Click or drag to resize

Dmps3AttachableOutputMixer Properties

The CrestronControlSystemDmps3AttachableOutputMixer type exposes the following members.

Properties
 NameDescription
Public propertyAudioOutSourceFeedback Reports the currently selected mixer audio output source.

The DMOutputChange event will trigger with DigitalMixerAudioSourceFeedBackEventId.

Public propertyDelay Sets the delay level. Valid values range from 0 (0ms) to 850 (85ms). Delay is supported on mixers that are on CardDmps3ProgramOutput and CardDmps3AuxOutput outputs.
Public propertyDelayFeedback Reports the current delay level. Valid values range from 0 (0ms) to 850 (85ms). Delay feedback is supported on mixers that are on CardDmps3ProgramOutput and CardDmps3AuxOutput outputs.
Public propertyMasterMuteOffFeedBack Property that returns true when the Master is not muted on this output, false otherwise.
Public propertyMasterMuteOnFeedBack Property that returns true when the Master is muted on this output, false otherwise.
Public propertyMasterVolume Specifies the gain level for the Master volume on this output stream. Valid values range from -800 (-80dB) to 100 (10dB).
Public propertyMasterVolumeDown Decreases the master volume on this output while the property is true. Setting it to false will stop the decrease.
Public propertyMasterVolumeFeedBack Indicates the gain level for the Master volume on this output stream. Valid values range from -800 (-80dB) to 100 (10dB).
Public propertyMasterVolumeUp Increases the master volume on this output while the property is true. Setting it to false will stop the increase.
Public propertyMaxVolume Specifies the maximum volume gain, in tenths of a dB. The MinVolume and MaxVolume properties allow endpoints to be set for volume control. Typically, this property would not be used since the minimum volume can be set through the Front Panel Setup Menus or using the DM Tool in Toolbox. Valid values range from -300 (-30dB) to 100 (10dB).
Public propertyMaxVolumeFeedback Reports the current maximum volume gain, in tenths of a dB. Valid values range from -300 (-30dB) to 100 (10dB).
Public propertyMicLevel Property to set the value of the level for a given microphone on this output.
Public propertyMicLevelFeedback Property to read the feedback level for a given microphone on this output.
Public propertyMicMasterLevel Specifies the gain level for the Mic Master volume on this output. Valid values range from -800 (-80dB) to 100 (10dB).
Public propertyMicMasterLevelDown Decreases the Mic master volume on this output while the property is true. Setting it to false will stop the decrease.
Public propertyMicMasterLevelFeedBack Indicates the gain level for the Mic Master volume on this output. Valid values range from -800 (-80dB) to 100 (10dB).
Public propertyMicMasterLevelUp Increases the Mic master volume on this output while the property is true. Setting it to false will stop the increase.
Public propertyMicMasterMuteOffFeedback Property that returns true when the Mic Master is not muted on this output, false otherwise.
Public propertyMicMasterMuteOnFeedback Property that returns true when the Mic Master is muted on this output, false otherwise.
Public propertyMicMuteOffFeedback Property to return the state of the MicMuteOffFeedback for a given microphone on this output
Public propertyMicMuteOnFeedback Property to return the state of the MicMuteOnFeedback for a given microphone on this output.
Public propertyMicPan Property to set the value of the pan for a given microphone on this output. Valid values range from -32768 to 32768.
Public propertyMicPanFeedback Property to read the pan level for a given microphone on this output. Valid values range from -32768 to 32768.
Public propertyMinVolume Specifies the minimum volume gain, in tenths of a dB. The MinVolume and MaxVolume properties allow endpoints to be set for volume control. Typically, this property would not be used since the minimum volume can be set through the Front Panel Setup Menus or using the DM Tool in Toolbox. Valid values range from -800 (-80dB) to -400 (-40dB).
Public propertyMinVolumeFeedback Reports the current minimum volume gain, in tenths of a dB. Valid values range from -800 (-80dB) to -400 (-40dB).
Public propertyMixerBypassedFeedback Indicates that the routed audio input is in mixer bypass mode. Mixer bypass mode allows advanced audio to pass through the HDMI switch. The DMPS3 mixers only support stereo PCM. On digital outputs, this means that the audio is routed directly from the audio source without passing through the mixer. The microphone mix and audio controls are not available. On analog outputs the selected source audio will be muted. Mixer bypass mode is only controllable via the DMPS Tool.
Public propertyOutputMixerType The type of Output Mixer available. See the definition of IOutputMixer interface for more information.
(Inherited from OutputMixerBase)
Public propertyOutputNumber Reports the output number of this mixer
Public propertyOutputVuFeedback Reports the VU meter feedback value, when VU feedback is enabled. Reported values will range from 0 to 8.
Public propertyParent The parent that a given object was added to.
(Inherited from OutputMixerBase)
Public propertyPresetNumber Specifies the mixer preset number that will save or recall the mixing. Valid values range from 1 to 5.
Public propertyPresetReadyPulseFeedback Pulses to indicate that the system has finished recalling a preset.

The DMOutputChange event will trigger with MixerPresetReadyPulseFeedbackEventId.

Public propertyRecallingPresetFeedback When true, indicates that the system is in the process of recalling mixer preset.

The DMOutputChange event will trigger with RecallingMixerPresetFeedbackEventId.

Public propertySourceBalance Specifies the source balance between the left and right channels on this output stream. Valid values range from -50% (full left) to 50% (full right). Use "SimplSharpDeviceHelper.PercentToUshort" to convert the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert the ushort value to percentage.
Public propertySourceBalanceFeedBack Indicates the source balance between the left and right channels on this output stream. Valid values range from -50% (full left) to 50% (full right). Use "SimplSharpDeviceHelper.PercentToUshort" to convert the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert the ushort value to percentage.
Public propertySourceLevel Specifies the gain level for the Source volume on this output stream. Valid values range from -800 (-80dB) to 100 (10dB).
Public propertySourceLevelDown Decreases the source volume on this output while the property is true. Setting it to false will stop the decrease.
Public propertySourceLevelFeedBack Indicates the gain level for the Source volume on this output stream. Valid values range from -800 (-80dB) to 100 (10dB).
Public propertySourceLevelUp Increases the source volume on this output while the property is true. Setting it to false will stop the increase
Public propertySourceMuteOffFeedBack Property that returns true when the Source is not muted on this output, false otherwise.

The DMOutputChange event will trigger with SourceMuteOffFeedBackEventId.

Public propertySourceMuteOnFeedBack Property that returns true when the Source is muted on this output, false otherwise.

The DMOutputChange event will trigger with SourceMuteOnFeedBackEventId.

Public propertyStartupVolume Specifies the startup volume in tenths of a dB. The startup volume is the volume level that will be set when the system is turned on. Valid values range from -800 (-80dB) to 100 (10dB).
Public propertyStartupVolumeFeedback Reports the current startup volume in tenths of a dB. Valid values range from -800 (-80dB) to 100 (10dB).
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from OutputMixerBase)
Top
See Also