Click or drag to resize

HdXspAmplifiedOutput Properties

The HdXspAmplifiedOutput type exposes the following members.

Properties
 NameDescription
Public propertyBalance Sets the Balance between the left and right channels. Only supported for Downmix outputs.

Valid values range from -50% (Full Left) to +50% (Full Right). A value of 0% (Default) signifies an even balance between the left and right channels


(Inherited from HdXspOutput)
Public propertyBalanceFeedback Reports the Balance level between the left and right channels.

The StateChange event will trigger with BalanceFeedbackEventId.


(Inherited from HdXspOutput)
Public propertyBass Set the bass levels in decibels.

Valid values range from -120 (-12dB) to 120 (12dB) adjustable in increments of 0.1dB (1 = 0.1dB).


(Inherited from HdXspOutput)
Public propertyBassFeedback Reports the bass level. Valid values range from -120 (-12dB) to +120 (+12dB), where 1 = 0.1dB.

The StateChange event will trigger with BassFeedbackEventId.


(Inherited from HdXspOutput)
Public propertyEQ Sets the Equalization selection for this output.

This is only supported when Type is Main.


(Inherited from HdXspOutput)
Public propertyEQFeedback Reports the the Equalization selection of this output.

The StateChange event will trigger with EQFeedbackEventId.


(Inherited from HdXspOutput)
Public propertyLoudnessOnFeedback Reports if Loudness controls are turned on. 'true' = loudness controls are on; 'false' = loudness controls are off.

The StateChange event will trigger with LoudnessOnFeedbackEventId.


(Inherited from HdXspOutput)
Public propertyMaximumVolume Defines the maximum volume (the volume the output will be set to when the HD-XSP powers on) in percent. Valid values are from 70% to 100%.

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.


(Inherited from HdXspOutput)
Public propertyMaximumVolumeFeedback Reports the maximum volume in percent.

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.

The StateChange event will trigger with MaximumVolumeFeedbackEventId.


(Inherited from HdXspOutput)
Public propertyMinimumVolume Defines the minimum volume (the volume the output will be set to when the HD-XSP powers on) in percent. Valid values are from 0% to 50%.

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.


(Inherited from HdXspOutput)
Public propertyMinimumVolumeFeedback Reports the minimum volume in percent.

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.

The StateChange event will trigger with MinimumVolumeFeedbackEventId.


(Inherited from HdXspOutput)
Public propertyMuteOnFeedback Property to indicate if the output is muted.

'true' output is muted; 'false' output is not muted.

The StateChange event will trigger with MuteOnFeedbackEventId.


(Inherited from HdXspOutput)
Public propertyOutputMode Sets the output to be treated as Stereo or as Mono. This is only valid for Downmix outputs.
(Inherited from HdXspOutput)
Public propertyOutputModeFeedback Reports how the output is treated as. This only works for Downmix outputs.

The StateChange event will trigger with OutputModeFeedbackEventId.


(Inherited from HdXspOutput)
Public propertyParent The parent that a given object was added to.
(Inherited from HdXspOutput)
Public propertySpeakerProtectOnFeedback Indicates the status of speaker protection.

The output remains 'true' for as long as speaker protection is enabled.

When the output is 'false', this indicates that the feature is turned off.

The StateChange event will trigger with SpeakerProtectOnFeedbackEventId.

Public propertyStartupVolume Defines the startup volume (the volume the output will be set to when the HD-XSP powers on) in percent. Valid values are from 0% to 50%.

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.


(Inherited from HdXspOutput)
Public propertyStartupVolumeFeedback Reports the startup volume in percent.

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.

The StateChange event will trigger with StartupVolumeFeedbackEventId.


(Inherited from HdXspOutput)
Public propertyTreble Set the treble levels in decibels.

Valid values range from -120 (-12dB) to 120 (12dB) adjustable in increments of 0.1dB (1 = 0.1dB).


(Inherited from HdXspOutput)
Public propertyTrebleFeedback Reports the treble level. Valid values range from -120 (-12dB) to +120 (+12dB), where 1 = 0.1dB.

The StateChange event will trigger with TrebleFeedbackEventId.


(Inherited from HdXspOutput)
Public propertyTrimBackLeft Sets the gain of the back left speaker channel. The trim is adjustable within a range of -120 (-12dB) to 120 (+12dB) in increments of 0.1dB (1 = 0.1dB).
Public propertyTrimBackLeftFeedback Reports the trim value of the back left speaker channel

The StateChange event will trigger with TrimBackLeftFeedbackEventId.

Public propertyTrimBackRight Sets the gain of the back right speaker channel. The trim is adjustable within a range of -120 (-12dB) to 120 (+12dB) in increments of 0.1dB (1 = 0.1dB).
Public propertyTrimBackRightFeedback Reports the trim value of the back right speaker channel

The StateChange event will trigger with TrimBackRightFeedbackEventId.

Public propertyTrimCenter Sets the gain of the center speaker channel. The trim is adjustable within a range of -120 (-12dB) to 120 (+12dB) in increments of 0.1dB (1 = 0.1dB).
Public propertyTrimCenterFeedback Reports the trim value of the center speaker channel

The StateChange event will trigger with TrimCenterFeedbackEventId.

Public propertyTrimFrontLeft Sets the gain of the front left speaker channel. The trim is adjustable within a range of -120 (-12dB) to 120 (+12dB) in increments of 0.1dB (1 = 0.1dB).
Public propertyTrimFrontLeftFeedback Reports the trim value of the front left speaker channel.

The StateChange event will trigger with TrimFrontLeftFeedbackEventId.

Public propertyTrimFrontRight Sets the gain of the front right speaker channel. The trim is adjustable within a range of -120 (-12dB) to 120 (+12dB) in increments of 0.1dB (1 = 0.1dB).
Public propertyTrimFrontRightFeedback Reports the trim value of the front right speaker channel

The StateChange event will trigger with TrimFrontRightFeedbackEventId.

Public propertyTrimSubwoofer Sets the gain of the subwoofer channel. The trim is adjustable within a range of -120 (-12dB) to 120 (+12dB) in increments of 0.1dB (1 = 0.1dB).
Public propertyTrimSubwooferFeedback Reports the trim value of the subwoofer channel

The StateChange event will trigger with TrimSubwooferFeedbackEventId.

Public propertyTrimSurroundLeft Sets the gain of the surround left speaker channel. The trim is adjustable within a range of -120 (-12dB) to 120 (+12dB) in increments of 0.1dB (1 = 0.1dB).
Public propertyTrimSurroundLeftFeedback Reports the trim value of the surround left speaker channel

The StateChange event will trigger with TrimSurroundLeftFeedbackEventId.

Public propertyTrimSurroundRight Sets the gain of the surround right speaker channel. The trim is adjustable within a range of -120 (-12dB) to 120 (+12dB) in increments of 0.1dB (1 = 0.1dB).
Public propertyTrimSurroundRightFeedback Reports the trim value of the surround right speaker channel

The StateChange event will trigger with TrimSurroundRightFeedbackEventId.

Public propertyType Get the type of output this class represents.
(Inherited from HdXspOutput)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from HdXspOutput)
Public propertyVolume Property to adjust the volume level of this output.

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.


(Inherited from HdXspOutput)
Public propertyVolumeFeedback Property to report the current volume level of this output, in percent.

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.

The StateChange event will trigger with VolumeFeedbackEventId.


(Inherited from HdXspOutput)
Public propertyVolumeInDbFeedback Property to report the true volume level of this output, in decibels (1 = 0.1dB).

The StateChange event will trigger with VolumeInDbFeedbackEventId.


(Inherited from HdXspOutput)
Top
See Also