Hd |
This class will trigger OutputStreamChange, DeviceInformationChange and CecChange events.
public class HdTxu4kzXxxEndpointDmLiteOutput : EndpointDmLiteOutput, IVideoAttributesEnhanced, ITxRxuEndpointOutputCommonProperties
The HdTxu4kzXxxEndpointDmLiteOutput type exposes the following members.
| Name | Description | |
|---|---|---|
| AudioChannelsFeedback |
Reports the number of audio channels detected on the stream.
This property will trigger OutputStreamChange event with AudioChannelsFeedbackEventId. | |
| AudioFormatFeedback |
Reports the detected audio format accompanying the stream.
If this property is not supported then NoAudio will be returned.
This property will trigger OutputStreamChange event with AudioFormatFeedbackEventId. | |
| AutomaticPowerSettingsDisabledFeedback |
Property to indicate that the automatic power settings timeout is disabled. This property is only used by AVF, all other controls for ADP is done through the Web UI.
The OutputStreamChange event will trigger with AutomaticPowerSettingDisabledEventId. | |
| AutomaticPowerSettingsEnabledFeedback |
Property to indicate that the automatic power settings timeout is enabled. This property is only used by AVF, all other controls for ADP is done through the Web UI.
The OutputStreamChange event will trigger with AutomaticPowerSettingEnabledEventId. | |
| BlankDisabledFeedback |
Indicates if the output video is displayed (unblanked).
This property will trigger OutputStreamChange event with BlankDisabledFeedbackEventId. | |
| BlankEnabledFeedback |
Indicates if the output video has been blanked out.
This property will trigger OutputStreamChange event with BlankEnabledFeedbackEventId. | |
| ByodModeFeedback |
Property to indicate that the state of Byod(Bring your own device) mode. default value is disabled / false.
The OutputStreamChange event will trigger with ByodModeFeedbackEventId. | |
| ConnectedDevice |
Information about the device connected to this stream.
Feedbacks for this property will trigger the DeviceInformationChange event. (Inherited from EndpointDmLiteOutput) | |
| DisabledByHdcpFeedback |
Indicates that the stream has been disabled as the result of a failure during HDCP authentication.
This occurs when HDCP (High-bandwidth Digital Content Protection) is detected at the input, but the display or other loopback device is not HDCP compliant.
This also occurs when the maximum number of display devices that can be used with the video source (based on the application of keys and KSVs) has been exceeded.
This property will trigger OutputStreamChange event with DisabledByHdcpFeedbackEventId. (Inherited from EndpointDmLiteOutput) | |
| DmLiteMode | Property to set the DM Lite mode. Power to device is under HW control, based on the device type connected, it will control the power. - Compatible connections: o DM Lite endpoint o Cascade o HDBaseT endpoint (Projector, DM endpoint etc.) HDBaseT Mode: Power is not present - Compatible connections: o HDBaseT endpoint (Projector, DM endpoint etc.) | |
| DmLiteModeFeedback |
Property to report the current DM Lite mode in use.
Power to device is under HW control. Based on the device type connected, it will control the power.
- Compatible connections:
o DM Lite endpoint
o Cascade
o HDBaseT endpoint (Projector, DM endpoint etc.)
HDBaseT Mode:
Power is not present
- Compatible connections:
o HDBaseT endpoint (Projector, DM endpoint etc.)
The OutputStreamChange event will trigger with DmLiteModeFeedbackEventId. | |
| Endpoint |
Endpoint device this output stream is a part of.
(Inherited from EndpointOutputStream) | |
| HdcpTransmitterMode |
Sets the HDCP Transmitter Mode for the output.
This property may not be supported for the specified device.
(Inherited from EndpointDmLiteOutput) | |
| HdcpTransmitterModeFeedback |
Reports the HDCP Transmitter Mode of the output.
If this property is not supported "eHdcpTransmitterMode.NotSupported" shall be returned.
The OutputStreamChange event will trigger for with HdcpTransmitterModeFeedbackEventId. (Inherited from EndpointDmLiteOutput) | |
| HotplugDetectedFeedback |
Indicates that a "hot plug" has been detected.
'true' = Hot plug detected; 'false' = Hot plug not detected.
The OutputStreamChange event will trigger with HotplugDetectedEventId. | |
| InputPrioritiesFeedback |
Property to return the current input priorities for this output in an array.
Number of inputs are from 1 to 4 and depends on the device type and the valid priority values are from 0 to 9.
To access input 2 use priority follow the below logic...
byte[] inputPiorities = InputPrioritiesFeedback;
inputPiorities[2 - 1] returns the priority of the input 2.
The OutputStreamChange event will trigger with InputPrioritiesFeedbackEventId. | |
| MuteFeedback |
Property to report the muted status of the output.
The OutputStreamChange event will trigger for with AudioMuteFeedbackEventId. | |
| Name | Property to set the DM Lite Out port name. | |
| NameFeedback |
Property that returns the DM Lite Out port name.
The BaseEvent event will trigger with "EndpointTransmitterBase.DmLiteOutNameFeedbackEventId". | |
| OccupancyDetectedFeedback |
Property to indicate if occupancy is detected, valid when occupancy detect source is control system.
true: occupancy detected; false: occupancy not detected
The OutputStreamChange event will trigger with OccupancyDetectedEventId. | |
| OutputDisabledFeedback |
Property to report the turned off status of the DM Lite output.
The OutputStreamChange event will trigger for with HdmiOutDisabledFeedbackEventId. | |
| OutputEnabledFeedback |
Property to report the turned on status of the DM Lite output.
The OutputStreamChange event will trigger for with HdmiOutEnabledFeedbackEventId. | |
| RemoteReceiverDetectedFeedback |
Property to indicate that remote receiver or DM Lite link is detected at the output.
The property value remains "true" for as long as the receiver or DM Lite link is detected.
true = Receiver or DM Lite link detected; false = Receiver or DM Lite link not detected
The OutputStreamChange event will trigger for with RemoteReceiverDetectedEventId. | |
| SinkHdcpCapabilityFeedback |
Property to report the downstream sink/display HDCP version.
The OutputStreamChange event will trigger with SinkHdcpCapabilityFeedbackEventId. | |
| StreamCec |
CEC information sent and received by the DM Lite port.
Feedbacks for this property will trigger the CecChange event. (Inherited from EndpointDmLiteOutput) | |
| StreamType |
Get the type of stream this object represents.
(Inherited from EndpointOutputStream) | |
| TransmittingFeedback |
Indicates that video is being transmitted on the stream.
The OutputStreamChange event will trigger with TransmittingFeedbackEventId. | |
| UnmuteFeedback |
Property to report the unmuted status of the output.
The OutputStreamChange event will trigger for with AudioUnmuteFeedbackEventId. | |
| VacancyDetectedFeedback |
Property to indicate if vacancy is detected, valid when vacancy detect source is control system.
true: vancancy detected; false: vacancy not detected
The OutputStreamChange event will trigger with VacancyDetectedEventId. | |
| VideoAttributes |
Enhanced video attribute information for this stream.
Feedbacks for this property will trigger the AttributeChange event. |
| Name | Description | |
|---|---|---|
| DetectOccupancy | Method to detect occupancy, valid when occupancy detect source is control system. | |
| DetectVacancy | Method to detect vacancy, valid when vacancy detect source is control system. | |
| DisableAutomaticPowerSettings | Method to disable the automatic power settings timeout. This method is only used by AVF, all other controls for ADP is done through the Web UI. | |
| DisableBlank | Display (unblank) the output video. | |
| DisableOutput | Method to turn off the DM Lite output. | |
| EnableAutomaticPowerSettings | Method to enable the automatic power settings timeout. This method is only used by AVF, all other controls for ADP is done through the Web UI. | |
| EnableBlank | Blanks out the output video. | |
| EnableOutput | Method to turn on the DM Lite output. | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| InputPriorities | Method to set the input priorities for this output. Input Priorities are based on number of inputs. Example : if a device has 4 inputs and 2 outputs then the priority serial = byte[]{0,1,2,0} means Input 1 = Not used Input 2 = Priority 1 Input 3 = Priority 2 Input 4 = Not used | |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) | |
| Mute | Method to mute the output. | |
| ToString |
Return a string representing this input stream's location.
(Inherited from EndpointOutputStream) | |
| Unmute | Method to unmute the output. |
| Name | Description | |
|---|---|---|
| OutputStreamChange |
Event fired when one of the feedbacks have changed for this output stream.
EventIds for this event are located in the EndpointOutputStreamEventIds class.
(Inherited from EndpointOutputStream) |