Csm |
The CsmQmtdc1631Sg type exposes the following members.
| Name | Description | |
|---|---|---|
| Close |
Moves the shade to the lower limit.
(Inherited from ShadeBase) | |
| DisableLocatingBeeper | Method to disable the locating beeper (before the turn off timeout if enabled) and resets the turn off timeout. | |
| DisableStateInformation |
Method to prevent the ShadeBase device from reporting state information to the control system.
(Inherited from ShadeBase) | |
| Dispose |
Clean up of resources.
(Inherited from GenericBase) | |
| Dispose(Boolean) |
Method to perform the actual disposing of the device.
(Inherited from GenericDevice) | |
| EnableLocatingBeeper | Method to enable the locating beeper. Shade has timeout to turn off beeper on its own. It should beep until the timeout occurs OR it is identified. (whether its button pressed or some other means). Calling of EnableLocatingBeeper restarts timeout. Calling of DisableLocatingBeeper disables the locating beeper and resets the timeout. | |
| EnableStateInformation |
Method to allow the ShadeBase device to report state information to the control system.
(Inherited from ShadeBase) | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize |
Destructor of the device.
(Inherited from GenericDevice) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| InitializeDevice |
Method to initialize the ShadeBase device.
(Inherited from ShadeBase) | |
| InitializeShadeErrorStatus |
Method to initialize the shade error status sig information.
(Inherited from ShadeBase) | |
| InitializeShadeInputs |
Method to initialize the input sig information.
(Inherited from ShadeBase) | |
| InitializeShadeOutputs |
Method to initialize the output sig information.
(Inherited from ShadeBase) | |
| InitializeSpecificShadeDevice |
Initialize the sigs the are specific to this shade device.
(Overrides CsmQmtdcExBaseClassInitializeSpecificShadeDevice) | |
| OnBaseEvent(Int32) |
Protected member used to fire the BaseEvent with the default extended information.
(Inherited from GenericBase) | |
| OnBaseEvent(Int32, UInt16) |
Protected member used to fine the BaseEvent with extended event information.
(Inherited from GenericBase) | |
| Open |
Moves the shade to the upper limit.
(Inherited from ShadeBase) | |
| Register |
Register this device with the system.
(Inherited from GenericDevice) | |
| SendParameters |
Function for sending parameters on the fly.
Not Currently implemented. This will throw a NotSupportedException
(Inherited from ShadeBase) | |
| SetPosition |
Method to send the ShadeBase to a particular position where 0x0000 is the lower limit and 0xffff corresponds to the upper limit.
(Inherited from ShadeBase) | |
| Speed |
Method to set the rotational speed of the shade's motor. Valid Range is from 10 to 30, if set to zero the default of 25 is used.
Sets the shade speed in RPM. Valid range is 10 to 30. A value of 0 is interpreted as defalt speed of 25RPM. Nonzero values outside of valid range are clamped to the 10-30 RPM limits.
[!:CsmQmtdc1633SgRc] will support 3 speeds: those are 15, 18 and 20. The following are more details on the valid speeds.
For RPM less than 15 shade speed is set to 15
For RPM greater than 20 shade speed is set to 20
For RPM = 16 shade speed is set to 15
For RPM = 17 shade speed is set to 18
For RPM = 19 shade speed is set to 20
(Inherited from CsmQmtdcExBaseClass) | |
| Stop |
Stops all shade movement.
(Inherited from ShadeBase) | |
| ToString |
Return the name of the device.
(Inherited from GenericDevice) | |
| UnRegister |
Unregister this device with the system. This function can not be called from the device's own SigChange event handler.
On successful unregistration, if this device supports the OnlineStatusChange event, it will trigger indicating the device when offline. (Inherited from GenericDevice) |