Click or drag to resize

HdRxu4kzXxxEndpointHdmiOutput Class

Class for HD-RXU-4KZ-XXX HDMI Output.

This class will trigger OutputStreamChange, AttributeChange, DeviceInformationChange and CecChange events.

Inheritance Hierarchy
SystemObject
  Crestron.SimplSharpPro.DM.EndpointsEndpointOutputStream
    Crestron.SimplSharpPro.DM.EndpointsEndpointHdmiOutput
      Crestron.SimplSharpPro.DM.EndpointsHdRxu4kzXxxEndpointHdmiOutput

Namespace: Crestron.SimplSharpPro.DM.Endpoints
Assembly: SimplSharpPro (in SimplSharpPro.dll) Version: 2.21.121
Syntax
C#
public class HdRxu4kzXxxEndpointHdmiOutput : EndpointHdmiOutput, 
	IVideoAttributesEnhanced, IDMAudioInformation, ITxRxuEndpointOutputCommonProperties

The HdRxu4kzXxxEndpointHdmiOutput type exposes the following members.

Properties
 NameDescription
Public propertyAudioChannelsFeedback Reports the number of audio channels detected on the stream.

This property will trigger OutputStreamChange event with AudioChannelsFeedbackEventId.

Public propertyAudioFormatFeedback Reports the detected audio format accompanying the stream. If this property is not supported then NoAudio will be returned.

This property will trigger OutputStreamChange event with AudioFormatFeedbackEventId.

Public propertyAutomaticPowerSettingsDisabledFeedback Property to indicate that the automatic power settings timeout is disabled. This property is only used by AVF, all other controls for ADP is done through the Web UI.

The OutputStreamChange event will trigger with AutomaticPowerSettingDisabledEventId.

Public propertyAutomaticPowerSettingsEnabledFeedback Property to indicate that the automatic power settings timeout is enabled. This property is only used by AVF, all other controls for ADP is done through the Web UI.

The OutputStreamChange event will trigger with AutomaticPowerSettingEnabledEventId.

Public propertyBlankDisabledFeedback Indicates that the video is unblanked.

The OutputStreamChange event will trigger with BlankDisabledFeedbackEventId

Public propertyBlankEnabledFeedback Indicates that the video is blanked.

The OutputStreamChange event will trigger with BlankEnabledFeedbackEventId

Public propertyConnectedDevice Information about the device connected to this stream. This property is supported by "DmRmc4kz100C".

Feedbacks for this property will trigger the DeviceInformationChange event.


(Inherited from EndpointHdmiOutput)
Public propertyDisabledByHdcpFeedback Indicates that the stream has been disabled as the result of a failure during HDCP authentication. This occurs when HDCP (High-bandwidth Digital Content Protection) is detected at the input, but the display or other loopback device is not HDCP compliant. This also occurs when the maximum number of display devices that can be used with the video source (based on the application of keys and KSVs) has been exceeded.

This property will trigger OutputStreamChange event with DisabledByHdcpFeedbackEventId.


(Inherited from EndpointHdmiOutput)
Public propertyEndpoint Endpoint device this output stream is a part of.
(Inherited from EndpointOutputStream)
Public propertyHdcpTransmitterMode Sets the HDCP Transmitter Mode. If this property is not supported an error message will be logged.
(Inherited from EndpointHdmiOutput)
Public propertyHdcpTransmitterModeFeedback Reports the HDCP Transmitter Mode. If this property is not supported "eHdcpTransmitterMode.NotSupported" shall be returned.

The OutputStreamChange event will trigger for with HdcpTransmitterModeFeedbackEventId.


(Inherited from EndpointHdmiOutput)
Public propertyHotplugDetectedFeedback Property to indicate if a hot plug is detected (when true)

The OutputStreamChange event will trigger with HotplugDetectedEventId

Public propertyInputPrioritiesFeedback Property to return the current input priorities for this output in an array. Number of inputs are from 1 to 4 and depends on the device type and the valid priority values are from 0 to 9. To access input 2 use priority follow the below logic... byte[] inputPiorities = InputPrioritiesFeedback; inputPiorities[2 - 1] returns the priority of the input 2.

The OutputStreamChange event will trigger with InputPrioritiesFeedbackEventId.

Public propertyMuteFeedback Property to indicate if output is muted.

The OutputStreamChange event will trigger with AudioMuteFeedbackEventId

Public propertyName Property to set the HDMI Output port name.
Public propertyNameFeedback Property that returns the HDMI Output port name.

The BaseEvent event will trigger with "EndpointReceiverBase.HdmiOutNameFeedbackEventId".

Public propertyOccupancyDetectedFeedback Property to indicate if occupancy is detected, valid when occupancy detect source is control system. true: occupancy detected; false: occupancy not detected

The OutputStreamChange event will trigger with OccupancyDetectedEventId.

Public propertyOutput3DStatus Indicates the 3D status of the video stream.

This property will trigger OutputStreamChange event with Output3DStatusEventId.


(Inherited from EndpointHdmiOutput)
Public propertyOutputDisabledFeedback Property to indicate if output is disabled.

The OutputStreamChange event will trigger with OutputDisabledEventId

Public propertyOutputEnabledFeedback Property to indicate if output is enabled.

The OutputStreamChange event will trigger with OutputEnabledEventId

Public propertySinkHdcpCapabilityFeedback Property to report the downstream sink/display HDCP version.

The OutputStreamChange event will trigger with SinkHdcpCapabilityFeedbackEventId.

Public propertyStreamCec CEC information sent and received by the HDMI port.

Feedbacks for this property will trigger the CecChange event.


(Inherited from EndpointHdmiOutput)
Public propertyStreamType Get the type of stream this object represents.
(Inherited from EndpointOutputStream)
Public propertyTransmittingFeedback This property value is true when transmitting HDMI Output video signal and HotplugDetectedFeedback is true.

The OutputStreamChange event will trigger with TransmittingFeedbackEventId.

Public propertyUnmuteFeedback Property to indicate if output is unmuted.

The OutputStreamChange event will trigger with AudioUnmuteFeedbackEventId

Public propertyVacancyDetectedFeedback Property to indicate if vacancy is detected, valid when vacancy detect source is control system. true: vancancy detected; false: vacancy not detected

The OutputStreamChange event will trigger with VacancyDetectedEventId.

Public propertyVideoAttributes VideoAttributes for output

This property will trigger AttributeChange event with VideoAttributeEventIds.

Public propertyVideoOut Selects the video source to route to the video output, when video routing is enabled. If this property is not supported then NoSource will be returned.
Public propertyVideoOutFeedback Property to report the current video source to route to the video output device.

The BaseEvent event will trigger with "EndpointReceiverBase.VideoOutEventId".

Top
Methods
 NameDescription
Public methodDetectOccupancy Method to detect occupancy, valid when occupancy detect source is control system.
Public methodDetectVacancy Method to detect vacancy, valid when vacancy detect source is control system.
Public methodDisableAutomaticPowerSettings Method to disable the automatic power settings timeout. This method is only used by AVF, all other controls for ADP is done through the Web UI.
Public methodDisableBlank Method to unblank the output.
Public methodDisableOutput Method to disable output.
Public methodEnableAutomaticPowerSettings Method to enable the automatic power settings timeout. This method is only used by AVF, all other controls for ADP is done through the Web UI.
Public methodEnableBlank Method to blank the output.
Public methodEnableOutput Method to enable output.
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Protected methodFinalizeAllows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.
(Inherited from Object)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Public methodInputPriorities Method to set the input priorities for this output. Input Priorities are based on number of inputs. Example : if a device has 4 inputs and 2 outputs then the priority serial = byte[]{0,1,2,0} means Input 1 = Not used Input 2 = Priority 1 Input 3 = Priority 2 Input 4 = Not used
Protected methodMemberwiseCloneCreates a shallow copy of the current Object.
(Inherited from Object)
Public methodMute Method to mute output.
Public methodToString Return a string representing this input stream's location.
(Inherited from EndpointOutputStream)
Public methodUnmute Method to unmute output.
Top
Events
 NameDescription
Public eventOutputStreamChange Event fired when one of the feedbacks have changed for this output stream. EventIds for this event are located in the EndpointOutputStreamEventIds class.
(Inherited from EndpointOutputStream)
Top

Version Information

.NET

Supported in: 6.0

.NET Compact Framework

Supported in: 3.5
See Also