Click or drag to resize

CrestronControlSystemDmps3OutputMixerWithMonoAndStereo Class

This class contains methods, properties, and event handlers for a DM Switcher output mixer. In addition to the base Dmps3OutputMixer class, it also provides control and feedback for mono/stereo.
Inheritance Hierarchy
SystemObject
  Crestron.SimplSharpPro.DeviceSupportOutputMixerBase
    Crestron.SimplSharpProCrestronControlSystemDmps3OutputMixer
      Crestron.SimplSharpProCrestronControlSystemDmps3OutputMixerWithMonoAndStereo

Namespace: Crestron.SimplSharpPro
Assembly: SimplSharpPro (in SimplSharpPro.dll) Version: 2.21.121
Syntax
C#
public class Dmps3OutputMixerWithMonoAndStereo : CrestronControlSystemDmps3OutputMixer

The CrestronControlSystemDmps3OutputMixerWithMonoAndStereo type exposes the following members.

Properties
 NameDescription
Public propertyDelay Sets the delay level. Valid values range from 0 (0ms) to 850 (85ms). Delay is supported on mixers that are on CardDmps3ProgramOutput and CardDmps3AuxOutput outputs.
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyDelayFeedback Reports the current delay level. Valid values range from 0 (0ms) to 850 (85ms). Delay feedback is supported on mixers that are on CardDmps3ProgramOutput and CardDmps3AuxOutput outputs.
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyMaxVolume Specifies the maximum volume gain, in tenths of a dB. The MinVolume and MaxVolume properties allow endpoints to be set for volume control. Typically, this property would not be used since the minimum volume can be set through the Front Panel Setup Menus or using the DM Tool in Toolbox. Valid values range from -300 (-30dB) to 100 (10dB).
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyMaxVolumeFeedback Reports the current maximum volume gain, in tenths of a dB. Valid values range from -300 (-30dB) to 100 (10dB).
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyMicLevel Property to set the value of the level for a given microphone on this output.
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyMicLevelFeedback Property to read the feedback level for a given microphone on this output.
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyMicMuteOffFeedback Property to return the state of the MicMuteOffFeedback for a given microphone on this output
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyMicMuteOnFeedback Property to return the state of the MicMuteOnFeedback for a given microphone on this output.
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyMicPan Property to set the value of the pan for a given microphone on this output.
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyMicPanFeedback Property to read the pan level for a given microphone on this output.
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyMinVolume Specifies the minimum volume gain, in tenths of a dB. The MinVolume and MaxVolume properties allow endpoints to be set for volume control. Typically, this property would not be used since the minimum volume can be set through the Front Panel Setup Menus or using the DM Tool in Toolbox. Valid values range from -800 (-80dB) to -400 (-40dB).
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyMinVolumeFeedback Reports the current minimum volume gain, in tenths of a dB. Valid values range from -800 (-80dB) to -400 (-40dB).
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyMixerBypassedFeedback Indicates that the routed audio input is in mixer bypass mode. Mixer bypass mode allows advanced audio to pass through the HDMI switch. The DMPS3 mixers only support stereo PCM. On digital outputs, this means that the audio is routed directly from the audio source without passing through the mixer. The microphone mix and audio controls are not available. On analog outputs the selected source audio will be muted. Mixer bypass mode is only controllable via the DMPS Tool.
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyMonoOutputFeedback Indicates that the DM output is in mono. The output remains true for as long as mono mode is active. This output will be asserted whether mono mode is enabled via MonoOutput() method or if the Program Output is set to 70V/100V mode.
Public propertyOutputMixerType The type of Output Mixer available. See the definition of IOutputMixer interface for more information.
(Inherited from OutputMixerBase)
Public propertyOutputVuFeedback Reports the VU meter feedback value, when VU feedback is enabled. Reported values will range from 0 to 8.
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyParent The parent that a given object was added to.
(Inherited from OutputMixerBase)
Public propertyPresetNumber Specifies the mixer preset number that will save or recall the mixing.
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyPresetReadyPulseFeedback Pulses to indicate that the system has finished recalling a preset.

The DMOutputChange event will trigger with MixerPresetReadyPulseFeedbackEventId.


(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyRecallingPresetFeedback When true, indicates that the system is in the process of recalling mixer preset.

The DMOutputChange event will trigger with RecallingMixerPresetFeedbackEventId.


(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyStartupVolume Specifies the startup volume in tenths of a dB. The startup volume is the volume level that will be set when the system is turned on. Valid values range from -800 (-80dB) to 100 (10dB).
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyStartupVolumeFeedback Reports the current startup volume in tenths of a dB. Valid values range from -800 (-80dB) to 100 (10dB).
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public propertyStereoOutputFeedback Indicates that the DM output is in stereo. The output remains true for as long as stereo mode is active.
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from OutputMixerBase)
Top
Methods
 NameDescription
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Protected methodFinalizeAllows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.
(Inherited from Object)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Protected methodMemberwiseCloneCreates a shallow copy of the current Object.
(Inherited from Object)
Public methodMicMuteOff UnMute the given microphone on this output.
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public methodMicMuteOn Mute the given microphone on this output.
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public methodMonoOutput Set the DM output to Mono Mode.
Public methodRecallPreset Recalls the mixer preset given by the MixerPresetNumber property.
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public methodSavePreset Saves the mixer preset given by the MixerPresetNumber property.
(Inherited from CrestronControlSystemDmps3OutputMixer)
Public methodStereoOutput Sets the DM output to stereo mode. This input will not have effect if the Program Output is set to 70V/100V mode.
Public methodToString String representation of this DM output mixer.
(Inherited from OutputMixerBase)
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also