Din |
The DinDliBase type exposes the following members.
| Name | Description | |
|---|---|---|
| ApplyCctOperatingMode | Method to start using the CCT operating mode. | |
| BroadcastOff | Method to turn off all the drivers on the DinDliBase. | |
| DisableDynamicFadeTimes | Method to disable the use of Dynamic Fade Times. | |
| DisableExtendedFadeTimes | Method to disable the use of Extended Fade Times. | |
| Dispose |
Clean up of resources.
(Inherited from GenericBase) | |
| Dispose(Boolean) |
Method to perform the actual disposing of the device.
(Inherited from GenericDevice) | |
| EnableDynamicFadeTimes | Method to enable the use of Dynamic Fade Times. | |
| EnableExtendedFadeTimes | Method to enable the use of Extended Fade Times. | |
| EnterManualOverride | Method to enter manual override mode. This recalls the override load levels stored in the DliDriver. | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Execute(Byte, Byte) | Method to send the 2-byte DALI control/query command or special command specified by "paramAddress" (byte 1) and "paramCommandOrData" (byte 2). The commands can be sent to individual DliDriver/DliGroup/ all drivers that are part of the DinDliBase. | |
| Execute(Byte, Byte, Byte) | Method to send the 3-byte DALI command. The DALI command consists of "paramAddress" (byte 1), "paramCommandOrData" (byte 2) and "paramData" (byte 3). | |
| ExitManualOverride | Method to exit manual override mode. This will restore the loads to the non-override states (assuming not also in External override mode). | |
| Finalize |
Destructor of the device.
(Inherited from GenericDevice) | |
| GetDriverExtendedType | Method to force the ExtendedTypeFeedback properties to refresh. | |
| GetDriverGTIN | Method to force updating all the GTINFeedback properties of this DliDriver | |
| GetDriverTcRangeCoolest | Method to force updating all the TcRangeCoolestFeedback properties of this DliDriver | |
| GetDriverTcRangeWarmest | Method to force updating all the TcRangeWarmestFeedback properties of this DliDriver | |
| GetDriverType | Method to force the TypeFeedback properties to refresh. | |
| GetGroupCapabilty | Method to force updating all the CapabilityFeedback properties of this DliGroup | |
| GetGroupTcRangeCoolest | Method to force updating all the TcRangeCoolestFeedback properties of this DliGroup | |
| GetGroupTcRangeWarmest | Method to force updating all the TcRangeWarmestFeedback properties of this DliGroup | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) | |
| OnBaseEvent(Int32) |
Protected member used to fire the BaseEvent with the default extended information.
(Inherited from GenericBase) | |
| OnBaseEvent(Int32, UInt16) |
Protected member used to fine the BaseEvent with extended event information.
(Inherited from GenericBase) | |
| ProgramCctSceneApproximationValues | Method to program the CCT scene approximation values. | |
| Register |
Register this device with the system.
(Inherited from GenericDevice) | |
| ToString |
Return the name of the device.
(Inherited from GenericDevice) | |
| UnRegister |
Unregister this device with the system. This function can not be called from the device's own SigChange event handler.
On successful unregistration, if this device supports the OnlineStatusChange event, it will trigger indicating the device when offline. (Inherited from GenericDevice) |