C2n |
The C2nAmp6X100 type exposes the following members.
| Name | Description | |
|---|---|---|
| AllRoomsOffFeedback |
Indicates that all rooms are off.
EventIds: AllRoomsOffFeedbackEventId will trigger to indicate change.
(Inherited from C2nAmp) | |
| AmpFaultFeedback |
Indicates a fault condition in the system.
EventIds: AmpFaultFeedbackEventId will
trigger to indicate change.
(Inherited from C2nAmp) | |
| BridgeRooms1And2OnFeedback |
Indicates the bridge status of the corresponding rooms(1+2).
EventIds: BridgeRooms1And2OnFeedbackEventId will trigger to indicate change.
(Inherited from C2nAmp) | |
| BridgeRooms3And4OnFeedback |
Indicates the bridge status of the corresponding rooms(3+4).
EventIds: BridgeRooms3And4OnFeedbackEventId will trigger to indicate change.
(Inherited from C2nAmp) | |
| BridgeRooms5And6OnFeedback |
Indicates the bridge status of the corresponding rooms(5+6).
EventIds: BridgeRooms5And6OnFeedbackEventId will trigger to indicate change.
(Inherited from C2nAmp) | |
| ConnectedIpList |
A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID.
This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null.
If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected.
The order of items in this list is not guaranteed.
(Inherited from GenericDevice) | |
| Description |
Get/Set the description of this device.
(Inherited from GenericBase) | |
| Disposed |
Property to indicate if the device has been disposed.
(Inherited from GenericDevice) | |
| ExtenderDeviceReadyReservedSigs |
Property to access the Device Ready functionality of the Swamp.
(Inherited from C2nAmp) | |
| FrontPanelLockedFeedback |
Indicates the status of the front panel buttons.
EventIds: FrontPanelLockedFeedbackEventId will trigger to indicate change.
(Inherited from C2nAmp) | |
| FrontPanelSwitchOnFeedback |
Indicates that the amplifier is turned on (front panel power switch is set to the On position).
Turning the power switch off will reset the amplifier any faults) and set all sources to zero. When
the amplifier is turned off the unit will not respond to join changes.
EventIds: FrontPanelSwitchOnFeedbackEventId will trigger to indicate change.
(Inherited from C2nAmp) | |
| ID |
Property to get the ID of the device.
(Inherited from GenericDevice) | |
| IsOnline |
Property to get the current online state of the device.
(Inherited from GenericDevice) | |
| MuteAllRoomsFeedback |
Indicates that the "mute all rooms" function is active.
EventIds: MuteAllRoomsFeedbackEventId will trigger to indicate change.
(Inherited from C2nAmp) | |
| Name |
Get the name of this device.
(Inherited from GenericBase) | |
| Parent |
The parent that a given object was added to.
(Inherited from GenericBase) | |
| Registerable |
Property to indicate that this device can be registered.
(Inherited from GenericDevice) | |
| Registered |
Property to get the current registration state of the device.
(Inherited from GenericDevice) | |
| RegistrationFailureReason |
Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice) | |
| Room |
Collection of Room related properties for this Device
(Inherited from C2nAmp) | |
| SIMPLDeviceImplementation |
Internal protected member used for actual device control.
(Inherited from GenericDevice) | |
| Source | Collection of Source related properties for this device | |
| TemperatureFaultFeedback |
Indicates a temperature fault in the amp.
EventIds: TemperatureFaultFeedbackEventId will trigger to indicate change.
(Inherited from C2nAmp) | |
| TemperatureFeedback |
When temperature reporting is enabled (TemperatureReportingEnableFeedback = true)reports the internal amplifier
temperature. The temperature is reported in degrees Fahrenheit when TemperatureFormat = low, and in degrees Celsius
when TemperatureFormat = true. Reported values will range from 25°C to 125°C (77°F to 257°F).
EventIds: TemperatureFeedbackEventId will trigger to indicate change.
(Inherited from C2nAmp) | |
| TemperatureFormat |
Sets the format for internal amp temperature reporting. When false, the format is set to Fahrenheit; when true, Celsius.
(Inherited from C2nAmp) | |
| TemperatureFormatFeedback |
Indicates the temperature format.
EventIds: TemperatureFormatFeedbackEventId
will trigger to indicate change.
(Inherited from C2nAmp) | |
| TemperatureReportingEnable |
Enables the "Temperature" property to report the internal amplifier temperature.
(Inherited from C2nAmp) | |
| TemperatureReportingEnableFeedback |
Indicates the status of temperature reporting.
EventIds:
TemperatureReportingEnableFeedbackEventId will trigger to indicate change.
(Inherited from C2nAmp) | |
| Type |
Property to determine to type of device this is.
(Inherited from GenericDevice) | |
| UnRegistrationFailureReason |
Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from GenericBase) | |
| VoltageFaultFeedback |
Indicates the status of Voltage fault.
EventIds: VoltageFaultFeedbackEventId
will trigger to indicate change.
(Inherited from C2nAmp) | |
| XioEndpointStubSIMPLDevice |
The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the
correct place in hierarchy.
(Inherited from GenericDevice) |