Click or drag to resize

HdTxu4kzXxxEndpointDmLiteOutput Properties

The HdTxu4kzXxxEndpointDmLiteOutput type exposes the following members.

Properties
 NameDescription
Public propertyAudioChannelsFeedback Reports the number of audio channels detected on the stream.

This property will trigger OutputStreamChange event with AudioChannelsFeedbackEventId.

Public propertyAudioFormatFeedback Reports the detected audio format accompanying the stream. If this property is not supported then NoAudio will be returned.

This property will trigger OutputStreamChange event with AudioFormatFeedbackEventId.

Public propertyAutomaticPowerSettingsDisabledFeedback Property to indicate that the automatic power settings timeout is disabled. This property is only used by AVF, all other controls for ADP is done through the Web UI.

The OutputStreamChange event will trigger with AutomaticPowerSettingDisabledEventId.

Public propertyAutomaticPowerSettingsEnabledFeedback Property to indicate that the automatic power settings timeout is enabled. This property is only used by AVF, all other controls for ADP is done through the Web UI.

The OutputStreamChange event will trigger with AutomaticPowerSettingEnabledEventId.

Public propertyBlankDisabledFeedback Indicates if the output video is displayed (unblanked).

This property will trigger OutputStreamChange event with BlankDisabledFeedbackEventId.

Public propertyBlankEnabledFeedback Indicates if the output video has been blanked out.

This property will trigger OutputStreamChange event with BlankEnabledFeedbackEventId.

Public propertyByodModeFeedback Property to indicate that the state of Byod(Bring your own device) mode. default value is disabled / false.

The OutputStreamChange event will trigger with ByodModeFeedbackEventId.

Public propertyConnectedDevice Information about the device connected to this stream.

Feedbacks for this property will trigger the DeviceInformationChange event.


(Inherited from EndpointDmLiteOutput)
Public propertyDisabledByHdcpFeedback Indicates that the stream has been disabled as the result of a failure during HDCP authentication. This occurs when HDCP (High-bandwidth Digital Content Protection) is detected at the input, but the display or other loopback device is not HDCP compliant. This also occurs when the maximum number of display devices that can be used with the video source (based on the application of keys and KSVs) has been exceeded.

This property will trigger OutputStreamChange event with DisabledByHdcpFeedbackEventId.


(Inherited from EndpointDmLiteOutput)
Public propertyDmLiteMode Property to set the DM Lite mode. Power to device is under HW control, based on the device type connected, it will control the power. - Compatible connections: o DM Lite endpoint o Cascade o HDBaseT endpoint (Projector, DM endpoint etc.) HDBaseT Mode: Power is not present - Compatible connections: o HDBaseT endpoint (Projector, DM endpoint etc.)
Public propertyDmLiteModeFeedback Property to report the current DM Lite mode in use. Power to device is under HW control. Based on the device type connected, it will control the power. - Compatible connections: o DM Lite endpoint o Cascade o HDBaseT endpoint (Projector, DM endpoint etc.) HDBaseT Mode: Power is not present - Compatible connections: o HDBaseT endpoint (Projector, DM endpoint etc.)

The OutputStreamChange event will trigger with DmLiteModeFeedbackEventId.

Public propertyEndpoint Endpoint device this output stream is a part of.
(Inherited from EndpointOutputStream)
Public propertyHdcpTransmitterMode Sets the HDCP Transmitter Mode for the output. This property may not be supported for the specified device.
(Inherited from EndpointDmLiteOutput)
Public propertyHdcpTransmitterModeFeedback Reports the HDCP Transmitter Mode of the output. If this property is not supported "eHdcpTransmitterMode.NotSupported" shall be returned.

The OutputStreamChange event will trigger for with HdcpTransmitterModeFeedbackEventId.


(Inherited from EndpointDmLiteOutput)
Public propertyHotplugDetectedFeedback Indicates that a "hot plug" has been detected. 'true' = Hot plug detected; 'false' = Hot plug not detected.

The OutputStreamChange event will trigger with HotplugDetectedEventId.

Public propertyInputPrioritiesFeedback Property to return the current input priorities for this output in an array. Number of inputs are from 1 to 4 and depends on the device type and the valid priority values are from 0 to 9. To access input 2 use priority follow the below logic... byte[] inputPiorities = InputPrioritiesFeedback; inputPiorities[2 - 1] returns the priority of the input 2.

The OutputStreamChange event will trigger with InputPrioritiesFeedbackEventId.

Public propertyMuteFeedback Property to report the muted status of the output.

The OutputStreamChange event will trigger for with AudioMuteFeedbackEventId.

Public propertyName Property to set the DM Lite Out port name.
Public propertyNameFeedback Property that returns the DM Lite Out port name.

The BaseEvent event will trigger with "EndpointTransmitterBase.DmLiteOutNameFeedbackEventId".

Public propertyOccupancyDetectedFeedback Property to indicate if occupancy is detected, valid when occupancy detect source is control system. true: occupancy detected; false: occupancy not detected

The OutputStreamChange event will trigger with OccupancyDetectedEventId.

Public propertyOutputDisabledFeedback Property to report the turned off status of the DM Lite output.

The OutputStreamChange event will trigger for with HdmiOutDisabledFeedbackEventId.

Public propertyOutputEnabledFeedback Property to report the turned on status of the DM Lite output.

The OutputStreamChange event will trigger for with HdmiOutEnabledFeedbackEventId.

Public propertyRemoteReceiverDetectedFeedback Property to indicate that remote receiver or DM Lite link is detected at the output. The property value remains "true" for as long as the receiver or DM Lite link is detected. true = Receiver or DM Lite link detected; false = Receiver or DM Lite link not detected

The OutputStreamChange event will trigger for with RemoteReceiverDetectedEventId.

Public propertySinkHdcpCapabilityFeedback Property to report the downstream sink/display HDCP version.

The OutputStreamChange event will trigger with SinkHdcpCapabilityFeedbackEventId.

Public propertyStreamCec CEC information sent and received by the DM Lite port.

Feedbacks for this property will trigger the CecChange event.


(Inherited from EndpointDmLiteOutput)
Public propertyStreamType Get the type of stream this object represents.
(Inherited from EndpointOutputStream)
Public propertyTransmittingFeedback Indicates that video is being transmitted on the stream.

The OutputStreamChange event will trigger with TransmittingFeedbackEventId.

Public propertyUnmuteFeedback Property to report the unmuted status of the output.

The OutputStreamChange event will trigger for with AudioUnmuteFeedbackEventId.

Public propertyVacancyDetectedFeedback Property to indicate if vacancy is detected, valid when vacancy detect source is control system. true: vancancy detected; false: vacancy not detected

The OutputStreamChange event will trigger with VacancyDetectedEventId.

Public propertyVideoAttributes Enhanced video attribute information for this stream.

Feedbacks for this property will trigger the AttributeChange event.

Top
See Also