Glpp |
The Glpp1Sw3Ex type exposes the following members.
| Name | Description | |
|---|---|---|
| Button |
Get the collection of the Button objects for this device.
(Inherited from GlppBase) | |
| CommandReceivedFeedbacks |
Property to indicate that the corresponding button on the IR remote has been pressed.
(Inherited from GlppBase) | |
| ConnectedIpList |
A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID.
This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null.
If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected.
The order of items in this list is not guaranteed.
(Inherited from GenericDevice) | |
| ContactClosure |
Get the Button object corresponding to the ContactClosure button
for this device.
(Inherited from GlppBase) | |
| CurrentTimeoutFeedback |
Property to report the current timeout period.
The GlppOccupancySensorIrChange event will trigger with TimeoutFeedbackEventId. (Inherited from GlppBase) | |
| DaylightingActiveFeedback |
Property to indicate the status of daylighting.
(Inherited from GlppBase) | |
| DefeatLocalButtonLogic |
Property to disable local button logic.
(Inherited from GlppBase) | |
| DefeatLocalMotionLogic |
Property to disable all local (internal, factory-programmed) occupancy sensor logic.
(Inherited from GlppBase) | |
| DefeatLocalPhotocellLogic |
Property to disable all local (internal, factory-programmed) photocell logic.
(Inherited from GlppBase) | |
| Description |
Get/Set the description of this device.
(Inherited from GenericBase) | |
| DisableNightlightMode |
Property to turn off LED "nightlight" mode.
(Inherited from GlppBase) | |
| Disposed |
Property to indicate if the device has been disposed.
(Inherited from GenericDevice) | |
| EnableRawMotionData |
Property to enable raw motion data reporting.
(Inherited from GlppBase) | |
| EnableRawPhotocellData |
Property to enable raw photocell data reporting.
(Inherited from GlppBase) | |
| ID |
Property to get the ID of the device.
(Inherited from GenericDevice) | |
| IsOnline |
Property to get the current online state of the device.
(Inherited from GenericDevice) | |
| Name |
Get the name of this device.
(Inherited from GenericBase) | |
| NumberOfLoads |
The number of Lighting Loads for the GLPP Series Device.
(Inherited from GlppBase) | |
| OccupancyActionFeedback |
Property to report the currently selected occupancy action, which will be triggered when the room goes from the unoccupied to the occupied state.
(Inherited from GlppBase) | |
| OccupancyDetectedFeedback |
Property to indicate the occupancy status of the room.
The GlppOccupancySensorIrChange event will trigger with RoomIsOccupiedFeedbackEventId. (Inherited from GlppBase) | |
| OffLastRecallFeedback |
Property to indicate that the last preset that have been recalled is set to off.
(Inherited from GlppBase) | |
| OnLastRecallFeedback |
Property to indicate that the last preset that have been recalled is set to on.
(Inherited from GlppBase) | |
| OutputEnable |
Property to allow the IR remote button presses to be reported.
(Inherited from GlppBase) | |
| Parent |
The parent that a given object was added to.
(Inherited from GenericBase) | |
| PhotocellLoads |
Photocell Loads of the GLPP Series Device.
(Inherited from GlppBase) | |
| PhotoSensorResponseTimeFeedback |
Property to report the photo sensor response time (adjusted by the "IncreaseResponseTime/DecreaseResponseTime" methods).
(Inherited from GlppBase) | |
| PhotoSensorValueFeedback |
Property to report the raw photo sensor value if the "EnableRawPhotocellData" property value is true.
(Inherited from GlppBase) | |
| Presets |
Collection of Presets for the GLPP Series Device.
(Inherited from GlppBase) | |
| ProductIdFeedback |
Property to report the device's Product ID. Internal use only.
(Inherited from GlppBase) | |
| RawOccupancyStateFeedback |
Property to track the state of the occupancy sensor, when raw motion data is enabled.
(Inherited from GlppBase) | |
| Registerable |
Property to indicate that this device can be registered.
(Inherited from GenericDevice) | |
| Registered |
Property to get the current registration state of the device.
(Inherited from GenericDevice) | |
| RegistrationFailureReason |
Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice) | |
| RemoteSwitchType |
Property to specify the type of 3rd party switch attached to the Keypad+/- terminal of the GLPP device.
(Inherited from GlppBase) | |
| RemoteTimeout |
Property to set the timeout period, which is the interval that must elapse with no motion
detected before the state of the room changes from occupied to unoccupied.
(Inherited from GlppBase) | |
| SetLedOn |
Property to set the feedback state of the GLPAA keypad LED indicator to ON.
(Inherited from GlppBase) | |
| SetOccupancyAction |
Property to set the action that will be triggered when the room goes from the unoccupied to the occupied state.
The valid values for the action are defined in eOccupancyActions Enum.
(Inherited from GlppBase) | |
| SetVacatingAction |
Property to set the action that will be triggered when the room goes from the occupied to the unoccupied state.
The valid values for the action are defined in eVacatingActions Enum.
(Inherited from GlppBase) | |
| SIMPLDeviceImplementation |
Internal protected member used for actual device control.
(Inherited from GenericDevice) | |
| SwitchedLoads |
Collection of switched loads on this device.
(Inherited from GlppSwitchBase) | |
| SystemAddressReceivedFeedback |
Property to report the IR ID of the IR remote. Reported values will range from 0d (IRID 00) to 31d (IRID 0x1F).
(Inherited from GlppBase) | |
| Type |
Property to determine to type of device this is.
(Inherited from GenericDevice) | |
| UnRegistrationFailureReason |
Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from GenericBase) | |
| VacatingActionFeedback |
Property to report the currently selected vacating action, which will be triggered when the room goes from the occupied to the unoccupied state.
(Inherited from GlppBase) | |
| XioEndpointStubSIMPLDevice |
The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the
correct place in hierarchy.
(Inherited from GenericDevice) |