Click or drag to resize

POTSReservedSigs Class

Extender class to provide access to the POTS feature of this device.

This class will trigger DeviceExtenderSigChange event.

Inheritance Hierarchy
SystemObject
  Crestron.SimplSharpProDeviceExtender
    Crestron.SimplSharpPro.DeviceSupportPOTSReservedSigs

Namespace: Crestron.SimplSharpPro.DeviceSupport
Assembly: SimplSharpPro (in SimplSharpPro.dll) Version: 2.21.121
Syntax
C#
public class POTSReservedSigs : DeviceExtender, 
	IDialer

The POTSReservedSigs type exposes the following members.

Properties
 NameDescription
Public propertyAlertToneFeedback Indicates that the device has received an alert tone or signal from the remote PSTN or central station.

The DeviceExtenderSigChange event will trigger with BoolChange and AlertToneFeedback.

Protected propertyBooleanInput Bool Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyBooleanOutput Bool Outputs on the device extender.
(Inherited from DeviceExtender)
Public propertyBusyFeedback Indicates that the line being called is busy. The property remains high until another call is placed or received.

The DeviceExtenderSigChange event will trigger with BoolChange and BusyFeedback.

Public propertyCallActiveFeedback Indicates that the outgoing call has connected and is active. The property remains high for the duration of the call. The property goes low when the call is terminated.

The DeviceExtenderSigChange event will trigger with BoolChange and CallActiveFeedback.

Public propertyCallTerminatedFeedback Indicates that a call has been terminated for any reason.

The DeviceExtenderSigChange event will trigger with BoolChange and CallTerminatedFeedback.

Public propertyCallWaitingNumberFeedback Property to report the caller ID of the call that is currently waiting.

The DeviceExtenderSigChange event will trigger with StringChange and CallWaitingNumberFeedback.

Public propertyCallWaitingToneFeedback Indicates that a call waiting tone is detected. The property remains high for as long as the call waiting tone is detected.

The DeviceExtenderSigChange event will trigger with BoolChange and CallWaitingToneFeedback.

Public propertyConnectedFeedback Indicates that this dialer has a valid POTS connection.

The DeviceExtenderSigChange event will trigger with BoolChange and ConnectedFeedback.

Public propertyCountryCode Sets the country specific POTS configuration defined by the Country selection. The valid values are defined in eCountryCodeForPots
Public propertyCountryCodeFeedback Reports the current country code. The valid values are defined in eCountryCodeForPots. The default value is USA

The DeviceExtenderSigChange event will trigger with UShortChange and CountryCodeFeedback.

Public propertyDialingFeedback Indicates that the POTS call is currently dialing or connecting.The property remains high for as long as the call is connecting. The property goes low when the call connects or is terminated.

The DeviceExtenderSigChange event will trigger with BoolChange and DialingFeedback.

Public propertyDialString The number to dial.
Public propertyDialToneFeedback Indicates that a dial tone is detected. The property remains high for as long as the dial tone is detected.

The DeviceExtenderSigChange event will trigger with BoolChange and DialToneFeedback.

Public propertyDisabledFeedback Indicates that the POTS functionality is disabled on the device..

The DeviceExtenderSigChange event will trigger with BoolChange and DisabledFeedback.

Public propertyDoNotDisturbFeedback Indicates the status of Do Not Disturb feature.

The DeviceExtenderSigChange event will trigger with BoolChange and DoNotDisturbFeedback.

Public propertyEnabledFeedback Indicates that the POTS functionality is enabled on the device.

The DeviceExtenderSigChange event will trigger with BoolChange and EnabledFeedback.

Public propertyHoldFeedback Indicates that the current call is on hold.

The DeviceExtenderSigChange event will trigger with BoolChange and HoldFeedback.

Public propertyIncomingCallDetectedFeedback Indicates that an incoming call has arrived. The property goes low when the call is answered, declined or terminated.

The DeviceExtenderSigChange event will trigger with BoolChange and IncomingCallDetectedFeedback.

Public propertyIncomingCallerInformationFeedback The number of the incoming call ( Caller Id).

The DeviceExtenderSigChange event will trigger with StringChange and IncomingCallerInformationFeedback.

Public propertyIncomingCallFeedbackObsolete.
Indicates information about the current incoming call.
Public propertyIncomingFeedbackObsolete.
Indicates that an incoming call has arrived.
Public propertyMyPhoneNumberFeedback Property to report the device's assigned phone number

The DeviceExtenderSigChange event will trigger with StringChange and MyPhoneNumberFeedback.

Public propertyOwner Object that this dialer is apart of.
Public propertyRingbackFeedback Indicates that the control system is waiting for a response to an POTS invitation from the target device. The property pulses every 2 seconds while waiting for the remote party to answer.

The DeviceExtenderSigChange event will trigger with BoolChange and RingbackFeedback.

Public propertyRingingFeedback Indicates that an incoming call is waiting to be answered or declined. The property pulses every 2 seconds while the incoming call is ringing. The property goes low when the call is answered, declined or terminated.

The DeviceExtenderSigChange event will trigger with BoolChange and RingingFeedback.

Protected propertyStringInput String Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyStringOutput String Outputs on the device extender.
(Inherited from DeviceExtender)
Public propertyType Indicates the type of dialer this object represents.
Protected propertyUShortInput UShort Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortOutput UShort Outputs on the device extender.
(Inherited from DeviceExtender)
Top
Methods
 NameDescription
Public methodAnswer Method to answer an incoming call.
Public methodDial0 Method to dial digit "0".
Public methodDial1 Method to dial digit "1".
Public methodDial2 Method to dial digit "2".
Public methodDial3 Method to dial digit "3".
Public methodDial4 Method to dial digit "4".
Public methodDial5 Method to dial digit "5".
Public methodDial6 Method to dial digit "6".
Public methodDial7 Method to dial digit "7".
Public methodDial8 Method to dial digit "8".
Public methodDial9 Method to dial digit "9".
Public methodDialAsterisk Method to dial an asterisk.
Public methodDialPound Method to dial a pound sign "#".
Public methodDisable Method to disable the POTS functionality on this device.
Public methodDoNotDisturb Method to toggle the Do Not Disturb setting.
Public methodEnable Method to enable the POTS functionality on this device.
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Protected methodFinalizeAllows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.
(Inherited from Object)
Public methodFlash Method to switch the current call and the call on call waiting.
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Public methodHangup Method to terminate the current call or reject any incoming call.
Protected methodInitializeJoins Method to initialize the joins of the extender.
(Overrides DeviceExtenderInitializeJoins)
Protected methodMapAnalogInputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapAnalogOutputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapDigitalInputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapDigitalOutputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapSerialInputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMapSerialOutputJoins Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender)
Protected methodMemberwiseCloneCreates a shallow copy of the current Object.
(Inherited from Object)
Public methodReject Method to reject any incoming call.
Protected methodSendCueEventDataForDeviceExtender Function to trigger the DeviceExtender Sig Change event
(Inherited from DeviceExtender)
Public methodToStringReturns a string that represents the current object.
(Inherited from Object)
Public methodUse Set the extender as usable on the device. Call this method before registration of the device.
(Inherited from DeviceExtender)
Top
Events
 NameDescription
Public eventDeviceExtenderSigChange Event to receive sig information intended for a device extender. When processing this event, it will hold off other sigs from being received from the device. If one desires to continue processing the data and receive more information, launch a new thread and allow this event to exit.
(Inherited from DeviceExtender)
Top
Fields
 NameDescription
Protected field_InUse Bool to determine if the extended is in use by the user.
(Inherited from DeviceExtender)
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also