Click or drag to resize

ClwLDimLoad Properties

The ClwLDimLoad type exposes the following members.

Properties
 NameDescription
Public propertyCycleDim Toggles between a raise and lower operation as follows: If load is Off or at the Min level, the load will raise. If load is at the Max level, the load will lower. At any other level, the load will change in the opposite direction of the last ramp (see raise/lower descriptions).
(Inherited from LDimmingLoad)
Public propertyDeviceLoadIsOn Property to Get the lighting device this load is on.
(Inherited from DimmingLoad)
Public propertyIsOn Indicates that the load is on at any level.
(Inherited from LDimmingLoad)
Public propertyLevel Property to set the level of the load.
(Inherited from DimmingLoad)
Public propertyLevelFeedback Property to get the level of the load when it changes due to a local buttons press, or a input such as Raise or Lower. This will not change in response to a value being set by the Level property.
(Inherited from DimmingLoad)
Public propertyLoadIsAttached Indicates that a physical load is attached. This property is not supported by the Horizon Dimmers HzBaseDimmingLoad and will always return true.
Public propertyLower Smoothly lowers the light level from its current level to the min level for as long as the property is set 'true'. The ramping operation continues until the light reaches the min level or until the property is set 'false'.
(Inherited from LDimmingLoad)
Public propertyNonDimmingModeFeedback Indicates that the unit has been set to non-dim mode.
Public propertyNumber Number of this load.
(Inherited from DimmingLoad)
Public propertyParameterMaxLevel Set the maximum dim level for full on and raise operations.

Valid values range from 55% to 100%. Default of 100%.

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.

Public propertyParameterMinLevel Set the minimum dim level for the lower operations.

Valid values range from 0% to 45%. Default of 0%.

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.

Public propertyParent The parent that a this load is added to.
(Inherited from LightLoad)
Public propertyPresets Collection of the presets available on this load. This property is not supported by "ClsC6", "ClsC6M", Horizon dimmers, "ZumNetJBoxDaliGroups" and all ZUM devices with loads.
(Inherited from DimmingLoad)
Public propertyRaise Smoothly raises the light level from its current level to 100% (max level) for as long as the property is set 'true'. The ramping operation continues until the light reaches 100% (max level) or until the property is set 'false'.
(Inherited from LDimmingLoad)
Public propertyType Type of load this object represents.
(Inherited from DimmingLoad)
Public propertyUserSpecifiedObject Object holder for any use by the programmer.
(Inherited from LightLoad)
Top
See Also