Click or drag to resize

C2nAmp Class

A general C2NAMP class. This would base class for C2N Amplifier devices.
Inheritance Hierarchy

Namespace: Crestron.SimplSharpPro.AudioDistribution
Assembly: Crestron.SimplSharpPro.AudioDistribution (in Crestron.SimplSharpPro.AudioDistribution.dll) Version: 2.21.121
Syntax
C#
public class C2nAmp : GenericDevice

The C2nAmp type exposes the following members.

Properties
 NameDescription
Public propertyAllRoomsOffFeedback Indicates that all rooms are off. EventIds: AllRoomsOffFeedbackEventId will trigger to indicate change.
Public propertyAmpFaultFeedback Indicates a fault condition in the system. EventIds: AmpFaultFeedbackEventId will trigger to indicate change.
Public propertyBridgeRooms1And2OnFeedback Indicates the bridge status of the corresponding rooms(1+2). EventIds: BridgeRooms1And2OnFeedbackEventId will trigger to indicate change.
Public propertyBridgeRooms3And4OnFeedback Indicates the bridge status of the corresponding rooms(3+4). EventIds: BridgeRooms3And4OnFeedbackEventId will trigger to indicate change.
Public propertyBridgeRooms5And6OnFeedback Indicates the bridge status of the corresponding rooms(5+6). EventIds: BridgeRooms5And6OnFeedbackEventId will trigger to indicate change.
Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from GenericDevice)
Public propertyExtenderDeviceReadyReservedSigs Property to access the Device Ready functionality of the Swamp.
Public propertyFrontPanelLockedFeedback Indicates the status of the front panel buttons. EventIds: FrontPanelLockedFeedbackEventId will trigger to indicate change.
Public propertyFrontPanelSwitchOnFeedback Indicates that the amplifier is turned on (front panel power switch is set to the On position). Turning the power switch off will reset the amplifier any faults) and set all sources to zero. When the amplifier is turned off the unit will not respond to join changes. EventIds: FrontPanelSwitchOnFeedbackEventId will trigger to indicate change.
Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyMuteAllRoomsFeedback Indicates that the "mute all rooms" function is active. EventIds: MuteAllRoomsFeedbackEventId will trigger to indicate change.
Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Public propertyRoom Collection of Room related properties for this Device
Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertyTemperatureFaultFeedback Indicates a temperature fault in the amp. EventIds: TemperatureFaultFeedbackEventId will trigger to indicate change.
Public propertyTemperatureFeedback When temperature reporting is enabled (TemperatureReportingEnableFeedback = true)reports the internal amplifier temperature. The temperature is reported in degrees Fahrenheit when TemperatureFormat = low, and in degrees Celsius when TemperatureFormat = true. Reported values will range from 25°C to 125°C (77°F to 257°F). EventIds: TemperatureFeedbackEventId will trigger to indicate change.
Public propertyTemperatureFormat Sets the format for internal amp temperature reporting. When false, the format is set to Fahrenheit; when true, Celsius.
Public propertyTemperatureFormatFeedback Indicates the temperature format. EventIds: TemperatureFormatFeedbackEventId will trigger to indicate change.
Public propertyTemperatureReportingEnable Enables the "Temperature" property to report the internal amplifier temperature.
Public propertyTemperatureReportingEnableFeedback Indicates the status of temperature reporting. EventIds: TemperatureReportingEnableFeedbackEventId will trigger to indicate change.
Public propertyType Property to determine to type of device this is.
(Inherited from GenericDevice)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Public propertyVoltageFaultFeedback Indicates the status of Voltage fault. EventIds: VoltageFaultFeedbackEventId will trigger to indicate change.
Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Top
Methods
 NameDescription
Public methodAllRoomsOff Turns off all room outputs. This shuts off all audio and sets all sources to zero.
Public methodBridgeRooms1And2Off Un-bridges the indicated room outputs (1+2). This returns the rooms to discrete mode.
Public methodBridgeRooms1And2On Bridges the indicated room outputs(1+2).
Public methodBridgeRooms3And4Off Un-bridges the indicated room outputs (3+4). This returns the rooms to discrete mode.
Public methodBridgeRooms3And4On Bridges the indicated room outputs(3+4).
Public methodBridgeRooms5And6Off Un-bridges the indicated room outputs (5+6). This returns the rooms to discrete mode.
Public methodBridgeRooms5And6On Bridges the indicated room outputs(5+6).
Public methodDispose Clean up of resources.
(Inherited from GenericBase)
Protected methodDispose(Boolean) Method to perform the actual disposing of the device.
(Inherited from GenericDevice)
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Protected methodFinalize Destructor of the device.
(Inherited from GenericDevice)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Public methodLockFrontPanel Locks the front panel buttons. When locked the front panel buttons have no effect.
Protected methodMemberwiseCloneCreates a shallow copy of the current Object.
(Inherited from Object)
Public methodMuteAllRooms Mutes the audio to all rooms.
Protected methodOnBaseEvent(Int32) Protected member used to fire the BaseEvent with the default extended information.
(Inherited from GenericBase)
Protected methodOnBaseEvent(Int32, UInt16) Protected member used to fine the BaseEvent with extended event information.
(Inherited from GenericBase)
Public methodRegister Register this device with the system.
(Inherited from GenericDevice)
Public methodToString Return the name of the device.
(Inherited from GenericDevice)
Public methodUnlockFrontPanel Unlocks the front panel buttons.
Public methodUnmuteAllRooms Unmutes the audio to all rooms.
Public methodUnRegister Unregister this device with the system. This function can not be called from the device's own SigChange event handler.

On successful unregistration, if this device supports the OnlineStatusChange event, it will trigger indicating the device when offline.


(Inherited from GenericDevice)
Top
Events
 NameDescription
Public eventBaseEvent Generic base event, triggered when the there are no other handlers available for a specific EventID.
(Inherited from GenericBase)
Public eventIpInformationChange Event that tells what IP Address is connected/disconnected from an IP ID for a non-UDP device. This is only valid for an Ethernet device. An exception will be thrown if it is not.
(Inherited from GenericDevice)
Public eventOnlineStatusChange Event triggered when the Online status of the device changes.
(Inherited from GenericDevice)
Public eventRoomChangeEvent Event to handle any Changes on Room Feedbacks
Public eventSourceChangeEvent Event to handle any Changes on Source Feedbacks
Top
Fields
 NameDescription
Public fieldStatic memberAllRoomsOffFeedbackEventId Event ID to indicate that AllRoomsOffFeedback has changed.
Public fieldStatic memberAmpFaultFeedbackEventId Event ID to indicate that AmpFaultFeedback has changed.
Public fieldStatic memberBridgeRooms1And2OnFeedbackEventId Event ID to indicate that BridgeRooms1And2OnFeedback has changed.
Public fieldStatic memberBridgeRooms3And4OnFeedbackEventId Event ID to indicate that BridgeRooms3And4OnFeedback has changed.
Public fieldStatic memberBridgeRooms5And6OnFeedbackEventId Event ID to indicate that BridgeRooms5And6OnFeedback has changed.
Public fieldStatic memberFrontPanelLockedFeedbackEventId Event ID to indicate that FrontPanelLockedFeedback has changed.
Public fieldStatic memberFrontPanelSwitchOnFeedbackEventId Event ID to indicate that FrontPanelSwitchOnFeedback has changed.
Public fieldStatic memberMuteAllRoomsFeedbackEventId Event ID to indicate that MuteAllRoomsFeedback has changed.
Public fieldStatic memberTemperatureFaultFeedbackEventId Event ID to indicate that TemperatureFaultFeedback has changed.
Public fieldStatic memberTemperatureFeedbackEventId Event ID to indicate that TemperatureFeedback has changed.
Public fieldStatic memberTemperatureFormatFeedbackEventId Event ID to indicate that TemperatureFormatFeedback has changed.
Public fieldStatic memberTemperatureReportingEnableFeedbackEventId Event ID to indicate that TemperatureReportingEnableFeedback has changed.
Public fieldStatic memberVoltageFaultFeedbackEventId Event ID to indicate that VoltageFaultFeedback has changed.
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also