Crestron |
public class Dmps3AttachableOutputMixer : OutputMixerBase, IDmps3OutputMixer
The CrestronControlSystemDmps3AttachableOutputMixer type exposes the following members.
| Name | Description | |
|---|---|---|
| AudioOutSourceFeedback |
Reports the currently selected mixer audio output source.
The DMOutputChange event will trigger with DigitalMixerAudioSourceFeedBackEventId. | |
| Delay | Sets the delay level. Valid values range from 0 (0ms) to 850 (85ms). Delay is supported on mixers that are on CardDmps3ProgramOutput and CardDmps3AuxOutput outputs. | |
| DelayFeedback | Reports the current delay level. Valid values range from 0 (0ms) to 850 (85ms). Delay feedback is supported on mixers that are on CardDmps3ProgramOutput and CardDmps3AuxOutput outputs. | |
| MasterMuteOffFeedBack | Property that returns true when the Master is not muted on this output, false otherwise. | |
| MasterMuteOnFeedBack | Property that returns true when the Master is muted on this output, false otherwise. | |
| MasterVolume | Specifies the gain level for the Master volume on this output stream. Valid values range from -800 (-80dB) to 100 (10dB). | |
| MasterVolumeDown | Decreases the master volume on this output while the property is true. Setting it to false will stop the decrease. | |
| MasterVolumeFeedBack | Indicates the gain level for the Master volume on this output stream. Valid values range from -800 (-80dB) to 100 (10dB). | |
| MasterVolumeUp | Increases the master volume on this output while the property is true. Setting it to false will stop the increase. | |
| MaxVolume | Specifies the maximum volume gain, in tenths of a dB. The MinVolume and MaxVolume properties allow endpoints to be set for volume control. Typically, this property would not be used since the minimum volume can be set through the Front Panel Setup Menus or using the DM Tool in Toolbox. Valid values range from -300 (-30dB) to 100 (10dB). | |
| MaxVolumeFeedback | Reports the current maximum volume gain, in tenths of a dB. Valid values range from -300 (-30dB) to 100 (10dB). | |
| MicLevel | Property to set the value of the level for a given microphone on this output. | |
| MicLevelFeedback | Property to read the feedback level for a given microphone on this output. | |
| MicMasterLevel | Specifies the gain level for the Mic Master volume on this output. Valid values range from -800 (-80dB) to 100 (10dB). | |
| MicMasterLevelDown | Decreases the Mic master volume on this output while the property is true. Setting it to false will stop the decrease. | |
| MicMasterLevelFeedBack | Indicates the gain level for the Mic Master volume on this output. Valid values range from -800 (-80dB) to 100 (10dB). | |
| MicMasterLevelUp | Increases the Mic master volume on this output while the property is true. Setting it to false will stop the increase. | |
| MicMasterMuteOffFeedback | Property that returns true when the Mic Master is not muted on this output, false otherwise. | |
| MicMasterMuteOnFeedback | Property that returns true when the Mic Master is muted on this output, false otherwise. | |
| MicMuteOffFeedback | Property to return the state of the MicMuteOffFeedback for a given microphone on this output | |
| MicMuteOnFeedback | Property to return the state of the MicMuteOnFeedback for a given microphone on this output. | |
| MicPan | Property to set the value of the pan for a given microphone on this output. Valid values range from -32768 to 32768. | |
| MicPanFeedback | Property to read the pan level for a given microphone on this output. Valid values range from -32768 to 32768. | |
| MinVolume | Specifies the minimum volume gain, in tenths of a dB. The MinVolume and MaxVolume properties allow endpoints to be set for volume control. Typically, this property would not be used since the minimum volume can be set through the Front Panel Setup Menus or using the DM Tool in Toolbox. Valid values range from -800 (-80dB) to -400 (-40dB). | |
| MinVolumeFeedback | Reports the current minimum volume gain, in tenths of a dB. Valid values range from -800 (-80dB) to -400 (-40dB). | |
| MixerBypassedFeedback | Indicates that the routed audio input is in mixer bypass mode. Mixer bypass mode allows advanced audio to pass through the HDMI switch. The DMPS3 mixers only support stereo PCM. On digital outputs, this means that the audio is routed directly from the audio source without passing through the mixer. The microphone mix and audio controls are not available. On analog outputs the selected source audio will be muted. Mixer bypass mode is only controllable via the DMPS Tool. | |
| OutputMixerType |
The type of Output Mixer available. See the definition of IOutputMixer interface for more information.
(Inherited from OutputMixerBase) | |
| OutputNumber | Reports the output number of this mixer | |
| OutputVuFeedback | Reports the VU meter feedback value, when VU feedback is enabled. Reported values will range from 0 to 8. | |
| Parent |
The parent that a given object was added to.
(Inherited from OutputMixerBase) | |
| PresetNumber | Specifies the mixer preset number that will save or recall the mixing. Valid values range from 1 to 5. | |
| PresetReadyPulseFeedback |
Pulses to indicate that the system has finished recalling a preset.
The DMOutputChange event will trigger with MixerPresetReadyPulseFeedbackEventId. | |
| RecallingPresetFeedback |
When true, indicates that the system is in the process of recalling mixer preset.
The DMOutputChange event will trigger with RecallingMixerPresetFeedbackEventId. | |
| SourceBalance | Specifies the source balance between the left and right channels on this output stream. Valid values range from -50% (full left) to 50% (full right). Use "SimplSharpDeviceHelper.PercentToUshort" to convert the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert the ushort value to percentage. | |
| SourceBalanceFeedBack | Indicates the source balance between the left and right channels on this output stream. Valid values range from -50% (full left) to 50% (full right). Use "SimplSharpDeviceHelper.PercentToUshort" to convert the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert the ushort value to percentage. | |
| SourceLevel | Specifies the gain level for the Source volume on this output stream. Valid values range from -800 (-80dB) to 100 (10dB). | |
| SourceLevelDown | Decreases the source volume on this output while the property is true. Setting it to false will stop the decrease. | |
| SourceLevelFeedBack | Indicates the gain level for the Source volume on this output stream. Valid values range from -800 (-80dB) to 100 (10dB). | |
| SourceLevelUp | Increases the source volume on this output while the property is true. Setting it to false will stop the increase | |
| SourceMuteOffFeedBack |
Property that returns true when the Source is not muted on this output, false otherwise.
The DMOutputChange event will trigger with SourceMuteOffFeedBackEventId. | |
| SourceMuteOnFeedBack |
Property that returns true when the Source is muted on this output, false otherwise.
The DMOutputChange event will trigger with SourceMuteOnFeedBackEventId. | |
| StartupVolume | Specifies the startup volume in tenths of a dB. The startup volume is the volume level that will be set when the system is turned on. Valid values range from -800 (-80dB) to 100 (10dB). | |
| StartupVolumeFeedback | Reports the current startup volume in tenths of a dB. Valid values range from -800 (-80dB) to 100 (10dB). | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from OutputMixerBase) |
| Name | Description | |
|---|---|---|
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| MasterMuteOff | Performs an unmute of the master on this output. | |
| MasterMuteOn | Performs of a mute of the master on this output. | |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) | |
| MicMasterMuteOff | Performs an unmute of the Mic master on this output. | |
| MicMasterMuteOn | Performs a mute of the Mic master on this output. | |
| MicMuteOff | UnMute the given microphone on this output. | |
| MicMuteOn | Mute the given microphone on this output. | |
| RecallPreset | Recalls the mixer preset given by the MixerPresetNumber property. | |
| SavePreset | Saves the mixer preset given by the MixerPresetNumber property. | |
| SourceMuteOff | Performs an unmute of the Source on this output. | |
| SourceMuteOn | Performs a mute of the Source on this output. | |
| ToString |
String representation of this DM output mixer.
(Inherited from OutputMixerBase) |