Dmps |
The CrestronControlSystemDmps3OutputMixerWithMonoAndStereo type exposes the following members.
| Name | Description | |
|---|---|---|
| Delay |
Sets the delay level.
Valid values range from 0 (0ms) to 850 (85ms).
Delay is supported on mixers that are on CardDmps3ProgramOutput and CardDmps3AuxOutput outputs.
(Inherited from CrestronControlSystemDmps3OutputMixer) | |
| DelayFeedback |
Reports the current delay level.
Valid values range from 0 (0ms) to 850 (85ms).
Delay feedback is supported on mixers that are on CardDmps3ProgramOutput and CardDmps3AuxOutput outputs.
(Inherited from CrestronControlSystemDmps3OutputMixer) | |
| MaxVolume |
Specifies the maximum volume gain, in tenths of a dB. The MinVolume and MaxVolume properties allow endpoints to be set for volume control.
Typically, this property would not be used since the minimum volume can be set through the Front Panel Setup Menus or using the DM Tool in Toolbox.
Valid values range from -300 (-30dB) to 100 (10dB).
(Inherited from CrestronControlSystemDmps3OutputMixer) | |
| MaxVolumeFeedback |
Reports the current maximum volume gain, in tenths of a dB.
Valid values range from -300 (-30dB) to 100 (10dB).
(Inherited from CrestronControlSystemDmps3OutputMixer) | |
| MicLevel |
Property to set the value of the level for a given microphone on this output.
(Inherited from CrestronControlSystemDmps3OutputMixer) | |
| MicLevelFeedback |
Property to read the feedback level for a given microphone on this output.
(Inherited from CrestronControlSystemDmps3OutputMixer) | |
| MicMuteOffFeedback |
Property to return the state of the MicMuteOffFeedback for a given microphone on this output
(Inherited from CrestronControlSystemDmps3OutputMixer) | |
| MicMuteOnFeedback |
Property to return the state of the MicMuteOnFeedback for a given microphone on this output.
(Inherited from CrestronControlSystemDmps3OutputMixer) | |
| MicPan |
Property to set the value of the pan for a given microphone on this output.
(Inherited from CrestronControlSystemDmps3OutputMixer) | |
| MicPanFeedback |
Property to read the pan level for a given microphone on this output.
(Inherited from CrestronControlSystemDmps3OutputMixer) | |
| MinVolume |
Specifies the minimum volume gain, in tenths of a dB. The MinVolume and MaxVolume properties allow endpoints to be set for volume control.
Typically, this property would not be used since the minimum volume can be set through the Front Panel Setup Menus or using the DM Tool in Toolbox.
Valid values range from -800 (-80dB) to -400 (-40dB).
(Inherited from CrestronControlSystemDmps3OutputMixer) | |
| MinVolumeFeedback |
Reports the current minimum volume gain, in tenths of a dB.
Valid values range from -800 (-80dB) to -400 (-40dB).
(Inherited from CrestronControlSystemDmps3OutputMixer) | |
| MixerBypassedFeedback |
Indicates that the routed audio input is in mixer bypass mode.
Mixer bypass mode allows advanced audio to pass through the HDMI switch. The DMPS3 mixers only support stereo PCM.
On digital outputs, this means that the audio is routed directly from the audio source without passing through the mixer.
The microphone mix and audio controls are not available. On analog outputs the selected source audio will be muted.
Mixer bypass mode is only controllable via the DMPS Tool.
(Inherited from CrestronControlSystemDmps3OutputMixer) | |
| MonoOutputFeedback | Indicates that the DM output is in mono. The output remains true for as long as mono mode is active. This output will be asserted whether mono mode is enabled via MonoOutput() method or if the Program Output is set to 70V/100V mode. | |
| OutputMixerType |
The type of Output Mixer available. See the definition of IOutputMixer interface for more information.
(Inherited from OutputMixerBase) | |
| OutputVuFeedback |
Reports the VU meter feedback value, when VU feedback is enabled.
Reported values will range from 0 to 8.
(Inherited from CrestronControlSystemDmps3OutputMixer) | |
| Parent |
The parent that a given object was added to.
(Inherited from OutputMixerBase) | |
| PresetNumber |
Specifies the mixer preset number that will save or recall the mixing.
(Inherited from CrestronControlSystemDmps3OutputMixer) | |
| PresetReadyPulseFeedback |
Pulses to indicate that the system has finished recalling a preset.
The DMOutputChange event will trigger with MixerPresetReadyPulseFeedbackEventId. (Inherited from CrestronControlSystemDmps3OutputMixer) | |
| RecallingPresetFeedback |
When true, indicates that the system is in the process of recalling mixer preset.
The DMOutputChange event will trigger with RecallingMixerPresetFeedbackEventId. (Inherited from CrestronControlSystemDmps3OutputMixer) | |
| StartupVolume |
Specifies the startup volume in tenths of a dB. The startup volume is the volume level that will be set when the system is turned on.
Valid values range from -800 (-80dB) to 100 (10dB).
(Inherited from CrestronControlSystemDmps3OutputMixer) | |
| StartupVolumeFeedback |
Reports the current startup volume in tenths of a dB.
Valid values range from -800 (-80dB) to 100 (10dB).
(Inherited from CrestronControlSystemDmps3OutputMixer) | |
| StereoOutputFeedback | Indicates that the DM output is in stereo. The output remains true for as long as stereo mode is active. | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from OutputMixerBase) |