Click or drag to resize

DmfXx4kSfpControl Properties

The DmfXx4kSfpControl type exposes the following members.

Properties
 NameDescription
Public propertyAudioMutedFeedback Property to indicate that the audio is muted. 'true' = audio muted; 'false' = audio not muted.

The BaseEvent event will trigger with AudioMuteEventId.


(Inherited from DmRmc100StrControl)
Public propertyAudioSource Property to select the audio source. This property will return the last value which was sent to the device and not what we got from the device.
Public propertyAudioSourceFeedback Property to report the active audio source.

The BaseEvent event will trigger with AudioSourceEventId.

Public propertyAudioUnmutedFeedback Property to indicate that the audio is unmuted. 'true' = audio unmuted; 'false' = audio not unmuted.

The BaseEvent event will trigger with AudioUnmuteEventId.


(Inherited from DmRmc100StrControl)
Public propertyCard Get the card that this DmcStrControl is apart of.

This property will trigger DMOutputChange with DMOutputEventIds for Dmco70/Dmco73/Dmco74/Dmco75/Dmco76/Dmco77 and DmcStroSingle objects.

This property will trigger DMInputChange with DMOutputEventIds for DmcStr/DmcStrCresnet and "DmTxRx100Str" objects.


(Inherited from DmcStrControl)
Public propertyDecoderReadyFeedback Property to indicate that the Decoder is ready. Not supported by "DmTxRx100Str". 'true = Decoder ready; 'false' = Decoder not ready.

The DMInputChange event will trigger with DecoderReadyEventId when DmcStr is connected to a Switch.

The BaseEvent event will trigger with DecoderReadyEventId for DMCI Version of DmcStr or DmcStrCresnet.


(Inherited from DmcStriControl)
Public propertyDisableAutomaticInitiationFeedback Property to indicate the automatic initiation disabled status. 'true = Automatic Initiation disabled; 'false' = Automatic Initiation enabled. This property is not supported by DMF-XX-4K-SFP device.

The BaseEvent event will trigger with AutomaticInitiationDisabledEventId.


(Inherited from DmRmc100StrControl)
Public propertyDisableAutomaticInputRoutingFeedback Property to indicate the automatic input routing disabled status. 'true = Automatic Input Routing disabled; 'false' = Automatic Input Routing enabled. This property is not supported by DMF-XX-4K-SFP,"DmNvxD30","DmNvxD30C","DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices.

The BaseEvent event will trigger with AutomaticInputRoutingDisabledEventId.

Public propertyDisableLedsFeedback Property to indicate the LEDs disabled status. 'true' = LEDs enabled; 'false' = LEDs disabled. This property is not supported by DMF-XX-4K-SFP, "DmNvxD80Ioav" devices.

The BaseEvent event will trigger with LedsDisabledEventId.


(Inherited from DmRmc100StrControl)
Public propertyElapsedSecFeedbackObsolete.
Indicates the time elapsed (in seconds) since streaming was started.
(Inherited from DmcStrControl)
Public propertyElapsedSecondsFeedback Indicates the time elapsed (in seconds) since streaming was started.

The BaseEvent event will trigger with ElapsedSecEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str".

The DMInputChange event will trigger with ElapsedSecEventId for DmcStr when the card is connected to a Switch.

The DMOutputChange event will trigger with ElapsedSecEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch.

This property is no longer supported by "DmNvx350", "DmNvx351", "DmNvx350C" and "DmNvx351C" from the device firmware version 1.3626.00020 onwards.
(Inherited from DmcStrControl)
Public propertyEnableAutomaticInitiationFeedback Property to indicate the automatic initiation enabled status. 'true' = Automatic Initiation enabled; 'false' = Automatic Initiation disabled. This property is not supported by DMF-XX-4K-SFP device.

The BaseEvent event will trigger with AutomaticInitiationEnabledEventId.


(Inherited from DmRmc100StrControl)
Public propertyEnableAutomaticInputRoutingFeedback Property to indicate the automatic input routing enabled status. 'true' = Automatic Input Routing enabled; 'false' = Automatic Input Routing disabled. This property is not supported by DMF-XX-4K-SFP,"DmNvxD30","DmNvxD30C","DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices.

The BaseEvent event will trigger with AutomaticInputRoutingEnabledEventId.

Public propertyEnableLedsFeedback Property to indicate the LEDs enabled status. This property is not supported by DMF-XX-4K-SFP, "DmNvxD80Ioav" devices. 'true' = LEDs enabled; 'false' = LEDs disabled.

The BaseEvent event will trigger with LedsEnabledEventId.


(Inherited from DmRmc100StrControl)
Public propertyInitiatorAddressFeedback Property to return the Initiator Address.

The DMInputChange event will trigger with InitiatorAddressEventId when DmcStr is connected to a Switch.

The BaseEvent event will trigger with InitiatorAddressEventId for DMCI Version of DmcStr or DmcStrCresnet or "DmTxRx100Str".


(Inherited from DmcStriControl)
Public propertyInputOutput The Input/Output card that this DmcStrControl is a part of.
(Inherited from DmcStrControl)
Public propertyMulticastAddress Specifies the multicast address to which the card will try to stream if SessionInitiation = MulticastViaRTSP. This property is not supported by "DmNvxE30", "DmNvxE30C", "DmNvxE31" and "DmNvxE31C" devices.
(Inherited from DmcStrControl)
Public propertyMulticastAddressFeedback Indicates the multicast address to which the card is streaming if SessionInitiation = MulticastViaRTSP.

The BaseEvent event will trigger with MulticastAddressEventId for DMCI Version of DmcStr, for DmcStrCresnet, for "DmTxRx100Str", or for "DmNvxBaseClass".

The DMInputChange event will trigger with MulticastAddressEventId for DmcStr when the card is connected to a Switch.

The DMOutputChange event will trigger with MulticastAddressEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch.


(Inherited from DmcStrControl)
Public propertyName Property to set the name of the detected midpoint for DmfXx4kSfp. Property to set the name of the device to be used to name the device in the chassis, web interface, and stream subscriptions for "DmNvx350", "DmNvx351", "DmNvx352", "DmNvx350C", "DmNvx351C" or "DmNvx352C". This property is same as "DeviceName" join in SIMPL Windows for "DmNvx350", "DmNvx351", "DmNvx350C" or "DmNvx351C".
Public propertyNameFeedback Property to return the name of the detected midpoint for DmfXx4kSfp. Property to return the name of the device that is used to name the device in the chassis, web interface, and stream subscriptions for "DmNvx350", "DmNvx351", "DmNvx352", "DmNvx350C", "DmNvx351C" or "DmNvx352C". This property is same as "DeviceNameFeedback" join in SIMPL Windows for "DmNvx350", "DmNvx351", "DmNvx350C" or "DmNvx351C".

The BaseEvent event will trigger with NameFeedbackEventId.

Public propertyOnlineFeedback Indicates whether the card is online or offline; that is, whether it is running properly (responding to polls) on the internal network. The output will remain 'true' for as long as the card is online. 'true = Card online (running); 'false' = Card offline (not running) This property is applicable only when the DM Card is connected to a Switch.

The DMInputChange event will trigger with OnlineFeedbackEventId.


(Inherited from DmcStriControl)
Public propertyParent The parent that a given object was added to.
(Inherited from DmcStrControl)
Public propertyParent2 Set to the second parent if a given object has more than one parent.
(Inherited from DmcStrControl)
Public propertyPassword Sets the password for the stream. The password can consist of up to 200 characters.
(Inherited from DmcStrControl)
Public propertyPasswordFeedback Text string that reports the password used for the stream.

The BaseEvent event will trigger with PasswordEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str".

The DMInputChange event will trigger with PasswordEventId for DmcStr when the card is connected to a Switch.

The DMOutputChange event will trigger with PasswordEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch.


(Inherited from DmcStrControl)
Public propertyPauseFeedback Indicates that the stream is paused. The output remains 'true' for as long as the stream is paused. This property is not supported by "DmNvxD30", "DmNvxD30C", "DmNvx350", "DmNvx350C", "DmNvx351", "DmNvx351C", "DmNvxD30", "DmNvxD30C", "DmNvxE30", "DmNvxE30C", "DmNvxE31" and "DmNvxE31C" devices.

The BaseEvent event will trigger with PauseEventId for "DmTxRx100Str" and for DMCI version of DmcStr.

The DMInputChange event will trigger with PauseEventId for DmcStr when the card is connected to a Switch.

The DMOutputChange event will trigger with PauseEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch.


(Inherited from DmcStrControl)
Public propertyPresentFeedback Indicates whether the card is physically plugged into the card slot on the Switch. The output will remain 'true' for as long as the card is detected. 'true = Card present; 'false' = Card not installed. This property is applicable only when the DM Card is connected to a Switcher.

The DMInputChange event will trigger with PresentFeedbackEventId.


(Inherited from DmcStriControl)
Public propertyProcessingFeedback Property to indicate the processing status. 'true = Processing in progress; 'false' = Processing not in progress.

The DMInputChange event will trigger with ProcessingEventId when DmcStr is connected to a Switch.

The BaseEvent event will trigger with ProcessingEventId for DMCI Version of DmcStr, or DmcStrCresnet, or "DmTxRx100Str".


(Inherited from DmcStriControl)
Public propertyRebootRequiredFeedback Property to indicate the reboot required status of the device. This property is not supported by DMF-XX-4K-SFP,"DmNvxD30","DmNvxD30C","DmNvxE30","DmNvxE30C","DmNvxE31", "DmNvxE31C", "DmNvxD10", "DmNvxD20", "DmNvxE10", "DmNvxE20" and "DmNvxD200" devices.

The BaseEvent event will trigger with RebootRequiredEventId.


(Inherited from DmRmc100StrControl)
Public propertyRemoteEndDetectedFeedback Property to indicate if the remote end is detected.

The BaseEvent event will trigger with RemoteEndDetectedEventId.

Public propertyServerUrl Property to set the Server URL. Setting this property will set the StreamLocation property of the "DmNvxBaseClass". This property is not supported by "DmNvxE30" and "DmNvxE30C" devices.
(Inherited from DmcStriControl)
Public propertyServerUrlFeedback Property to return the current Server URL. Reading this property returns the StreamLocation property of the "DmNvxBaseClass".

The DMInputChange event will trigger with ServerUrlEventId when DmcStr is connected to a Switch.

The BaseEvent event will trigger with ServerUrlEventId for DMCI Version of DmcStr or DmcStrCresnet or "DmTxRx100Str".


(Inherited from DmcStriControl)
Public propertySessionInitiation Specifies the session initiation status
(Inherited from DmcStrControl)
Public propertySessionInitiationFeedback Reports the current session initiation status

The BaseEvent event will trigger with SessionInitiationEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str".

The DMInputChange event will trigger with SessionInitiationEventId for DmcStr when the card is connected to a Switch.

The DMOutputChange event will trigger with SessionInitiationEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch.


(Inherited from DmcStrControl)
Public propertyStartFeedback Indicates if streaming has started. 'true' = Streaming started; 'false' = Streaming has not started.

The BaseEvent event will trigger with StartEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str".Switch.

The DMInputChange event will trigger with StartEventId when DmcStr card is connected to a Switch.

The DMOutputChange event will trigger with StartEventId when Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle cards are connected to a Switch.


(Inherited from DmcStrControl)
Public propertyStatusFeedback Property to report the streaming status.

The DMInputChange event will trigger with StatusEventId when DmcStr is connected to a Switch.

The BaseEvent event will trigger with StatusEventId for DMCI Version of DmcStr or DmcStrCresnet or "DmTxRx100Str".


(Inherited from DmcStriControl)
Public propertyStatusTextFeedback Property to return the status text.

The DMInputChange event will trigger with StatusTextEventId when DmcStr is connected to a Switch.

The BaseEvent event will trigger with StatusTextEventId for DMCI Version of DmcStr or DmcStrCresnet or "DmTxRx100Str".


(Inherited from DmcStriControl)
Public propertyStopFeedback Indicates the stream status. 'true' = Stream stopped; 'false' = Stream not stopped.

The BaseEvent event will trigger with StopEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str".

The DMInputChange event will trigger with StopEventId when DmcStr card is connected to a Switch.

The DMOutputChange event will trigger with StopEventId when Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle cards are connected to a Switch.


(Inherited from DmcStrControl)
Public propertyStreamBitrateFeedback Reports the current stream bitrate.

The BaseEvent event will trigger with StreamBitrateEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str".

The DMInputChange event will trigger with StreamBitrateEventId for DmcStr when the card is connected to a Switch.

The DMOutputChange event will trigger with StreamBitrateEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch.


(Inherited from DmcStrControl)
Public propertyStreamingBuffer Property to set the amount of Video to be cached in milliseconds. Valid values are from 0 to 2500.
(Inherited from DmcStriControl)
Public propertyStreamingBufferFeedback Property to report the amount of Video cached in milliseconds.

The DMInputChange event will trigger with StreamingBufferEventId when DmcStr is connected to a Switch.

The BaseEvent event will trigger with StreamingBufferEventId for DMCI Version of DmcStr or DmcStrCresnet or "DmTxRx100Str".


(Inherited from DmcStriControl)
Public propertyStreamingTransportMode Property to set the Streaming Transport Mode. Valid values are 0-RTP and 1-MPEG2TS.
(Inherited from DmcStriControl)
Public propertyStreamingTransportModeFeedback Property to report the current Streaming Transport Mode.

The DMInputChange event will trigger with StreamingTransportModeEventId when DmcStr is connected to a Switch.

The BaseEvent event will trigger with StreamingTransportModeEventId for DMCI Version of DmcStr or DmcStrCresnet or "DmTxRx100Str".


(Inherited from DmcStriControl)
Public propertyStreamProfileFeedback Reports the currently selected profile.

The BaseEvent event will trigger with StreamProfileEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str".

The DMInputChange event will trigger with StreamProfileEventId for DmcStr when the card is connected to a Switch.

The DMOutputChange event will trigger with StreamProfileEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch.


(Inherited from DmcStrControl)
Public propertyType Get the eDmStreamTypeDmcStrControl object represents.
(Inherited from DmcStrControl)
Public propertyUserName Specifies the user name for the stream. The user name can consist of up to 200 characters.
(Inherited from DmcStrControl)
Public propertyUserNameFeedback Text string that reports the user name used for the stream.

The BaseEvent event will trigger with UserNameEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str".

The DMInputChange event will trigger with UserNameEventId for DmcStr when the card is connected to a Switch.

The DMOutputChange event will trigger with UserNameEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch.


(Inherited from DmcStrControl)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from DmcStrControl)
Public propertyVideoSource Property to select the video source for the encoder / HDMI output. This property will return the last value which was sent to the device and not what we got from the device. This method is not supported by DMF-XX-4K-SFP,"DmNvxD30","DmNvxD30C","DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices.
Public propertyVideoSourceFeedback Property to report the active video source for DmfXx4kSfp. Property to report the currently selected video source for "DmNvx350", "DmNvx351", "DmNvx350C" and "DmNvx351C". This property is not supported by DMF-XX-4K-SFP,"DmNvxD30","DmNvxD30C","DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices.

The BaseEvent event will trigger with VideoSourceEventId.

Top
See Also