Dm |
The DmNvxControl type exposes the following members.
| Name | Description | |
|---|---|---|
| ActiveAudioSourceFeedback |
Property to feedback the currently active audio source for the encoder / HDMI output.
The BaseEvent event will trigger with ActiveAudioSourceEventId. | |
| ActiveBtsAudioSourceFeedback |
Property to get the audio source for the Active BTS Audio Source.
The BaseEvent event will trigger with ActiveBtsAudioSourceFeedbackEventId. This property is only supported by "DmNvx384","DmNvx384C","DmNvx385","DmNvx385C" devices. | |
| ActiveDanteAudioSourceFeedback |
Property to feedback the audio source for the Active Dante/AES-67 Audio Source.
This property is supported only for "DmNvx352" and "DmNvx352C" devices only.
The BaseEvent event will trigger with ActiveDanteAudioSourceEventId. | |
| ActiveDmNaxAudioSourceFeedback |
Property to feedback the currently active audio source for the DM NAX output.
The BaseEvent event will trigger with ActiveDmNaxAudioSourceFeedbackEventId. | |
| ActiveeArcAudioSourceFeedback |
Property to get the audio source for the Active eARC Audio Source.
The BaseEvent event will trigger with ActiveeArcAudioSourceFeedbackEventId. This property is only supported by "DmNvx384","DmNvx384C","DmNvx385","DmNvx385C" devices. | |
| ActiveVideoSourceFeedback |
Property to feedback the currently active video source for the encoder / HDMI output if DisableAutomaticInputRoutingFeedback is false and EnableAutomaticInputRoutingFeedback is true.
The BaseEvent event will trigger with ActiveVideoSourceEventId. This property is not supported by DMF-XX-4K-SFP,"DmNvxD30","DmNvxD30C","DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices. | |
| AnalogAudioOutputVolume | Property to set the volume of the stream. Valid values range from -800 (-80dB) to +240 (+24dB), where 1 = 0.1dB Note, steps are in 0.5 db, out of range values will be rounded to the closest 0.5 db. | |
| AnalogAudioOutputVolumeFeedback |
Property to report the current volume of the stream.
Valid values range from -800 (-80dB) to +240 (+24dB), where 1 = 0.1dB
Note, steps are in 0.5 db, out of range values will be rounded to the closest 0.5 db.
The BaseEvent event will trigger with VolumeEventId. | |
| AudioDelay | Property to adjust analog audio output delay. This property is supported only for "DmNvx351" and "DmNvx351C" devices only. | |
| AudioDelayFeedback |
Property to report the current audio output delay value.
This property is supported only for "DmNvx351" and "DmNvx351C" devices only.
The BaseEvent event will trigger with DelayEventId. | |
| AudioMutedFeedback |
Property to indicate that the audio is muted.
'true' = audio muted; 'false' = audio not muted.
The BaseEvent event will trigger with AudioMuteEventId. (Inherited from DmRmc100StrControl) | |
| AudioSource | Property to select the audio source for the encoder / HDMI output. | |
| AudioSourceFeedback |
Property to report the currently selected audio source for the encoder / HDMI output.
The BaseEvent event will trigger with AudioSourceEventId. | |
| AudioUnmutedFeedback |
Property to indicate that the audio is unmuted.
'true' = audio unmuted; 'false' = audio not unmuted.
The BaseEvent event will trigger with AudioUnmuteEventId. (Inherited from DmRmc100StrControl) | |
| BtsAudioSource | Property to select the audio source for the BTS Audio Output. This property is only supported by "DmNvx384","DmNvx384C","DmNvx385","DmNvx385C" devices. | |
| BtsAudioSourceFeedback |
Property to report the currently selected audio source for the BTS Audio output.
The BaseEvent event will trigger with BtsAudioSourceFeedbackEventId. This property is only supported by "DmNvx384","DmNvx384C","DmNvx385","DmNvx385C" devices. | |
| Card |
Get the card that this DmcStrControl is apart of.
This property will trigger DMOutputChange with DMOutputEventIds for Dmco70/Dmco73/Dmco74/Dmco75/Dmco76/Dmco77 and DmcStroSingle objects. This property will trigger DMInputChange with DMOutputEventIds for DmcStr/DmcStrCresnet and "DmTxRx100Str" objects. (Inherited from DmcStrControl) | |
| CardSlotInfoFeedback |
Property to report the current slot of a DM-NVX-35xC installed in a chassis.
This property is supported only for "DmNvx350","DmNvx350C","DmNvx351" and "DmNvx351C" devices only.
Maximum length of the string is 200 characters.
The BaseEvent event will trigger with CardSlotInfoFeedbackEventId. | |
| ChassisSerialNumberFeedback |
Property to report the serial number of the chassis where the DM-NVX-35xC is installed.
This property is supported only for "DmNvx350","DmNvx350C","DmNvx351" and "DmNvx351C" devices only.
Maximum length of the string is 200 characters.
The BaseEvent event will trigger with ChassisSerialNumberFeedbackEventId. | |
| DanteAes67Name | Property to set the name of the Dante/AES67 module which will appear in the dante controller. By default this name will consist of the product name and a combination of the DM-NVX mac address and Audinate mac address. This property is supported only for "DmNvx352" and "DmNvx352C" devices only. Maximum length is 32 characters. | |
| DanteAes67NameFeedback |
Property to report the name of the Dante/AES67 module which will appear in the dante controller. By default this name will consist of the product name and a combination of the DM-NVX mac address and Audinate mac address.
This property is supported only for "DmNvx352" and "DmNvx352C" devices only.
Maximum length is 32 characters.
DM-NVX-352-xxxxxxyyyyyy
x = last 6 characters of DM-NVX Mac address
y = last 6 characters of Audinate Mac address
The BaseEvent event will trigger with DanteAes67NameFeedbackEventId. | |
| DanteAudioSource | Property to select the audio source for the Dante/AES67 Output. This property is supported only for "DmNvx352" and "DmNvx352C" devices only. | |
| DanteAudioSourceFeedback |
Property to report the currently selected audio source for the Dante/AES67 Output.
The BaseEvent event will trigger with DanteAudioSourceEventId. This property is supported only for "DmNvx352" and "DmNvx352C" devices only. | |
| DecoderReadyFeedback |
Property to indicate that the Decoder is ready. Not supported by "DmTxRx100Str".
'true = Decoder ready; 'false' = Decoder not ready.
The DMInputChange event will trigger with DecoderReadyEventId when DmcStr is connected to a Switch. The BaseEvent event will trigger with DecoderReadyEventId for DMCI Version of DmcStr or DmcStrCresnet. (Inherited from DmcStriControl) | |
| DeviceMode | Property to set the device mode. | |
| DeviceModeFeedback |
Property to return the current device mode.
The BaseEvent event will trigger with DeviceModeFeedbackEventId. | |
| DeviceReadyFeedback |
Property to indicate that the device is ready to start streaming or preview video. The device may not be ready if the IP address has changed or another system event has caused a re-configuration. The appropriate feedback for those parameters should be checked to ensure that the stream starts correctly.
Start signals will be ignored until the device is ready to start streaming.
true = Device is ready; false = Device is not ready.
The BaseEvent event will trigger with DeviceReadyEventId. | |
| DisableAutomaticInitiationFeedback |
Property to indicate the automatic initiation disabled status.
'true = Automatic Initiation disabled; 'false' = Automatic Initiation enabled.
This property is not supported by DMF-XX-4K-SFP device.
The BaseEvent event will trigger with AutomaticInitiationDisabledEventId. (Inherited from DmRmc100StrControl) | |
| DisableAutomaticInputRoutingFeedback |
Property to indicate the automatic input routing disabled status.
'true = Automatic Input Routing disabled; 'false' = Automatic Input Routing enabled.
This property is not supported by DMF-XX-4K-SFP,"DmNvxD30","DmNvxD30C","DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices.
The BaseEvent event will trigger with AutomaticInputRoutingDisabledEventId. (Inherited from DmfXx4kSfpControl) | |
| DisableLedsFeedback |
Property to indicate the LEDs disabled status.
'true' = LEDs enabled; 'false' = LEDs disabled.
This property is not supported by DMF-XX-4K-SFP, "DmNvxD80Ioav" devices.
The BaseEvent event will trigger with LedsDisabledEventId. (Inherited from DmRmc100StrControl) | |
| DmNaxAudioSource | Property to select the audio source for the DM NAX Output. | |
| DmNaxAudioSourceFeedback |
Property to report the currently selected audio source for the DM NAX output.
The BaseEvent event will trigger with DmNaxAudioSourceFeedbackEventId. | |
| DspSourceSelect | Property to select the DSP source in RX mode. If this property is supported by the device Auto will be returned. | |
| DspSourceSelectFeedback |
Property to report the DSP source selected in RX mode. If the property is supported by the device Auto will be returned.
The BaseEvent event will trigger with DspSourceSelectFeedbackEventId. | |
| eArcAudioSource | Property to select the audio source for the eARC Output. This property is only supported by "DmNvx384","DmNvx384C","DmNvx385","DmNvx385C" devices. | |
| eArcAudioSourceFeedback |
Property to report the currently selected audio source for the eARC output.
The BaseEvent event will trigger with eArcAudioSourceFeedbackEventId. This property is only supported by "DmNvx384","DmNvx384C","DmNvx385","DmNvx385C" devices. | |
| ElapsedSecFeedback | Obsolete. Indicates the time elapsed (in seconds) since streaming was started. (Inherited from DmcStrControl) | |
| ElapsedSecondsFeedback |
Indicates the time elapsed (in seconds) since streaming was started.
The BaseEvent event will trigger with ElapsedSecEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with ElapsedSecEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with ElapsedSecEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. This property is no longer supported by "DmNvx350", "DmNvx351", "DmNvx350C" and "DmNvx351C" from the device firmware version 1.3626.00020 onwards.(Inherited from DmcStrControl) | |
| EnableAutomaticInitiationFeedback |
Property to indicate the automatic initiation enabled status.
'true' = Automatic Initiation enabled; 'false' = Automatic Initiation disabled.
This property is not supported by DMF-XX-4K-SFP device.
The BaseEvent event will trigger with AutomaticInitiationEnabledEventId. (Inherited from DmRmc100StrControl) | |
| EnableAutomaticInputRoutingFeedback |
Property to indicate the automatic input routing enabled status.
'true' = Automatic Input Routing enabled; 'false' = Automatic Input Routing disabled.
This property is not supported by DMF-XX-4K-SFP,"DmNvxD30","DmNvxD30C","DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices.
The BaseEvent event will trigger with AutomaticInputRoutingEnabledEventId. (Inherited from DmfXx4kSfpControl) | |
| EnableLedsFeedback |
Property to indicate the LEDs enabled status.
This property is not supported by DMF-XX-4K-SFP, "DmNvxD80Ioav" devices.
'true' = LEDs enabled; 'false' = LEDs disabled.
The BaseEvent event will trigger with LedsEnabledEventId. (Inherited from DmRmc100StrControl) | |
| FanControl | Property to select the Fan control Mode. If the property is not supported then "eFanControl.Auto" will return | |
| FanControlFeedback |
Property to report the Fan Control.
The DMInputEventIds event will trigger with FanControlFeedbackEventId. | |
| FanStatusFeedback |
Property to report the Fan Status.
The DMInputEventIds event will trigger with FanStatusFeedbackEventId. | |
| InitiatorAddressFeedback |
Property to return the Initiator Address.
The DMInputChange event will trigger with InitiatorAddressEventId when DmcStr is connected to a Switch. The BaseEvent event will trigger with InitiatorAddressEventId for DMCI Version of DmcStr or DmcStrCresnet or "DmTxRx100Str". (Inherited from DmcStriControl) | |
| InputOutput |
The Input/Output card that this DmcStrControl is a part of.
(Inherited from DmcStrControl) | |
| MulticastAddress |
Specifies the multicast address to which the card will try to stream if SessionInitiation = MulticastViaRTSP.
This property is not supported by "DmNvxE30", "DmNvxE30C", "DmNvxE31" and "DmNvxE31C" devices.
(Inherited from DmcStrControl) | |
| MulticastAddressFeedback |
Indicates the multicast address to which the card is streaming if SessionInitiation = MulticastViaRTSP.
The BaseEvent event will trigger with MulticastAddressEventId for DMCI Version of DmcStr, for DmcStrCresnet, for "DmTxRx100Str", or for "DmNvxBaseClass". The DMInputChange event will trigger with MulticastAddressEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with MulticastAddressEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| Name |
Property to set the name of the detected midpoint for DmfXx4kSfp.
Property to set the name of the device to be used to name the device in the chassis, web interface, and stream subscriptions for "DmNvx350", "DmNvx351", "DmNvx352", "DmNvx350C", "DmNvx351C" or "DmNvx352C".
This property is same as "DeviceName" join in SIMPL Windows for "DmNvx350", "DmNvx351", "DmNvx350C" or "DmNvx351C".
(Inherited from DmfXx4kSfpControl) | |
| NameFeedback |
Property to return the name of the detected midpoint for DmfXx4kSfp.
Property to return the name of the device that is used to name the device in the chassis, web interface, and stream subscriptions for "DmNvx350", "DmNvx351", "DmNvx352", "DmNvx350C", "DmNvx351C" or "DmNvx352C".
This property is same as "DeviceNameFeedback" join in SIMPL Windows for "DmNvx350", "DmNvx351", "DmNvx350C" or "DmNvx351C".
The BaseEvent event will trigger with NameFeedbackEventId. (Inherited from DmfXx4kSfpControl) | |
| OnlineFeedback |
Indicates whether the card is online or offline; that is, whether it is running properly (responding to polls) on the internal network.
The output will remain 'true' for as long as the card is online.
'true = Card online (running); 'false' = Card offline (not running)
This property is applicable only when the DM Card is connected to a Switch.
The DMInputChange event will trigger with OnlineFeedbackEventId. (Inherited from DmcStriControl) | |
| Parent |
The parent that a given object was added to.
(Inherited from DmcStrControl) | |
| Parent2 |
Set to the second parent if a given object has more than one parent.
(Inherited from DmcStrControl) | |
| Password |
Sets the password for the stream.
The password can consist of up to 200 characters.
(Inherited from DmcStrControl) | |
| PasswordFeedback |
Text string that reports the password used for the stream.
The BaseEvent event will trigger with PasswordEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with PasswordEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with PasswordEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| PauseFeedback |
Indicates that the stream is paused.
The output remains 'true' for as long as the stream is paused.
This property is not supported by "DmNvxD30", "DmNvxD30C", "DmNvx350", "DmNvx350C", "DmNvx351", "DmNvx351C", "DmNvxD30", "DmNvxD30C", "DmNvxE30", "DmNvxE30C", "DmNvxE31" and "DmNvxE31C" devices.
The BaseEvent event will trigger with PauseEventId for "DmTxRx100Str" and for DMCI version of DmcStr. The DMInputChange event will trigger with PauseEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with PauseEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| PointToPointMode | Get/Set the point to point mode. 0d=Auto. Point to point mode wil automaticaly be active when a TX and RX are connected to each other, not through a network. 1d=Disable. This will never allow point to point mode to be anebled automaticaly. Value passed for point to point is not defined in the enum DmNvxControlePointToPointMode. | |
| PointToPointModeFeedback |
Property to report point to point mode.
The BaseEvent event will trigger with PointToPointModeFeedbackEventId. | |
| PointToPointStatusFeedback |
Property to report point to point status.
The BaseEvent event will trigger with PointToPointStatusFeedbackEventId. | |
| PresentFeedback |
Indicates whether the card is physically plugged into the card slot on the Switch.
The output will remain 'true' for as long as the card is detected.
'true = Card present; 'false' = Card not installed.
This property is applicable only when the DM Card is connected to a Switcher.
The DMInputChange event will trigger with PresentFeedbackEventId. (Inherited from DmcStriControl) | |
| ProcessingFeedback |
Property to indicate the processing status.
'true = Processing in progress; 'false' = Processing not in progress.
The DMInputChange event will trigger with ProcessingEventId when DmcStr is connected to a Switch. The BaseEvent event will trigger with ProcessingEventId for DMCI Version of DmcStr, or DmcStrCresnet, or "DmTxRx100Str". (Inherited from DmcStriControl) | |
| RebootRequiredFeedback |
Property to indicate the reboot required status of the device.
This property is not supported by DMF-XX-4K-SFP,"DmNvxD30","DmNvxD30C","DmNvxE30","DmNvxE30C","DmNvxE31", "DmNvxE31C",
"DmNvxD10", "DmNvxD20", "DmNvxE10", "DmNvxE20" and "DmNvxD200" devices.
The BaseEvent event will trigger with RebootRequiredEventId. (Inherited from DmRmc100StrControl) | |
| RemoteEndDetectedFeedback |
Property to indicate if the remote end is detected.
The BaseEvent event will trigger with RemoteEndDetectedEventId. (Inherited from DmfXx4kSfpControl) | |
| ServerUrl |
Property to set the Server URL. Setting this property will set the StreamLocation property of the "DmNvxBaseClass".
This property is not supported by "DmNvxE30" and "DmNvxE30C" devices.
(Inherited from DmcStriControl) | |
| ServerUrlFeedback |
Property to return the current Server URL. Reading this property returns the StreamLocation property of the "DmNvxBaseClass".
The DMInputChange event will trigger with ServerUrlEventId when DmcStr is connected to a Switch. The BaseEvent event will trigger with ServerUrlEventId for DMCI Version of DmcStr or DmcStrCresnet or "DmTxRx100Str". (Inherited from DmcStriControl) | |
| SessionInitiation |
Specifies the session initiation status
(Inherited from DmcStrControl) | |
| SessionInitiationFeedback |
Reports the current session initiation status
The BaseEvent event will trigger with SessionInitiationEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with SessionInitiationEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with SessionInitiationEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| StartFeedback |
Indicates if streaming has started.
'true' = Streaming started; 'false' = Streaming has not started.
The BaseEvent event will trigger with StartEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str".Switch. The DMInputChange event will trigger with StartEventId when DmcStr card is connected to a Switch. The DMOutputChange event will trigger with StartEventId when Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle cards are connected to a Switch. (Inherited from DmcStrControl) | |
| StatusFeedback |
Property to report the streaming status.
The DMInputChange event will trigger with StatusEventId when DmcStr is connected to a Switch. The BaseEvent event will trigger with StatusEventId for DMCI Version of DmcStr or DmcStrCresnet or "DmTxRx100Str". (Inherited from DmcStriControl) | |
| StatusTextFeedback |
Property to return the status text.
The DMInputChange event will trigger with StatusTextEventId when DmcStr is connected to a Switch. The BaseEvent event will trigger with StatusTextEventId for DMCI Version of DmcStr or DmcStrCresnet or "DmTxRx100Str". (Inherited from DmcStriControl) | |
| StillImageDetectionFeedback |
Property to report still image detection.
(TX Mode) There is a sync at the selected input, and there is no motion within the image for more than 5 seconds
(RX Mode) There is a sync at the selected input or stream, that is feeding the output, and there is no motion within the image for more than 5 seconds
0 = No Sync (No source)
1 = Motion is detected, and Sync is present for currently selected input and stream
2 = Still image detected for Currently selected input or stream
The BaseEvent event will trigger with StillImageDetectionFeedbackEventId. | |
| StopFeedback |
Indicates the stream status.
'true' = Stream stopped; 'false' = Stream not stopped.
The BaseEvent event will trigger with StopEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with StopEventId when DmcStr card is connected to a Switch. The DMOutputChange event will trigger with StopEventId when Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle cards are connected to a Switch. (Inherited from DmcStrControl) | |
| StreamBitrateFeedback |
Reports the current stream bitrate.
The BaseEvent event will trigger with StreamBitrateEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with StreamBitrateEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with StreamBitrateEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| StreamingBuffer |
Property to set the amount of Video to be cached in milliseconds. Valid values are from 0 to 2500.
(Inherited from DmcStriControl) | |
| StreamingBufferFeedback |
Property to report the amount of Video cached in milliseconds.
The DMInputChange event will trigger with StreamingBufferEventId when DmcStr is connected to a Switch. The BaseEvent event will trigger with StreamingBufferEventId for DMCI Version of DmcStr or DmcStrCresnet or "DmTxRx100Str". (Inherited from DmcStriControl) | |
| StreamingTransportMode |
Property to set the Streaming Transport Mode. Valid values are 0-RTP and 1-MPEG2TS.
(Inherited from DmcStriControl) | |
| StreamingTransportModeFeedback |
Property to report the current Streaming Transport Mode.
The DMInputChange event will trigger with StreamingTransportModeEventId when DmcStr is connected to a Switch. The BaseEvent event will trigger with StreamingTransportModeEventId for DMCI Version of DmcStr or DmcStrCresnet or "DmTxRx100Str". (Inherited from DmcStriControl) | |
| StreamProfileFeedback |
Reports the currently selected profile.
The BaseEvent event will trigger with StreamProfileEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with StreamProfileEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with StreamProfileEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| Type |
Get the eDmStreamTypeDmcStrControl object represents.
(Inherited from DmcStrControl) | |
| UsbMode | Property to select the mode of the Icron device. If this property is not supported by the device then Local is returned. | |
| UsbModeFeedback |
Property to report the current mode of the Icron device. If this property is not supported by the device then Local is returned.
The BaseEvent event will trigger with UsbModeFeedbackEventId. | |
| UsbStatusFeedback |
Property to report any errors on the USB Link Status.
This property will return NA if not supported.
The BaseEvent event will trigger with UsbStatusFeedbackEventId. | |
| UserName |
Specifies the user name for the stream.
The user name can consist of up to 200 characters.
(Inherited from DmcStrControl) | |
| UserNameFeedback |
Text string that reports the user name used for the stream.
The BaseEvent event will trigger with UserNameEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with UserNameEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with UserNameEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from DmcStrControl) | |
| VideoSource |
Property to select the video source for the encoder / HDMI output.
This property will return the last value which was sent to the device and not what we got from the device.
This method is not supported by DMF-XX-4K-SFP,"DmNvxD30","DmNvxD30C","DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices.
(Inherited from DmfXx4kSfpControl) | |
| VideoSourceFeedback |
Property to report the active video source for DmfXx4kSfp.
Property to report the currently selected video source for "DmNvx350", "DmNvx351", "DmNvx350C" and "DmNvx351C".
This property is not supported by DMF-XX-4K-SFP,"DmNvxD30","DmNvxD30C","DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices.
The BaseEvent event will trigger with VideoSourceEventId. (Inherited from DmfXx4kSfpControl) |