Vpg |
public sealed class VpgGlassReservedSigs : DeviceExtender
The VpgGlassReservedSigs type exposes the following members.
| Name | Description | |
|---|---|---|
| AudioBeepOffFeedback |
Property to report that the beep audio is disabled.
The output remains true for as long as the audio is off. | |
| AudioBeepOnFeedback |
Property to report that the beep audio is enabled.
The output remains true for as long as the audio is on. | |
| AudioBeepVolume |
Property to set the beep audio volume.
Sets the corresponding volume level from 0% (0d) to 100% (65535d). Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| AudioBeepVolumeDown |
Lowers the audio beep volume by 1% with each pulse.
If the input remains true for 0.5 seconds the volume will auto-decrement until the input goes false or until the volume reaches 0%. | |
| AudioBeepVolumeFeedback | Property to report the beep audio volume level. | |
| AudioBeepVolumeUp |
Raises the audio beep volume by 1% with each pulse.
If the input remains true for 0.5 seconds the volume will auto-increment until the input goes false or until the maximum volume is reached. | |
| AudioHdmiOffFeedback |
Property to report that the HDMI audio is disabled.
The output remains true for as long as the audio is off. | |
| AudioHdmiOnFeedback |
Property to report that the HDMI audio is enabled.
The output remains true for as long as the HDMI audio is on. | |
| AudioHdmiVolume | Property to set the HDMI audio volume level from 0% (0d) to 100% (65535d). Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| AudioHdmiVolumeDown |
Lowers the HDMI audio volume by 1% with each pulse of the input.
If the input remains true for 0.5 seconds the volume will auto-decrement until the input goes false or until the volume reaches 0%. | |
| AudioHdmiVolumeFeedback | Property to report the HDMI audio volume level. | |
| AudioHdmiVolumeUp |
Raises the HDMI audio volume by 1% with each a pulse of the input.
If the input remains true for 0.5 seconds the volume will auto-increment until the input goes false or until the maximum volume is reached. The final volume is also affected by the master volume controls. | |
| AudioLineOffFeedback |
Property to report that the line audio is disabled.
The output remains true for as long as the audio is off. | |
| AudioLineOnFeedback |
Property to report that the line audio is enabled.
The output remains true for as long as the audio is on. | |
| AudioLineVolume |
Property to set the line audio volume.
Sets the corresponding volume level from 0% (0d) to 100% (65535d). Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| AudioLineVolumeDown |
Lowers the line audio volume by 1% with each pulse.
If the input remains true for 0.5 seconds the volume will auto-decrement until the input goes false or until the volume reaches 0%. The final volume is also affected by the master volume controls. | |
| AudioLineVolumeFeedback | Property to report the line audio volume level. | |
| AudioLineVolumeUp |
Raises the line audio volume by 1% with each pulse.
If the input remains true for 0.5 seconds the volume will auto-increment until the input goes false or until the maximum volume is reached. The final volume is also affected by the master volume controls. | |
| AudioMasterOffFeedback |
Property to report that the master audio is off.
The output remains true for as long as the master audio is disabled. | |
| AudioMasterOnFeedback |
Property to report that the master audio is on.
The output remains true for as long as the master audio is enabled. | |
| AudioMasterVolume |
Property to set the master audio volume.
Sets the corresponding volume level from 0% (0d) to 100% (65535d). Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| AudioMasterVolumeDown |
Lower the overall audio volume by 1% with each pulse.
If the input remains true for 0.5 seconds the volume will auto-decrement until the input goes false or until the volume reaches 0%. | |
| AudioMasterVolumeFeedback | Property to report the master audio volume level. | |
| AudioMasterVolumeUp |
Raises the overall audio volume by 1% with each pulse.
If the input remains true for 0.5 seconds the volume will auto-increment until the input goes false or until the maximum volume is reached. | |
| AudioMicOffFeedback |
Property to report that the Mic audio is disabled.
The output remains true for as long as the audio is off. | |
| AudioMicOnFeedback |
Property to report that the Mic audio is enabled.
The output remains true for as long as the audio is on. | |
| AudioMicVolume |
Property to set the Mic audio volume.
Sets the corresponding volume level from 0% (0d) to 100% (65535d). Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| AudioMicVolumeDown |
Lowers the Mic audio volume by 1% with each pulse.
The input has no effect once the volume reaches 0%.
If the input remains true for 0.5 seconds the volume will auto-decrement until the input goes false or until the volume reaches 0%. The final volume is also affected by the master volume controls. | |
| AudioMicVolumeFeedback | Property to report the Mic audio volume level. | |
| AudioMicVolumeUp |
Raises the Mic audio volume by 1% with each pulse.
The input has no effect once the volume reaches 100%.
If the input remains true for 0.5 seconds the volume will auto-increment until the input goes false or until the maximum volume is reached. The final volume is also affected by the master volume controls. | |
| AudioWavOffFeedback |
Property to report that the WAV audio is disabled.
The output remains true for as long as the audio is off. | |
| AudioWavOnFeedback |
Property to report that the WAV audio is enabled.
The output remains true for as long as the audio is on. | |
| AudioWavVolume |
Property to set the WAV audio volume.
Sets the corresponding volume level from 0% (0d) to 100% (65535d). Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| AudioWavVolumeDown |
Lowers the WAV audio volume by 1% with each pulse.
The input has no effect once the volume reaches 0%.
If the input remains true for 0.5 seconds the volume will auto-decrement until the input goes false or until the volume reaches 0%. The final volume is also affected by the master volume controls. | |
| AudioWavVolumeFeedback | Property to report the WAV audio volume level. | |
| AudioWavVolumeUp |
Raises the WAV audio volume by 1% with each pulse.
The input has no effect once the volume reaches 100%.
If the input remains true for 0.5 seconds the volume will auto-increment until the input goes false or until the maximum volume is reached. The final volume is also affected by the master volume controls. | |
| BooleanInput |
Bool Inputs on the device extender.
(Inherited from DeviceExtender) | |
| BooleanOutput |
Bool Outputs on the device extender.
(Inherited from DeviceExtender) | |
| HidUseAlternate |
Property to select the destination Alternate where HID data will be sent.
The selection will be active for as long as the input is true.
If both UseDmNetForHid and HidUseAlternate inputs are high, the DM Net address takes precedence. HID data includes touch output data, and, if HidUseKm = false, keyboard/mouse data.When set to "Alternate", the HID data will be routed to the alternate address specified by UsbAlternateHidControl | |
| HidUseAlternateFeedback |
Property to report the current HID destination set to Alternate.
The output remains true for as long as the destination address is active. | |
| HidUseKm |
Property to select the destination where keyboard/mouse (KM) data will be sent, as follows:
When the input is true, the KM data will be sent to the address specified by UsbKmHidControl. This will break out the KM data to the VMK-WIN. When the input is false, the KM data will be sent to the "DM Net" address (when UseDmNetForHidFeedback = true) or the "Alternate" address (when HidUseAlternateFeedback= true). | |
| HidUseKmFeedback |
Property to report the current HID keyboard/mouse setting.
The output remains true for as long as the setting is selected. true = Breakaway destination selected; false = DM Net or Alternate destination selected. | |
| LcdBrightness |
Property to set the LCD brightness.
Sets the LCD brightness level from 0% (0d) to 100% (65535d). Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage. | |
| LcdBrightnessDown |
Lowers the LCD backlight brightness by 1% with each pulse.
If the input remains true for 0.5 seconds, the LCD backlight brightness will auto-decrement until the input goes false or until it reaches the minimum value of 0%. | |
| LcdBrightnessFeedback | Property to report the LCD brightness level. | |
| LcdBrightnessUp |
Raises the LCD backlight brightness by 1% with each pulse.
If the input remains true for 0.5 seconds, the LCD backlight brightness will auto-increment until the input goes false or until it reaches the maximum value of 100%. | |
| RebootButtonHeldFeedback |
Property to report the hardkey on the V-Panel is being pressed.
The output remains true for the duration of the button press. | |
| RebootRequestedFeedback |
Property to report that the hardkey on the V-Panel has been pressed for 5 seconds,
thereby requesting a reboot of the V-Panel.
The output will pulse when the reboot request is received. | |
| ScaleTouch |
Property to set the V-Panel's touch coordinates to the full range of analog values
(0d to 65535d) for as long as the input is true. In this mode 0d,0d represents
the top, left corner and 65535d,65535d represents the bottom, right corner.
When the input is false, the V-Panel's screen resolution coordinates are used, i.e., 800x600 or 1280x768. This input should only be set true if touch output data is being broken out to the VMK-WIN (HidUseKmFeedback=true). true (level sensitive) = Use absolute touch coordinates (VMK-WIN); false = Use screen resolution. | |
| ScaleTouchFeedback |
Property to report the current scale touch setting.
The output remains true for as long as the VMK-WIN coordinates are active. | |
| SourceDigitalDisabledDueToResolutionFeedback |
Property to report that the digital (HDMI) source has been disabled due to
incompatible resolution with the V-Panel.
The VPG-12 supports 800x600 resolution; the VPG-15, 1280x768. true = Video disabled; false = Resolution OK | |
| SourceDigitalDisabledFeedback |
Property to report that the HDMI video is disabled.
The output remains true for as long as HDMI video is turned off. | |
| SourceDigitalEnabledFeedback |
Property to report that the digital (HDMI) video is enabled.
The output remains true for as long as HDMI video is turned on. | |
| SourceDigitalHdcpSourceFeedback |
Property to report the presence of HDCP, which requires compatible players and displays.
The output remains true for as long as HDCP is detected. | |
| SourceDigitalNoInputFlagFeedback |
Property to report that there is no HDMI source being routed to the DM input of the V-Panel.
The output remains true for as long as no digital source is detected. | |
| SourceDigitalSyncDetectedFeedback |
Property to report that video sync levels are detected at the DM input.
The output remains true for as long as sync is detected. | |
| SourceVideoAnalogCableType |
Property to set the Source Video Analog Cable type.
0d = DM, 1d = CAT6, 2d = CAT5e Use enum eVideoAnalogCableType to convert the ushort value to the source video analog cable type enum or vice versa. This value is used to determine the cable equalization. Invalid values are ignored. | |
| SourceVideoAnalogCableTypeFeedback | Property to report the cable type. Use enum eVideoAnalogCableType to convert the ushort value to source video analog cable type enum or vice versa. This value is used to determine the cable equalization. Invalid values are ignored. | |
| SourceVideoAnalogLengthFeedback |
Property to report the length of the DM cable in meters.
Reported values will range from 0d to 254d (254m). | |
| SourceVideoLockedStatusFeedback |
Property to report that the video image has been locked.
The output remains true for as long as the video is locked. When the output is false, this indicates no picture. | |
| StandbyTimeout | Property to set the standby timeout (1d = 1 minute). The standby timeout is the period from the last use of the touchscreen before going into standby mode (screen display is off but power is on). Valid values range from 0d (no standby timeout) to 120d (120 minutes). | |
| StandbyTimeoutDown |
Decrements the standby timeout by one (1) minute with each pulse of the input.
If the input remains true for 0.5 seconds, the standby timeout period will auto-decrement until the input goes false or until it reaches 0 minutes (no standby timeout). | |
| StandbyTimeoutFeedback | Property to report the standby timeout period (1d = 1 minute). Reported value range from 0d (no standby timeout) to 120d (120 minutes). | |
| StandbyTimeoutUp |
Increments the standby timeout by one (1) minute with each pulse
of the input. The standby timeout is the period from the last use of the touchscreen
before going into standby mode (screen display is off but power is on).
If the input remains true for 0.5 seconds, the standby timeout period will auto-increment until the input goes false or until it reaches the maximum value of 120 minutes. | |
| StringInput |
String Inputs on the device extender.
(Inherited from DeviceExtender) | |
| StringOutput |
String Outputs on the device extender.
(Inherited from DeviceExtender) | |
| TouchCalibrationCompleteFeedback | Property to report that the touch calibration procedure is complete (or has timed out). | |
| TouchCalibrationFailFeedback |
Property to report the result of the touch calibration procedure.
When "Fail" is true, this indicates that calibration failed. The output remains true until the next pulse of TouchCalibrationStart. | |
| TouchCalibrationInProgressFeedback |
Property to report that the touch calibration procedure is in progress.
The output goes true on the rising edge of TouchCalibrationStart pulse and remain true for as long as the procedure is in progress. | |
| TouchCalibrationPassFeedback |
Property to report the result of the touch calibration procedure.
When "Pass" is true, this indicates that calibration was successful. The output remains true until the next pulse of TouchCalibrationStart. | |
| TouchCalibrationPositionXFeedback | Property to report the current X coordinates of the icon during touch calibration. | |
| TouchCalibrationPositionYFeedback | Property to report the current Y coordinates of the icon during touch calibration. | |
| TouchCalibrationStartFeedback |
Property to report that touch calibration has been initiated.
The output remains true for as long as touch calibration is in progress. | |
| UsbAlternateHidControl | Property to set the destination for HID data when the address is set to "Alternate" (UseDmNetForHidFeedback = true). This input should be connected to the corresponding HidSwitchCommandFeedback of the DVPHD System 2 Reserved Joins extender. | |
| UsbAlternateHidControlFeedback | Property to report the current Alternate address. | |
| UsbDeviceDetectedFeedback |
Property to report a USB device detected at the USB HID port.
The output remains true for as long as the error is detected. | |
| UsbHidControl | Property to set the destination for HID data when the address is set to "DM Net" (UseDmNetForHidFeedback = true). This input should be connected to the corresponding output HidSwitchCommandFeedback of the DVPHD System 2 Reserved Joins extender. | |
| UsbHidControlFeedback | Property to report the current HID address. | |
| UsbKmHidControl | Property to set the destination for HID data when the address is set to "KM" (HidUseKmFeedback = true). This address is used when the KM data is broken out to a VMK-WIN. This input should be connected to the corresponding output (UsbHidControl) of the VMK-WIN Configuration slot. | |
| UsbKmHidControlFeedback | Property to report the current KM address. | |
| UseDmNetForHid |
Property to select the destination DM Net where HID data will be sent.
The selection will be active for as long as the input is true.
If both UseDmNetForHid and HidUseAlternate inputs are high, the DM Net address takes precedence. HID data includes touch output data, and, if HidUseKm = false, keyboard/mouse data.When set to "DM Net", the HID data will be routed via DM Net to the address specified by UsbHidControl . | |
| UseDmNetForHidFeedback | Property to report the current HID destination set to DM Net. | |
| UShortInput |
UShort Inputs on the device extender.
(Inherited from DeviceExtender) | |
| UShortOutput |
UShort Outputs on the device extender.
(Inherited from DeviceExtender) |
| Name | Description | |
|---|---|---|
| AudioBeepOff | Turns off the audio beep. | |
| AudioBeepOn | Turns on the audio beep. The input has no effect if the master audio is turned off (AudioMasterOffFeedback = true). | |
| AudioHdmiOff | Property to turn off the HDMI audio. | |
| AudioHdmiOn |
Turns on the HDMI audio.
The input has no effect if the master audio is turned off. (AudioMasterOffFeedback = true.) | |
| AudioLineOff | Turns off the line audio. | |
| AudioLineOn |
Turns on the line audio.
The input has no effect if the master audio is turned off (AudioMasterOffFeedback = true). | |
| AudioMasterOff | Turns off all audio. | |
| AudioMasterOn | Turns on all audio. | |
| AudioMicOff | Turns off the Mic audio. | |
| AudioMicOn |
Turns on the Mic audio.
The input has no effect if the master audio is turned off (AudioMasterOffFeedback = true). | |
| AudioWavOff | Turns off the WAV audio. | |
| AudioWavOn |
Turns on the WAV audio with a pulse.
The input has no effect if the master audio is turned off (AudioMasterOffFeedback = true). | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| InitializeJoins |
Method to initialize the sigs of the Glass extender
(Overrides DeviceExtenderInitializeJoins) | |
| MapAnalogInputJoins |
Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender) | |
| MapAnalogOutputJoins |
Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender) | |
| MapDigitalInputJoins |
Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender) | |
| MapDigitalOutputJoins |
Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender) | |
| MapSerialInputJoins |
Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender) | |
| MapSerialOutputJoins |
Protected function to map joins to the join collection on the parent device.
(Inherited from DeviceExtender) | |
| SendCueEventDataForDeviceExtender |
Function to trigger the DeviceExtender Sig Change event
(Inherited from DeviceExtender) | |
| SourceDigitalDisable | Disables the digital (HDMI) video. | |
| SourceDigitalEnable | Enables the digital (HDMI) video. | |
| ToString | Returns a string that represents the current object. (Inherited from Object) | |
| TouchCalibrationStart | Puts the V-Panel into touch calibration mode. | |
| Use |
Set the extender as usable on the device.
Call this method before registration of the device.
(Inherited from DeviceExtender) |
| Name | Description | |
|---|---|---|
| DeviceExtenderSigChange |
Event to receive sig information intended for a device extender.
When processing this event, it will hold off other sigs from being received from the device.
If one desires to continue processing the data and receive more information, launch a new thread
and allow this event to exit.
(Inherited from DeviceExtender) |
| Name | Description | |
|---|---|---|
| _InUse |
Bool to determine if the extended is in use by the user.
(Inherited from DeviceExtender) |