Click or drag to resize

VpgGlassReservedSigs Properties

The VpgGlassReservedSigs type exposes the following members.

Properties
 NameDescription
Public propertyAudioBeepOffFeedback Property to report that the beep audio is disabled.

The output remains true for as long as the audio is off.

Public propertyAudioBeepOnFeedback Property to report that the beep audio is enabled.

The output remains true for as long as the audio is on.

Public propertyAudioBeepVolume Property to set the beep audio volume.

Sets the corresponding volume level from 0% (0d) to 100% (65535d).

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyAudioBeepVolumeDown Lowers the audio beep volume by 1% with each pulse.

If the input remains true for 0.5 seconds the volume will auto-decrement until the input goes false or until the volume reaches 0%.

Public propertyAudioBeepVolumeFeedback Property to report the beep audio volume level.
Public propertyAudioBeepVolumeUp Raises the audio beep volume by 1% with each pulse.

If the input remains true for 0.5 seconds the volume will auto-increment until the input goes false or until the maximum volume is reached.

Public propertyAudioHdmiOffFeedback Property to report that the HDMI audio is disabled.

The output remains true for as long as the audio is off.

Public propertyAudioHdmiOnFeedback Property to report that the HDMI audio is enabled.

The output remains true for as long as the HDMI audio is on.

Public propertyAudioHdmiVolume Property to set the HDMI audio volume level from 0% (0d) to 100% (65535d). Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyAudioHdmiVolumeDown Lowers the HDMI audio volume by 1% with each pulse of the input.

If the input remains true for 0.5 seconds the volume will auto-decrement until the input goes false or until the volume reaches 0%.

Public propertyAudioHdmiVolumeFeedback Property to report the HDMI audio volume level.
Public propertyAudioHdmiVolumeUp Raises the HDMI audio volume by 1% with each a pulse of the input.

If the input remains true for 0.5 seconds the volume will auto-increment until the input goes false or until the maximum volume is reached.

The final volume is also affected by the master volume controls.
Public propertyAudioLineOffFeedback Property to report that the line audio is disabled.

The output remains true for as long as the audio is off.

Public propertyAudioLineOnFeedback Property to report that the line audio is enabled.

The output remains true for as long as the audio is on.

Public propertyAudioLineVolume Property to set the line audio volume.

Sets the corresponding volume level from 0% (0d) to 100% (65535d).

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyAudioLineVolumeDown Lowers the line audio volume by 1% with each pulse.

If the input remains true for 0.5 seconds the volume will auto-decrement until the input goes false or until the volume reaches 0%.

The final volume is also affected by the master volume controls.
Public propertyAudioLineVolumeFeedback Property to report the line audio volume level.
Public propertyAudioLineVolumeUp Raises the line audio volume by 1% with each pulse.

If the input remains true for 0.5 seconds the volume will auto-increment until the input goes false or until the maximum volume is reached.

The final volume is also affected by the master volume controls.
Public propertyAudioMasterOffFeedback Property to report that the master audio is off.

The output remains true for as long as the master audio is disabled.

Public propertyAudioMasterOnFeedback Property to report that the master audio is on.

The output remains true for as long as the master audio is enabled.

Public propertyAudioMasterVolume Property to set the master audio volume.

Sets the corresponding volume level from 0% (0d) to 100% (65535d).

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyAudioMasterVolumeDown Lower the overall audio volume by 1% with each pulse.

If the input remains true for 0.5 seconds the volume will auto-decrement until the input goes false or until the volume reaches 0%.

Public propertyAudioMasterVolumeFeedback Property to report the master audio volume level.
Public propertyAudioMasterVolumeUp Raises the overall audio volume by 1% with each pulse.

If the input remains true for 0.5 seconds the volume will auto-increment until the input goes false or until the maximum volume is reached.

Public propertyAudioMicOffFeedback Property to report that the Mic audio is disabled.

The output remains true for as long as the audio is off.

Public propertyAudioMicOnFeedback Property to report that the Mic audio is enabled.

The output remains true for as long as the audio is on.

Public propertyAudioMicVolume Property to set the Mic audio volume.

Sets the corresponding volume level from 0% (0d) to 100% (65535d).

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyAudioMicVolumeDown Lowers the Mic audio volume by 1% with each pulse. The input has no effect once the volume reaches 0%.

If the input remains true for 0.5 seconds the volume will auto-decrement until the input goes false or until the volume reaches 0%.

The final volume is also affected by the master volume controls.
Public propertyAudioMicVolumeFeedback Property to report the Mic audio volume level.
Public propertyAudioMicVolumeUp Raises the Mic audio volume by 1% with each pulse. The input has no effect once the volume reaches 100%.

If the input remains true for 0.5 seconds the volume will auto-increment until the input goes false or until the maximum volume is reached.

The final volume is also affected by the master volume controls.
Public propertyAudioWavOffFeedback Property to report that the WAV audio is disabled.

The output remains true for as long as the audio is off.

Public propertyAudioWavOnFeedback Property to report that the WAV audio is enabled.

The output remains true for as long as the audio is on.

Public propertyAudioWavVolume Property to set the WAV audio volume.

Sets the corresponding volume level from 0% (0d) to 100% (65535d).

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyAudioWavVolumeDown Lowers the WAV audio volume by 1% with each pulse. The input has no effect once the volume reaches 0%.

If the input remains true for 0.5 seconds the volume will auto-decrement until the input goes false or until the volume reaches 0%.

The final volume is also affected by the master volume controls.
Public propertyAudioWavVolumeFeedback Property to report the WAV audio volume level.
Public propertyAudioWavVolumeUp Raises the WAV audio volume by 1% with each pulse. The input has no effect once the volume reaches 100%.

If the input remains true for 0.5 seconds the volume will auto-increment until the input goes false or until the maximum volume is reached.

The final volume is also affected by the master volume controls.
Protected propertyBooleanInput Bool Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyBooleanOutput Bool Outputs on the device extender.
(Inherited from DeviceExtender)
Public propertyHidUseAlternate Property to select the destination Alternate where HID data will be sent. The selection will be active for as long as the input is true.

If both UseDmNetForHid and HidUseAlternate inputs are high, the DM Net address takes precedence.

HID data includes touch output data, and, if HidUseKm = false, keyboard/mouse data.

When set to "Alternate", the HID data will be routed to the alternate address specified by UsbAlternateHidControl

Public propertyHidUseAlternateFeedback Property to report the current HID destination set to Alternate.

The output remains true for as long as the destination address is active.

Public propertyHidUseKm Property to select the destination where keyboard/mouse (KM) data will be sent, as follows:

When the input is true, the KM data will be sent to the address specified by UsbKmHidControl. This will break out the KM data to the VMK-WIN.

When the input is false, the KM data will be sent to the "DM Net" address (when UseDmNetForHidFeedback = true) or the "Alternate" address (when HidUseAlternateFeedback= true).

Public propertyHidUseKmFeedback Property to report the current HID keyboard/mouse setting.

The output remains true for as long as the setting is selected.

true = Breakaway destination selected; false = DM Net or Alternate destination selected.

Public propertyLcdBrightness Property to set the LCD brightness.

Sets the LCD brightness level from 0% (0d) to 100% (65535d).

Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyLcdBrightnessDown Lowers the LCD backlight brightness by 1% with each pulse.

If the input remains true for 0.5 seconds, the LCD backlight brightness will auto-decrement until the input goes false or until it reaches the minimum value of 0%.

Public propertyLcdBrightnessFeedback Property to report the LCD brightness level.
Public propertyLcdBrightnessUp Raises the LCD backlight brightness by 1% with each pulse.

If the input remains true for 0.5 seconds, the LCD backlight brightness will auto-increment until the input goes false or until it reaches the maximum value of 100%.

Public propertyRebootButtonHeldFeedback Property to report the hardkey on the V-Panel is being pressed.

The output remains true for the duration of the button press.

Public propertyRebootRequestedFeedback Property to report that the hardkey on the V-Panel has been pressed for 5 seconds, thereby requesting a reboot of the V-Panel.

The output will pulse when the reboot request is received.

Public propertyScaleTouch Property to set the V-Panel's touch coordinates to the full range of analog values (0d to 65535d) for as long as the input is true. In this mode 0d,0d represents the top, left corner and 65535d,65535d represents the bottom, right corner.

When the input is false, the V-Panel's screen resolution coordinates are used, i.e., 800x600 or 1280x768.

This input should only be set true if touch output data is being broken out to the VMK-WIN (HidUseKmFeedback=true).

true (level sensitive) = Use absolute touch coordinates (VMK-WIN); false = Use screen resolution.
Public propertyScaleTouchFeedback Property to report the current scale touch setting.

The output remains true for as long as the VMK-WIN coordinates are active.

Public propertySourceDigitalDisabledDueToResolutionFeedback Property to report that the digital (HDMI) source has been disabled due to incompatible resolution with the V-Panel.

The VPG-12 supports 800x600 resolution; the VPG-15, 1280x768.

true = Video disabled; false = Resolution OK

Public propertySourceDigitalDisabledFeedback Property to report that the HDMI video is disabled.

The output remains true for as long as HDMI video is turned off.

Public propertySourceDigitalEnabledFeedback Property to report that the digital (HDMI) video is enabled.

The output remains true for as long as HDMI video is turned on.

Public propertySourceDigitalHdcpSourceFeedback Property to report the presence of HDCP, which requires compatible players and displays.

The output remains true for as long as HDCP is detected.

Public propertySourceDigitalNoInputFlagFeedback Property to report that there is no HDMI source being routed to the DM input of the V-Panel.

The output remains true for as long as no digital source is detected.

Public propertySourceDigitalSyncDetectedFeedback Property to report that video sync levels are detected at the DM input.

The output remains true for as long as sync is detected.

Public propertySourceVideoAnalogCableType Property to set the Source Video Analog Cable type.

0d = DM, 1d = CAT6, 2d = CAT5e

Use enum eVideoAnalogCableType to convert the ushort value to the source video analog cable type enum or vice versa. This value is used to determine the cable equalization. Invalid values are ignored.
Public propertySourceVideoAnalogCableTypeFeedback Property to report the cable type. Use enum eVideoAnalogCableType to convert the ushort value to source video analog cable type enum or vice versa. This value is used to determine the cable equalization. Invalid values are ignored.
Public propertySourceVideoAnalogLengthFeedback Property to report the length of the DM cable in meters.

Reported values will range from 0d to 254d (254m).

Public propertySourceVideoLockedStatusFeedback Property to report that the video image has been locked.

The output remains true for as long as the video is locked. When the output is false, this indicates no picture.

Public propertyStandbyTimeout Property to set the standby timeout (1d = 1 minute). The standby timeout is the period from the last use of the touchscreen before going into standby mode (screen display is off but power is on). Valid values range from 0d (no standby timeout) to 120d (120 minutes).
Public propertyStandbyTimeoutDown Decrements the standby timeout by one (1) minute with each pulse of the input.

If the input remains true for 0.5 seconds, the standby timeout period will auto-decrement until the input goes false or until it reaches 0 minutes (no standby timeout).

Public propertyStandbyTimeoutFeedback Property to report the standby timeout period (1d = 1 minute). Reported value range from 0d (no standby timeout) to 120d (120 minutes).
Public propertyStandbyTimeoutUp Increments the standby timeout by one (1) minute with each pulse of the input. The standby timeout is the period from the last use of the touchscreen before going into standby mode (screen display is off but power is on).

If the input remains true for 0.5 seconds, the standby timeout period will auto-increment until the input goes false or until it reaches the maximum value of 120 minutes.

Protected propertyStringInput String Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyStringOutput String Outputs on the device extender.
(Inherited from DeviceExtender)
Public propertyTouchCalibrationCompleteFeedback Property to report that the touch calibration procedure is complete (or has timed out).
Public propertyTouchCalibrationFailFeedback Property to report the result of the touch calibration procedure.

When "Fail" is true, this indicates that calibration failed.

The output remains true until the next pulse of TouchCalibrationStart.
Public propertyTouchCalibrationInProgressFeedback Property to report that the touch calibration procedure is in progress.

The output goes true on the rising edge of TouchCalibrationStart pulse and remain true for as long as the procedure is in progress.

Public propertyTouchCalibrationPassFeedback Property to report the result of the touch calibration procedure.

When "Pass" is true, this indicates that calibration was successful.

The output remains true until the next pulse of TouchCalibrationStart.
Public propertyTouchCalibrationPositionXFeedback Property to report the current X coordinates of the icon during touch calibration.
Public propertyTouchCalibrationPositionYFeedback Property to report the current Y coordinates of the icon during touch calibration.
Public propertyTouchCalibrationStartFeedback Property to report that touch calibration has been initiated.

The output remains true for as long as touch calibration is in progress.

Public propertyUsbAlternateHidControl Property to set the destination for HID data when the address is set to "Alternate" (UseDmNetForHidFeedback = true). This input should be connected to the corresponding HidSwitchCommandFeedback of the DVPHD System 2 Reserved Joins extender.
Public propertyUsbAlternateHidControlFeedback Property to report the current Alternate address.
Public propertyUsbDeviceDetectedFeedback Property to report a USB device detected at the USB HID port.

The output remains true for as long as the error is detected.

Public propertyUsbHidControl Property to set the destination for HID data when the address is set to "DM Net" (UseDmNetForHidFeedback = true). This input should be connected to the corresponding output HidSwitchCommandFeedback of the DVPHD System 2 Reserved Joins extender.
Public propertyUsbHidControlFeedback Property to report the current HID address.
Public propertyUsbKmHidControl Property to set the destination for HID data when the address is set to "KM" (HidUseKmFeedback = true). This address is used when the KM data is broken out to a VMK-WIN. This input should be connected to the corresponding output (UsbHidControl) of the VMK-WIN Configuration slot.
Public propertyUsbKmHidControlFeedback Property to report the current KM address.
Public propertyUseDmNetForHid Property to select the destination DM Net where HID data will be sent. The selection will be active for as long as the input is true.

If both UseDmNetForHid and HidUseAlternate inputs are high, the DM Net address takes precedence.

HID data includes touch output data, and, if HidUseKm = false, keyboard/mouse data.

When set to "DM Net", the HID data will be routed via DM Net to the address specified by UsbHidControl

.
Public propertyUseDmNetForHidFeedback Property to report the current HID destination set to DM Net.
Protected propertyUShortInput UShort Inputs on the device extender.
(Inherited from DeviceExtender)
Protected propertyUShortOutput UShort Outputs on the device extender.
(Inherited from DeviceExtender)
Top
See Also