Swamp |
The Swamp24x8 type exposes the following members.
| Name | Description | |
|---|---|---|
| AllZonesDoorbellAudioOnFeedback |
Indicates that the doorbell source is selected for all doorbell enabled zones as long as the property is true. A false indicates
that normal source is selected for all doorbell enabled zones
The BaseEvent event will trigger with AllZonesDoorbellAudioOnFeedbackEventId. (Inherited from Swamp) | |
| AllZonesDoorbellSource |
Property to set the source used when doorbell audio is enabled. Valid ranges are 0 (Disabled) to 24.
This is supported in device firmware versions 4.002.278600000 and higher.
(Inherited from Swamp) | |
| AllZonesDoorbellSourceSelectedFeedback |
Property to indicate the source used when doorbell audio is enabled.
The BaseEvent event will trigger with AllZonesDoorbellAudioSourceEventId. This is supported in device firmware versions 4.002.278600000 and higher.(Inherited from Swamp) | |
| AllZonesOffFeedback |
Indicates that all zones are off. The output is true for as long as all zones are turned off.
The BaseEvent event will trigger with AllZonesOffFeedbackEventId. (Inherited from Swamp) | |
| ConnectedIpList |
A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID.
This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null.
If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected.
The order of items in this list is not guaranteed.
(Inherited from GenericDevice) | |
| Description |
Get/Set the description of this device.
(Inherited from GenericBase) | |
| Disposed |
Property to indicate if the device has been disposed.
(Inherited from GenericDevice) | |
| Expanders |
Collection of Expanders for this Swamp Processor.
(Inherited from Swamp) | |
| ExpanderTypeFeedback |
Collection of the eExpanderTypes which are plugged into the unit.
The BaseEvent event will trigger with ExpanderTypeFeedbackEventId with Index is set to Number. (Inherited from Swamp) | |
| ExtenderDeviceReadyReservedCues |
Property to access the Device Ready functionality of the Swamp.
This property will trigger DeviceExtenderSigChange event. (Inherited from Swamp) | |
| FrontPanelLockedFeedback |
Indicates the lock status of the front panel.
The output is true for as long as the buttons are locked out;
when false, this indicates that the front panel is not locked.
The BaseEvent event will trigger with FrontPanelLockedFeedbackEventId. (Inherited from Swamp) | |
| FrontPanelSwitchOnFeedback |
Indicates that the amplifier is turned on (front panel power switch is set to the On position).
The BaseEvent event will trigger with FrontPanelSwitchOnFeedbackEventId. (Inherited from Swamp) | |
| ID |
Property to get the ID of the device.
(Inherited from GenericDevice) | |
| IsOnline |
Property to get the current online state of the device.
(Inherited from GenericDevice) | |
| MuteAllZonesFeedback |
Indicates the mute state of all zones from the Swamp and connected Expanders that have sources routed.
When true, all zones with sources routed are muted.
When false, at least one of the zones with routed sources is not muted, or all zones are off.
The BaseEvent event will trigger with MuteAllZonesFeedbackEventId. (Inherited from Swamp) | |
| Name |
Get the name of this device.
(Inherited from GenericBase) | |
| NumberOfExpanders |
The maximum number of Expanders allowed on this Swamp.
(Inherited from Swamp) | |
| NumberOfInputSources |
The maximum number of Input Sources allowed on this Swamp.
(Inherited from Swamp) | |
| NumberOfOutputZones |
The maximum number of Output AmplifiedZones allowed on this Swamp.
(Inherited from Swamp) | |
| NumberOfSpdifOutputs |
The maximum number of Spdif Outputs allowed on this Swamp.
(Inherited from Swamp) | |
| Parent |
The parent that a given object was added to.
(Inherited from GenericBase) | |
| Registerable |
Property to indicate that this device can be registered.
(Inherited from GenericDevice) | |
| Registered |
Property to get the current registration state of the device.
(Inherited from GenericDevice) | |
| RegistrationFailureReason |
Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice) | |
| SignalPresent |
Indicates whether a signal is present at the input specified by SignalPresentSource.
The BaseEvent event will trigger with SignalPresentEventId. (Inherited from Swamp) | |
| SignalPresentSource |
Selects the input number that will be monitored by the SignalPresent Output.
Valid values:
0 = Disable monitoring,
1 through 16 = Analog 1 through Analog 16,
17 through 24 = SPDIF 17 through SPDIF 24
(Inherited from Swamp) | |
| SignalPresentSourceFeedback |
Reports the input number being monitored by the SignalPresentSource.
The BaseEvent event will trigger with SignalPresentSourceFeedbackEventId. (Inherited from Swamp) | |
| SIMPLDeviceImplementation |
Internal protected member used for actual device control.
(Inherited from GenericDevice) | |
| Sources |
Collection of Source properties for this Swamp Processor.
(Inherited from Swamp) | |
| SpdifOuts |
Collection of Spdifs for this Swamp Processor.
(Inherited from Swamp) | |
| TemperatureFeedback |
When temperature reporting is enabled, this output reports the internal amplifier temperature.
The BaseEvent event will trigger with TemperatureFeedbackEventId. (Inherited from Swamp) | |
| TemperatureFormat |
Sets the format for internal amp temperature reporting. When false, the format is set to Fahrenheit; when true, Celsius.
(Inherited from Swamp) | |
| TemperatureFormatFeedback |
Indicates the temperature format. The output is true for as long as the format is set to Celsius.
When the output is false, this indicates that the format is set to Fahrenheit.
The BaseEvent event will trigger with TemperatureFormatFeedbackEventId. (Inherited from Swamp) | |
| TemperatureHighFeedback |
Indicates a temperature fault in the amp.
The BaseEvent event will trigger with TemperatureHighFeedbackEventId. (Inherited from Swamp) | |
| TemperatureReportingEnabledFeedback |
Indicates the status of temperature reporting. The output is true for as long as temperature reporting is enabled;
when false, this indicates that temperature reporting is disabled.
The BaseEvent event will trigger with TemperatureReportingEnabledFeedbackEventId. (Inherited from Swamp) | |
| Type |
Property to determine to type of device this is.
(Inherited from GenericDevice) | |
| UnRegistrationFailureReason |
Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from GenericBase) | |
| XioEndpointStubSIMPLDevice |
The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the
correct place in hierarchy.
(Inherited from GenericDevice) | |
| Zones |
Collection of AmplifiedZones for this Swamp Processor.
(Inherited from Swamp) |