Hd |
The HdRxu4kzXxxEndpointHdmiOutput type exposes the following members.
| Name | Description | |
|---|---|---|
| AudioChannelsFeedback |
Reports the number of audio channels detected on the stream.
This property will trigger OutputStreamChange event with AudioChannelsFeedbackEventId. | |
| AudioFormatFeedback |
Reports the detected audio format accompanying the stream.
If this property is not supported then NoAudio will be returned.
This property will trigger OutputStreamChange event with AudioFormatFeedbackEventId. | |
| AutomaticPowerSettingsDisabledFeedback |
Property to indicate that the automatic power settings timeout is disabled. This property is only used by AVF, all other controls for ADP is done through the Web UI.
The OutputStreamChange event will trigger with AutomaticPowerSettingDisabledEventId. | |
| AutomaticPowerSettingsEnabledFeedback |
Property to indicate that the automatic power settings timeout is enabled. This property is only used by AVF, all other controls for ADP is done through the Web UI.
The OutputStreamChange event will trigger with AutomaticPowerSettingEnabledEventId. | |
| BlankDisabledFeedback |
Indicates that the video is unblanked.
The OutputStreamChange event will trigger with BlankDisabledFeedbackEventId | |
| BlankEnabledFeedback |
Indicates that the video is blanked.
The OutputStreamChange event will trigger with BlankEnabledFeedbackEventId | |
| ConnectedDevice |
Information about the device connected to this stream.
This property is supported by "DmRmc4kz100C".
Feedbacks for this property will trigger the DeviceInformationChange event. (Inherited from EndpointHdmiOutput) | |
| DisabledByHdcpFeedback |
Indicates that the stream has been disabled as the result of a failure during HDCP authentication.
This occurs when HDCP (High-bandwidth Digital Content Protection) is detected at the input, but the display or other loopback device is not HDCP compliant.
This also occurs when the maximum number of display devices that can be used with the video source (based on the application of keys and KSVs) has been exceeded.
This property will trigger OutputStreamChange event with DisabledByHdcpFeedbackEventId. (Inherited from EndpointHdmiOutput) | |
| Endpoint |
Endpoint device this output stream is a part of.
(Inherited from EndpointOutputStream) | |
| HdcpTransmitterMode |
Sets the HDCP Transmitter Mode.
If this property is not supported an error message will be logged.
(Inherited from EndpointHdmiOutput) | |
| HdcpTransmitterModeFeedback |
Reports the HDCP Transmitter Mode.
If this property is not supported "eHdcpTransmitterMode.NotSupported" shall be returned.
The OutputStreamChange event will trigger for with HdcpTransmitterModeFeedbackEventId. (Inherited from EndpointHdmiOutput) | |
| HotplugDetectedFeedback |
Property to indicate if a hot plug is detected (when true)
The OutputStreamChange event will trigger with HotplugDetectedEventId | |
| InputPrioritiesFeedback |
Property to return the current input priorities for this output in an array.
Number of inputs are from 1 to 4 and depends on the device type and the valid priority values are from 0 to 9.
To access input 2 use priority follow the below logic...
byte[] inputPiorities = InputPrioritiesFeedback;
inputPiorities[2 - 1] returns the priority of the input 2.
The OutputStreamChange event will trigger with InputPrioritiesFeedbackEventId. | |
| MuteFeedback |
Property to indicate if output is muted.
The OutputStreamChange event will trigger with AudioMuteFeedbackEventId | |
| Name | Property to set the HDMI Output port name. | |
| NameFeedback |
Property that returns the HDMI Output port name.
The BaseEvent event will trigger with "EndpointReceiverBase.HdmiOutNameFeedbackEventId". | |
| OccupancyDetectedFeedback |
Property to indicate if occupancy is detected, valid when occupancy detect source is control system.
true: occupancy detected; false: occupancy not detected
The OutputStreamChange event will trigger with OccupancyDetectedEventId. | |
| Output3DStatus |
Indicates the 3D status of the video stream.
This property will trigger OutputStreamChange event with Output3DStatusEventId. (Inherited from EndpointHdmiOutput) | |
| OutputDisabledFeedback |
Property to indicate if output is disabled.
The OutputStreamChange event will trigger with OutputDisabledEventId | |
| OutputEnabledFeedback |
Property to indicate if output is enabled.
The OutputStreamChange event will trigger with OutputEnabledEventId | |
| SinkHdcpCapabilityFeedback |
Property to report the downstream sink/display HDCP version.
The OutputStreamChange event will trigger with SinkHdcpCapabilityFeedbackEventId. | |
| StreamCec |
CEC information sent and received by the HDMI port.
Feedbacks for this property will trigger the CecChange event. (Inherited from EndpointHdmiOutput) | |
| StreamType |
Get the type of stream this object represents.
(Inherited from EndpointOutputStream) | |
| TransmittingFeedback |
This property value is true when transmitting HDMI Output video signal and HotplugDetectedFeedback is true.
The OutputStreamChange event will trigger with TransmittingFeedbackEventId. | |
| UnmuteFeedback |
Property to indicate if output is unmuted.
The OutputStreamChange event will trigger with AudioUnmuteFeedbackEventId | |
| VacancyDetectedFeedback |
Property to indicate if vacancy is detected, valid when vacancy detect source is control system.
true: vancancy detected; false: vacancy not detected
The OutputStreamChange event will trigger with VacancyDetectedEventId. | |
| VideoAttributes |
VideoAttributes for output
This property will trigger AttributeChange event with VideoAttributeEventIds. | |
| VideoOut | Selects the video source to route to the video output, when video routing is enabled. If this property is not supported then NoSource will be returned. | |
| VideoOutFeedback |
Property to report the current video source to route to the video output device.
The BaseEvent event will trigger with "EndpointReceiverBase.VideoOutEventId". |