Hd |
This class will trigger the StateChange event.
public class HdXspAmplifiedOutput : HdXspOutput
The HdXspAmplifiedOutput type exposes the following members.
| Name | Description | |
|---|---|---|
| Balance |
Sets the Balance between the left and right channels. Only supported for Downmix outputs.
Valid values range from -50% (Full Left) to +50% (Full Right). A value of 0% (Default) signifies an even balance between the left and right channels (Inherited from HdXspOutput) | |
| BalanceFeedback |
Reports the Balance level between the left and right channels.
The StateChange event will trigger with BalanceFeedbackEventId. (Inherited from HdXspOutput) | |
| Bass |
Set the bass levels in decibels.
Valid values range from -120 (-12dB) to 120 (12dB) adjustable in increments of 0.1dB (1 = 0.1dB). (Inherited from HdXspOutput) | |
| BassFeedback |
Reports the bass level. Valid values range from -120 (-12dB) to +120 (+12dB), where 1 = 0.1dB.
The StateChange event will trigger with BassFeedbackEventId. (Inherited from HdXspOutput) | |
| EQ |
Sets the Equalization selection for this output.
This is only supported when Type is Main. (Inherited from HdXspOutput) | |
| EQFeedback |
Reports the the Equalization selection of this output.
The StateChange event will trigger with EQFeedbackEventId. (Inherited from HdXspOutput) | |
| LoudnessOnFeedback |
Reports if Loudness controls are turned on.
'true' = loudness controls are on; 'false' = loudness controls are off.
The StateChange event will trigger with LoudnessOnFeedbackEventId. (Inherited from HdXspOutput) | |
| MaximumVolume |
Defines the maximum volume (the volume the output will be set to when the HD-XSP powers on) in percent. Valid values are from 70% to 100%.
Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. (Inherited from HdXspOutput) | |
| MaximumVolumeFeedback |
Reports the maximum volume in percent.
Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. The StateChange event will trigger with MaximumVolumeFeedbackEventId. (Inherited from HdXspOutput) | |
| MinimumVolume |
Defines the minimum volume (the volume the output will be set to when the HD-XSP powers on) in percent. Valid values are from 0% to 50%.
Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. (Inherited from HdXspOutput) | |
| MinimumVolumeFeedback |
Reports the minimum volume in percent.
Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. The StateChange event will trigger with MinimumVolumeFeedbackEventId. (Inherited from HdXspOutput) | |
| MuteOnFeedback |
Property to indicate if the output is muted.
'true' output is muted; 'false' output is not muted. The StateChange event will trigger with MuteOnFeedbackEventId. (Inherited from HdXspOutput) | |
| OutputMode |
Sets the output to be treated as Stereo or as Mono. This is only valid for Downmix outputs.
(Inherited from HdXspOutput) | |
| OutputModeFeedback |
Reports how the output is treated as. This only works for Downmix outputs.
The StateChange event will trigger with OutputModeFeedbackEventId. (Inherited from HdXspOutput) | |
| Parent |
The parent that a given object was added to.
(Inherited from HdXspOutput) | |
| SpeakerProtectOnFeedback |
Indicates the status of speaker protection.
The output remains 'true' for as long as speaker protection is enabled. When the output is 'false', this indicates that the feature is turned off. The StateChange event will trigger with SpeakerProtectOnFeedbackEventId. | |
| StartupVolume |
Defines the startup volume (the volume the output will be set to when the HD-XSP powers on) in percent. Valid values are from 0% to 50%.
Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. (Inherited from HdXspOutput) | |
| StartupVolumeFeedback |
Reports the startup volume in percent.
Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. The StateChange event will trigger with StartupVolumeFeedbackEventId. (Inherited from HdXspOutput) | |
| Treble |
Set the treble levels in decibels.
Valid values range from -120 (-12dB) to 120 (12dB) adjustable in increments of 0.1dB (1 = 0.1dB). (Inherited from HdXspOutput) | |
| TrebleFeedback |
Reports the treble level. Valid values range from -120 (-12dB) to +120 (+12dB), where 1 = 0.1dB.
The StateChange event will trigger with TrebleFeedbackEventId. (Inherited from HdXspOutput) | |
| TrimBackLeft | Sets the gain of the back left speaker channel. The trim is adjustable within a range of -120 (-12dB) to 120 (+12dB) in increments of 0.1dB (1 = 0.1dB). | |
| TrimBackLeftFeedback |
Reports the trim value of the back left speaker channel
The StateChange event will trigger with TrimBackLeftFeedbackEventId. | |
| TrimBackRight | Sets the gain of the back right speaker channel. The trim is adjustable within a range of -120 (-12dB) to 120 (+12dB) in increments of 0.1dB (1 = 0.1dB). | |
| TrimBackRightFeedback |
Reports the trim value of the back right speaker channel
The StateChange event will trigger with TrimBackRightFeedbackEventId. | |
| TrimCenter | Sets the gain of the center speaker channel. The trim is adjustable within a range of -120 (-12dB) to 120 (+12dB) in increments of 0.1dB (1 = 0.1dB). | |
| TrimCenterFeedback |
Reports the trim value of the center speaker channel
The StateChange event will trigger with TrimCenterFeedbackEventId. | |
| TrimFrontLeft | Sets the gain of the front left speaker channel. The trim is adjustable within a range of -120 (-12dB) to 120 (+12dB) in increments of 0.1dB (1 = 0.1dB). | |
| TrimFrontLeftFeedback |
Reports the trim value of the front left speaker channel.
The StateChange event will trigger with TrimFrontLeftFeedbackEventId. | |
| TrimFrontRight | Sets the gain of the front right speaker channel. The trim is adjustable within a range of -120 (-12dB) to 120 (+12dB) in increments of 0.1dB (1 = 0.1dB). | |
| TrimFrontRightFeedback |
Reports the trim value of the front right speaker channel
The StateChange event will trigger with TrimFrontRightFeedbackEventId. | |
| TrimSubwoofer | Sets the gain of the subwoofer channel. The trim is adjustable within a range of -120 (-12dB) to 120 (+12dB) in increments of 0.1dB (1 = 0.1dB). | |
| TrimSubwooferFeedback |
Reports the trim value of the subwoofer channel
The StateChange event will trigger with TrimSubwooferFeedbackEventId. | |
| TrimSurroundLeft | Sets the gain of the surround left speaker channel. The trim is adjustable within a range of -120 (-12dB) to 120 (+12dB) in increments of 0.1dB (1 = 0.1dB). | |
| TrimSurroundLeftFeedback |
Reports the trim value of the surround left speaker channel
The StateChange event will trigger with TrimSurroundLeftFeedbackEventId. | |
| TrimSurroundRight | Sets the gain of the surround right speaker channel. The trim is adjustable within a range of -120 (-12dB) to 120 (+12dB) in increments of 0.1dB (1 = 0.1dB). | |
| TrimSurroundRightFeedback |
Reports the trim value of the surround right speaker channel
The StateChange event will trigger with TrimSurroundRightFeedbackEventId. | |
| Type |
Get the type of output this class represents.
(Inherited from HdXspOutput) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from HdXspOutput) | |
| Volume |
Property to adjust the volume level of this output.
Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. (Inherited from HdXspOutput) | |
| VolumeFeedback |
Property to report the current volume level of this output, in percent.
Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. The StateChange event will trigger with VolumeFeedbackEventId. (Inherited from HdXspOutput) | |
| VolumeInDbFeedback |
Property to report the true volume level of this output, in decibels (1 = 0.1dB).
The StateChange event will trigger with VolumeInDbFeedbackEventId. (Inherited from HdXspOutput) |
| Name | Description | |
|---|---|---|
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| LoudnessOff |
Turns off loudness function.
(Inherited from HdXspOutput) | |
| LoudnessOn |
Turns on loudness function.
(Inherited from HdXspOutput) | |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) | |
| MuteOff |
Un-mute this output.
(Inherited from HdXspOutput) | |
| MuteOn |
Mute this output.
(Inherited from HdXspOutput) | |
| SpeakerProtectOff | Turns off speaker protection. | |
| SpeakerProtectOn | Turns on speaker protection. Speaker protection limits the zone output level based on the speaker wattage and impedance, to prevent speaker damage. | |
| ToString |
Return a string representing this HdXspOutput.
(Inherited from HdXspOutput) | |
| Trim | Method to set the trim of the specified output channel. |
| Name | Description | |
|---|---|---|
| StateChange |
Event triggered when a change is detected from the HD-XSP output this object represents.
Valid event IDs are available in HdXspOutputEventIds (Inherited from HdXspOutput) |