Zum |
The ZumJBoxSwitchLoadBase type exposes the following members.
| Name | Description | |
|---|---|---|
| DebugFeedback |
Property to display debug messages related to fault conditions.
This property is supported by GL-EXP-SW-CN device only.
The LoadStateChange event will trigger with SerialDebugFeedbackEventId. (Inherited from SwitchedLoad) | |
| DeviceLoadIsOn |
Property to Get the lighting device this load is on.
(Inherited from SwitchedLoad) | |
| ErrorFeedback |
Property to display Load status and errors: Valid values: 0x0000 = Normal
This property is supported by GL-EXP-SW-CN device and Horizon EX Swtiches.
The LoadStateChange event will trigger with ErrorEventId. (Inherited from SwitchedLoad) | |
| InExternalOverrideFeedback |
Indicates if the device is in external override mode.
True = In external override; False = External override released
This property is not supported by ZumLinkDtQuattroDlsRly, ZumLinkIrQuattroDlsRly, ZumLinkIrQuattroHdDlsRly,
ZumLinkUsHallwayDlsRly, ZumLinkUsOnewayDlsRly and ZumLinkUsQuattroDlsRly devices.
The OverrideEventHandler event will trigger with External. | |
| InManualOverrideFeedback |
Indicates if the device is in manual override mode.
True = In manual override; False = Manual override released
This property is not supported by ZumLinkDtQuattroDlsRly, ZumLinkIrQuattroDlsRly, ZumLinkIrQuattroHdDlsRly,
ZumLinkUsHallwayDlsRly, ZumLinkUsOnewayDlsRly, ZumLinkUsQuattroDlsRly, ZumLinkJbox20APlug and
"ZumNetJBoxDaliGroups" and "ZumNetDinDaliGroups" devices.
The OverrideEventHandler event will trigger with Manual. | |
| IsOn |
Property to determine if the load is on.
The LoadStateChange event will trigger with IsOnEventId. (Inherited from SwitchedLoad) | |
| LoadShedEnable | This property is to enter load into the loadshed state and set the light level to defined value. true: to enter the load into loadshed state; false: to bring the load out of loadshed state. | |
| LoadShedEnabledFeedback |
This property is to indicate that dimmer is in loadshed state.
true: dimmer is in loadshed state: false: dimmer is not in loadshed state.
This property will trigger LoadStateChange event with LoadShedEnabledFeedbackEventId. | |
| LoadshedLevel | This property sets the loadshed level to defined value. | |
| LoadshedLevelFeedback |
This property reports Load shed level feedback.
This property will trigger LoadStateChange with LoadShedLevelFeedbackEventId. | |
| Number |
Number of this load.
(Inherited from SwitchedLoad) | |
| OverrideDisabledFeedback | Obsolete. This property is to indicate that override mode is disabled. True: relay ignores the override mode: False: relay override mode is enabled. This property will trigger LoadStateChange event with OverrideDisabledEventId. | |
| OverrideLevel | This property sets the Override level to defined value. This property is not supported by ZumLinkDtQuattroDlsRly, ZumLinkIrQuattroDlsRly, ZumLinkIrQuattroHdDlsRly, ZumLinkUsHallwayDlsRly, ZumLinkUsOnewayDlsRly, ZumLinkUsQuattroDlsRly, ZumLinkJbox20APlug and "ZumNetJBoxDaliGroups" and "ZumNetDinDaliGroups" devices. | |
| OverrideLevelFeedback |
This property reports override level feedback.
This property is not supported by ZumLinkDtQuattroDlsRly, ZumLinkIrQuattroDlsRly, ZumLinkIrQuattroHdDlsRly,
ZumLinkUsHallwayDlsRly, ZumLinkUsOnewayDlsRly, ZumLinkUsQuattroDlsRly, ZumLinkJbox20APlug and
"ZumNetJBoxDaliGroups" and "ZumNetDinDaliGroups" devices.
This property will trigger LoadStateChange with OverrideLevelFeedbackEventId. | |
| Parent |
The parent that a this load is added to.
(Inherited from LightLoad) | |
| Type |
Type of load this object represents.
(Inherited from SwitchedLoad) | |
| UserSpecifiedObject |
Object holder for any use by the programmer.
(Inherited from LightLoad) |