher. The output will remain 'true' for as long as the card is detected. 'true = Card present; 'false' = Card not installed. | |
| Registerable |
Property to indicate that this device can be registered.
(Inherited from GenericDevice) | |
| Registered |
Property to get the current registration state of the device.
(Inherited from GenericDevice) | |
| RegistrationFailureReason |
Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice) | |
| SelectFullScreenImage | When full-size display is enabled ("Full_Size_Image_fb" = 'true') selects the video input to display | |
| SelectFullScreenImageFeedback | Reports the camera input currently being displayed in full-size. | |
| SIMPLDeviceImplementation |
Internal protected member used for actual device control.
(Inherited from GenericDevice) | |
| Switcher |
Switcher this card is attached to.
(Inherited from CardDevice) | |
| SwitcherInputOutput |
Reference back to this cards corresponding switcher input or output.
(Inherited from CardDevice) | |
| Type |
The type of card created
(Inherited from CardDevice) | |
| UnRegistrationFailureReason |
Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from GenericBase) | |
| XioEndpointStubSIMPLDevice |
The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the
correct place in hierarchy.
(Inherited from GenericDevice) |