Click or drag to resize

ZummeshNetbridge Methods

The ZummeshNetbridge type exposes the following members.

Methods
 NameDescription
Public methodCancelFirmwareUpdate Method to cancel all the pending updates. The FirmwareUpdateStatusFeedback will trigger to reflect the state of the controller. The minimum firmware version on the device which supports this property is v1.008.0001.
Public methodClearErrors Method to clear the error log in the bridge.
Public methodClearMissingDevices Method to erase any record of the missing devices from the bridge.
Public methodDisableDaylighting Method to disable daylighting (daylight harvesting) in the room. (Can only be turned back on by calling the method Activate for scene1).
Public methodDisableOccupancySensor Method to instruct the room to not act upon occupancy sensor events, both real and forced.
Public methodDispose Clean up of resources.
(Inherited from GenericBase)
Protected methodDispose(Boolean) Method to perform the actual disposing of the device.
(Inherited from GenericDevice)
Public methodEnableOccupancySensor Method to instruct the room to act upon occupancy sensor events, both real and forced.
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Protected methodFinalize Destructor of the device.
(Inherited from GenericDevice)
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Protected methodOnBaseEvent(Int32) Protected member used to fire the BaseEvent with the default extended information.
(Inherited from GenericBase)
Protected methodOnBaseEvent(Int32, UInt16) Protected member used to fine the BaseEvent with extended event information.
(Inherited from GenericBase)
Public methodPlugLoadOff Method to turn off all the plug loads. The PlugControllerStatusFeedback will trigger to reflect the state of the controller. The minimum firmware version on the device which supports this property is v1.008.0001.
Public methodPlugLoadOn Method to turn on all the plug loads. The PlugControllerStatusFeedback will trigger to reflect the state of the controller. The minimum firmware version on the device which supports this property is v1.008.0001.
Public methodRegister Register this device with the system.
(Inherited from GenericDevice)
Public methodRoomAllOff Method to turn all the lights in the room off. This method will disable the daylighting (daylight harvesting) in the room also.
Public methodSaveBluetoothPin Method to save the bluetooth pin. Calling this method will instruct the device to assign the Desired Bluetooth PIN to the Bluetooth module. If the bluetooth pin is set, then the BluetoothPinFeedback will get reflected with the latest pin.
Public methodSaveFloorAndZoneId Method to save the floor and zone Id. The programmer needs to invoke the SetZoneId(UInt16) and SetFloorId(UInt16) before invoking this property. The default values for the Floor Id and Zone Id are 0. The minimum firmware version on the device which supports this property is v1.008.0001.
Public methodSetBluetoothPin Property to set the bluetooth pin. This is a 4-digit access code you wish to assign to the Bluetooth module on the device. Valid values are 0 through 9999 inclusive. The default pin on the device is 2468.
Public methodSetFloorId Method to set the Floor Id. Valid values are 0 to 0xff. 0 indicates wildcard for the floor Id. The FloorIdFeedback will get updated to reflect the current floor Id. The minimum firmware version on the device which supports this property is v1.008.0001.
Public methodSetZoneId Method to set the Zone Id. Valid values are 0 to 0xff. 0 indicates wildcard for the Zone Id. The ZoneIdFeedback will get updated to reflect the current Zone Id. The minimum firmware version on the device which supports this property is v1.008.0001.
Public methodToString Return the name of the device.
(Inherited from GenericDevice)
Public methodUnRegister Unregister this device with the system. This function can not be called from the device's own SigChange event handler.

On successful unregistration, if this device supports the OnlineStatusChange event, it will trigger indicating the device when offline.


(Inherited from GenericDevice)
Top
See Also