POTSReserved |
The POTSReservedSigs type exposes the following members.
| Name | Description | |
|---|---|---|
| AlertToneFeedback |
Indicates that the device has received an alert tone or signal from the remote PSTN or central station.
The DeviceExtenderSigChange event will trigger with BoolChange and AlertToneFeedback. | |
| BooleanInput |
Bool Inputs on the device extender.
(Inherited from DeviceExtender) | |
| BooleanOutput |
Bool Outputs on the device extender.
(Inherited from DeviceExtender) | |
| BusyFeedback |
Indicates that the line being called is busy.
The property remains high until another call is placed or received.
The DeviceExtenderSigChange event will trigger with BoolChange and BusyFeedback. | |
| CallActiveFeedback |
Indicates that the outgoing call has connected and is active.
The property remains high for the duration of the call. The property goes low when the call is terminated.
The DeviceExtenderSigChange event will trigger with BoolChange and CallActiveFeedback. | |
| CallTerminatedFeedback |
Indicates that a call has been terminated for any reason.
The DeviceExtenderSigChange event will trigger with BoolChange and CallTerminatedFeedback. | |
| CallWaitingNumberFeedback |
Property to report the caller ID of the call that is currently waiting.
The DeviceExtenderSigChange event will trigger with StringChange and CallWaitingNumberFeedback. | |
| CallWaitingToneFeedback |
Indicates that a call waiting tone is detected. The property remains high for as long as the call waiting tone is detected.
The DeviceExtenderSigChange event will trigger with BoolChange and CallWaitingToneFeedback. | |
| ConnectedFeedback |
Indicates that this dialer has a valid POTS connection.
The DeviceExtenderSigChange event will trigger with BoolChange and ConnectedFeedback. | |
| CountryCode | Sets the country specific POTS configuration defined by the Country selection. The valid values are defined in eCountryCodeForPots | |
| CountryCodeFeedback |
Reports the current country code. The valid values are defined in eCountryCodeForPots.
The default value is USA The DeviceExtenderSigChange event will trigger with UShortChange and CountryCodeFeedback. | |
| DialingFeedback |
Indicates that the POTS call is currently dialing or connecting.The property remains high for as long as the call is connecting.
The property goes low when the call connects or is terminated.
The DeviceExtenderSigChange event will trigger with BoolChange and DialingFeedback. | |
| DialString | The number to dial. | |
| DialToneFeedback |
Indicates that a dial tone is detected. The property remains high for as long as the dial tone is detected.
The DeviceExtenderSigChange event will trigger with BoolChange and DialToneFeedback. | |
| DisabledFeedback |
Indicates that the POTS functionality is disabled on the device..
The DeviceExtenderSigChange event will trigger with BoolChange and DisabledFeedback. | |
| DoNotDisturbFeedback |
Indicates the status of Do Not Disturb feature.
The DeviceExtenderSigChange event will trigger with BoolChange and DoNotDisturbFeedback. | |
| EnabledFeedback |
Indicates that the POTS functionality is enabled on the device.
The DeviceExtenderSigChange event will trigger with BoolChange and EnabledFeedback. | |
| HoldFeedback |
Indicates that the current call is on hold.
The DeviceExtenderSigChange event will trigger with BoolChange and HoldFeedback. | |
| IncomingCallDetectedFeedback |
Indicates that an incoming call has arrived.
The property goes low when the call is answered, declined or terminated.
The DeviceExtenderSigChange event will trigger with BoolChange and IncomingCallDetectedFeedback. | |
| IncomingCallerInformationFeedback |
The number of the incoming call ( Caller Id).
The DeviceExtenderSigChange event will trigger with StringChange and IncomingCallerInformationFeedback. | |
| IncomingCallFeedback | Obsolete. Indicates information about the current incoming call. | |
| IncomingFeedback | Obsolete. Indicates that an incoming call has arrived. | |
| MyPhoneNumberFeedback |
Property to report the device's assigned phone number
The DeviceExtenderSigChange event will trigger with StringChange and MyPhoneNumberFeedback. | |
| Owner | Object that this dialer is apart of. | |
| RingbackFeedback |
Indicates that the control system is waiting for a response to an POTS invitation from the target device.
The property pulses every 2 seconds while waiting for the remote party to answer.
The DeviceExtenderSigChange event will trigger with BoolChange and RingbackFeedback. | |
| RingingFeedback |
Indicates that an incoming call is waiting to be answered or declined.
The property pulses every 2 seconds while the incoming call is ringing. The property goes low when the call is answered, declined or terminated.
The DeviceExtenderSigChange event will trigger with BoolChange and RingingFeedback. | |
| StringInput |
String Inputs on the device extender.
(Inherited from DeviceExtender) | |
| StringOutput |
String Outputs on the device extender.
(Inherited from DeviceExtender) | |
| Type | Indicates the type of dialer this object represents. | |
| UShortInput |
UShort Inputs on the device extender.
(Inherited from DeviceExtender) | |
| UShortOutput |
UShort Outputs on the device extender.
(Inherited from DeviceExtender) |