Dm |
The DmTxRx100StrControl type exposes the following members.
| Name | Description | |
|---|---|---|
| AudioMutedFeedback |
Property to indicate that the audio is muted.
'true' = audio muted; 'false' = audio not muted.
The BaseEvent event will trigger with AudioMuteEventId. | |
| AudioUnmutedFeedback |
Property to indicate that the audio is unmuted.
'true' = audio unmuted; 'false' = audio not unmuted.
The BaseEvent event will trigger with AudioUnmuteEventId. | |
| Bass | Property to adjust the bass level. | |
| BassFeedback |
Property to return the current bass level.
The BaseEvent event will trigger with BassEventId. | |
| Card |
Get the card that this DmcStrControl is apart of.
This property will trigger DMOutputChange with DMOutputEventIds for Dmco70/Dmco73/Dmco74/Dmco75/Dmco76/Dmco77 and DmcStroSingle objects. This property will trigger DMInputChange with DMOutputEventIds for DmcStr/DmcStrCresnet and "DmTxRx100Str" objects. (Inherited from DmcStrControl) | |
| DecoderReadyFeedback |
Property to indicate that the Decoder is ready. Not supported by "DmTxRx100Str".
'true = Decoder ready; 'false' = Decoder not ready.
The DMInputChange event will trigger with DecoderReadyEventId when DmcStr is connected to a Switch. The BaseEvent event will trigger with DecoderReadyEventId for DMCI Version of DmcStr or DmcStrCresnet. (Inherited from DmcStriControl) | |
| DeviceMode | Property to set the device mode. | |
| DeviceModeFeedback |
Property to return the current device mode.
The BaseEvent event will trigger with DeviceModeFeedbackEventId. | |
| DeviceReadyFeedback |
Property to indicate that the device is ready to start streaming or preview video.
The BaseEvent event will trigger with DeviceReadyEventId. | |
| DisablePasswordProtectionFeedback |
Indicates the status of the password protection on the stream.
'true = Password disabled; 'false' = password enabled.
The BaseEvent event will trigger with PasswordProtectionDisabledEventId. | |
| ElapsedSecFeedback | Obsolete. Indicates the time elapsed (in seconds) since streaming was started. (Inherited from DmcStrControl) | |
| ElapsedSecondsFeedback |
Indicates the time elapsed (in seconds) since streaming was started.
The BaseEvent event will trigger with ElapsedSecEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with ElapsedSecEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with ElapsedSecEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. This property is no longer supported by "DmNvx350", "DmNvx351", "DmNvx350C" and "DmNvx351C" from the device firmware version 1.3626.00020 onwards.(Inherited from DmcStrControl) | |
| EnablePasswordProtectionFeedback |
Indicates the status of the password protection on the stream.
'true' = Password enabled; 'false' = password disabled.
The BaseEvent event will trigger with PasswordProtectionEnabledEventId. | |
| EncodingFramerate | Property to set the encoding framerate. | |
| EncodingFramerateFeedback |
Property to return the current encoding framerate.
The BaseEvent event will trigger with EncodingFramerateFeedbackEventId. | |
| EncodingResolution | Property to set the encoding resolution. | |
| EncodingResolutionFeedback |
Property to return the current encoding resolution.
The BaseEvent event will trigger with EncodingResolutionFeedbackEventId. | |
| InitiatorAddressFeedback |
Property to return the Initiator Address.
The DMInputChange event will trigger with InitiatorAddressEventId when DmcStr is connected to a Switch. The BaseEvent event will trigger with InitiatorAddressEventId for DMCI Version of DmcStr or DmcStrCresnet or "DmTxRx100Str". (Inherited from DmcStriControl) | |
| InputOutput |
The Input/Output card that this DmcStrControl is a part of.
(Inherited from DmcStrControl) | |
| MulticastAddress |
Specifies the multicast address to which the card will try to stream if SessionInitiation = MulticastViaRTSP.
This property is not supported by "DmNvxE30", "DmNvxE30C", "DmNvxE31" and "DmNvxE31C" devices.
(Inherited from DmcStrControl) | |
| MulticastAddressFeedback |
Indicates the multicast address to which the card is streaming if SessionInitiation = MulticastViaRTSP.
The BaseEvent event will trigger with MulticastAddressEventId for DMCI Version of DmcStr, for DmcStrCresnet, for "DmTxRx100Str", or for "DmNvxBaseClass". The DMInputChange event will trigger with MulticastAddressEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with MulticastAddressEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| OnlineFeedback |
Indicates whether the card is online or offline; that is, whether it is running properly (responding to polls) on the internal network.
The output will remain 'true' for as long as the card is online.
'true = Card online (running); 'false' = Card offline (not running)
This property is applicable only when the DM Card is connected to a Switch.
The DMInputChange event will trigger with OnlineFeedbackEventId. (Inherited from DmcStriControl) | |
| Parent |
The parent that a given object was added to.
(Inherited from DmcStrControl) | |
| Parent2 |
Set to the second parent if a given object has more than one parent.
(Inherited from DmcStrControl) | |
| Password |
Sets the password for the stream.
The password can consist of up to 200 characters.
(Inherited from DmcStrControl) | |
| PasswordFeedback |
Text string that reports the password used for the stream.
The BaseEvent event will trigger with PasswordEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with PasswordEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with PasswordEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| PauseFeedback |
Indicates that the stream is paused.
The output remains 'true' for as long as the stream is paused.
This property is not supported by "DmNvxD30", "DmNvxD30C", "DmNvx350", "DmNvx350C", "DmNvx351", "DmNvx351C", "DmNvxD30", "DmNvxD30C", "DmNvxE30", "DmNvxE30C", "DmNvxE31" and "DmNvxE31C" devices.
The BaseEvent event will trigger with PauseEventId for "DmTxRx100Str" and for DMCI version of DmcStr. The DMInputChange event will trigger with PauseEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with PauseEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| PresentFeedback |
Indicates whether the card is physically plugged into the card slot on the Switch.
The output will remain 'true' for as long as the card is detected.
'true = Card present; 'false' = Card not installed.
This property is applicable only when the DM Card is connected to a Switcher.
The DMInputChange event will trigger with PresentFeedbackEventId. (Inherited from DmcStriControl) | |
| ProcessingFeedback |
Property to indicate the processing status.
'true = Processing in progress; 'false' = Processing not in progress.
The DMInputChange event will trigger with ProcessingEventId when DmcStr is connected to a Switch. The BaseEvent event will trigger with ProcessingEventId for DMCI Version of DmcStr, or DmcStrCresnet, or "DmTxRx100Str". (Inherited from DmcStriControl) | |
| ServerUrl |
Property to set the Server URL. Setting this property will set the StreamLocation property of the "DmNvxBaseClass".
This property is not supported by "DmNvxE30" and "DmNvxE30C" devices.
(Inherited from DmcStriControl) | |
| ServerUrlFeedback |
Property to return the current Server URL. Reading this property returns the StreamLocation property of the "DmNvxBaseClass".
The DMInputChange event will trigger with ServerUrlEventId when DmcStr is connected to a Switch. The BaseEvent event will trigger with ServerUrlEventId for DMCI Version of DmcStr or DmcStrCresnet or "DmTxRx100Str". (Inherited from DmcStriControl) | |
| SessionInitiation |
Specifies the session initiation status
(Inherited from DmcStrControl) | |
| SessionInitiationFeedback |
Reports the current session initiation status
The BaseEvent event will trigger with SessionInitiationEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with SessionInitiationEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with SessionInitiationEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| StartFeedback |
Indicates if streaming has started.
'true' = Streaming started; 'false' = Streaming has not started.
The BaseEvent event will trigger with StartEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str".Switch. The DMInputChange event will trigger with StartEventId when DmcStr card is connected to a Switch. The DMOutputChange event will trigger with StartEventId when Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle cards are connected to a Switch. (Inherited from DmcStrControl) | |
| StatusFeedback |
Property to report the streaming status.
The DMInputChange event will trigger with StatusEventId when DmcStr is connected to a Switch. The BaseEvent event will trigger with StatusEventId for DMCI Version of DmcStr or DmcStrCresnet or "DmTxRx100Str". (Inherited from DmcStriControl) | |
| StatusTextFeedback |
Property to return the status text.
The DMInputChange event will trigger with StatusTextEventId when DmcStr is connected to a Switch. The BaseEvent event will trigger with StatusTextEventId for DMCI Version of DmcStr or DmcStrCresnet or "DmTxRx100Str". (Inherited from DmcStriControl) | |
| StopFeedback |
Indicates the stream status.
'true' = Stream stopped; 'false' = Stream not stopped.
The BaseEvent event will trigger with StopEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with StopEventId when DmcStr card is connected to a Switch. The DMOutputChange event will trigger with StopEventId when Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle cards are connected to a Switch. (Inherited from DmcStrControl) | |
| StreamBitrate | Property to set the stream bitrate. | |
| StreamBitrateFeedback |
Reports the current stream bitrate.
The BaseEvent event will trigger with StreamBitrateEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with StreamBitrateEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with StreamBitrateEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| StreamingBuffer |
Property to set the amount of Video to be cached in milliseconds. Valid values are from 0 to 2500.
(Inherited from DmcStriControl) | |
| StreamingBufferFeedback |
Property to report the amount of Video cached in milliseconds.
The DMInputChange event will trigger with StreamingBufferEventId when DmcStr is connected to a Switch. The BaseEvent event will trigger with StreamingBufferEventId for DMCI Version of DmcStr or DmcStrCresnet or "DmTxRx100Str". (Inherited from DmcStriControl) | |
| StreamingTransportMode |
Property to set the Streaming Transport Mode. Valid values are 0-RTP and 1-MPEG2TS.
(Inherited from DmcStriControl) | |
| StreamingTransportModeFeedback |
Property to report the current Streaming Transport Mode.
The DMInputChange event will trigger with StreamingTransportModeEventId when DmcStr is connected to a Switch. The BaseEvent event will trigger with StreamingTransportModeEventId for DMCI Version of DmcStr or DmcStrCresnet or "DmTxRx100Str". (Inherited from DmcStriControl) | |
| StreamProfile | Property to set the stream profile. | |
| StreamProfileFeedback |
Reports the currently selected profile.
The BaseEvent event will trigger with StreamProfileEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with StreamProfileEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with StreamProfileEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| Treble | Property to adjust the treble level. | |
| TrebleFeedback |
Property to return the current treble level.
The BaseEvent event will trigger with TrebleEventId. | |
| Type |
Get the eDmStreamTypeDmcStrControl object represents.
(Inherited from DmcStrControl) | |
| UserName |
Specifies the user name for the stream.
The user name can consist of up to 200 characters.
(Inherited from DmcStrControl) | |
| UserNameFeedback |
Text string that reports the user name used for the stream.
The BaseEvent event will trigger with UserNameEventId for DMCI Version of DmcStr or for DmcStrCresnet or for "DmTxRx100Str". The DMInputChange event will trigger with UserNameEventId for DmcStr when the card is connected to a Switch. The DMOutputChange event will trigger with UserNameEventId for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle when these cards are connected to a Switch. (Inherited from DmcStrControl) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from DmcStrControl) | |
| Volume | Property to set the source volume. | |
| VolumeFeedback |
Property to return the current source volume.
The BaseEvent event will trigger with VolumeEventId. |