HdmiOutWithColorSpaceModeVideoWallMode Property |
Property to specify which portion of the wall image to display in wall mode, where each display in a wall of displays shows a portion of the image.
Displays can be laid out in configurations up to 8x8. Each display requires connection to a separate scaler.
The wall mode can be specified using the following method:
The video portion can be defined using the 4 digit decimal value WHXY where:
W is the width of the wall (number of columns that make up the wall)
H is the height of the wall (number of rows)
X is the horizontal position of that display on the wall
Y is the vertical position of that display on the wall
For example, for a 2x2 video wall the upper left would be 2211, the upper right 2221, the lower left 2212 and the lower right 2222.
0 disables the wall mode.
This property is supported only by "Dm100xStrBase".
This method is not supported for the "HdmiOut" on the "DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices.
Namespace: Crestron.SimplSharpPro.DeviceSupportAssembly: Crestron.SimplSharpPro.DeviceSupport (in Crestron.SimplSharpPro.DeviceSupport.dll) Version: 2.21.121
Syntaxpublic UShortInputSig VideoWallMode { get; }Property Value
UShortInputSigVersion Information
.NET
Supported in: 6.0
.NET Compact Framework
Supported in: 3.5
See Also