Hdmi |
The HdmiOutWithColorSpaceMode type exposes the following members.
| Name | Description | |
|---|---|---|
| AudioChannelsFeedback |
Reports the number of audio channels detected.
The StreamChange event will trigger with AudioChannelsEventId for Input Streams. The StreamChange event will trigger with AudioChannelsEventId for Output Streams. (Inherited from Stream) | |
| AudioFormatFeedback |
Reports the detected audio format accompanying the video.
The StreamChange event will trigger with AudioFormatEventId for Input Streams. The StreamChange event will trigger with AudioFormatEventId for Output Streams. This property is supported for "DmRmc100Str" device.(Inherited from Stream) | |
| AutomaticPowerSetting |
Automatic Power Settings for the DM device
This property will trigger AutomaticPowerSettingChange event with DMOutputEventIds. | |
| BackgroundImage |
Background Image for the DM device
This property will trigger BackgroundImagePropertyChange event with DMOutputEventIds. | |
| BlankDisabledFeedback |
Property to indicate that the output is unblanked.
The StreamChange event will trigger with BlankDisabledEventId. This property is not supported by "HdWp4k401C".(Inherited from HdmiOutStreaming) | |
| BlankEnabledFeedback |
Property to indicate that the output is blanked.
The StreamChange event will trigger with BlankEnabledEventId. This property is not supported by "HdWp4k401C".(Inherited from HdmiOutStreaming) | |
| ConnectedDevice |
Information about the "Dge100" or "DmTxRx100Str" or "DmRmc100Str" device connected to this stream.
This property will trigger the DeviceInformationChange event with ConnectedDeviceEventIds. (Inherited from HdmiOutStreaming) | |
| DisabledByHdcpFeedback |
Indicates that the corresponding output has been disabled as the result of a failure during HDCP authentication.
This occurs when HDCP (High-bandwidth Digital Content Protection) is detected at the input,
but the display or other loopback device is not HDCP compliant.
This also occurs when the maximum number of display devices that can be used with the video source
(based on the application of keys and KSVs) has been exceeded.For more information about keys and KSVs, see HDCP.
This is supported for some of the devices only.
'true' = Output disabled by HDCP; 'false' = Output not disabled by HDCP
The StreamChange event will trigger with DisabledByHdcpEventId. (Inherited from Hdmi) | |
| DisplayBlankDisabledFeedback | Obsolete. Property to indicate that the output is unblanked. The StreamChange event will trigger with BlankDisabledEventId. (Inherited from HdmiOutStreaming) | |
| DisplayBlankEnabledFeedback | Obsolete. Property to indicate that the output is blanked. The StreamChange event will trigger with BlankEnabledEventId. (Inherited from HdmiOutStreaming) | |
| EdidCapabilityFeedback |
Property to report the output EDID 3D info. This property is supported for "DmDge200C" only.
The StreamChange event will trigger with EdidCapabilityEventId. (Inherited from HdmiOutStreaming) | |
| EdidFeedback |
Property to return the Output EDID data block. This property is supported for "DmDge200C" only.
The StreamChange event will trigger with EdidEventId. (Inherited from HdmiOutStreaming) | |
| EdidMaximumColorDepthFeedback |
Property to report the maximum color depth from the EDID. This property is supported for "DmDge200C" only.
The StreamChange event will trigger with EdidMaximumColorDepthEventId. (Inherited from HdmiOutStreaming) | |
| EdidValidFeedback |
Property to indicate that a valid EDID is detected by the system. This property is supported for "DmDge200C" only.
The StreamChange event will trigger with EdidValidEventId. (Inherited from HdmiOutStreaming) | |
| EncryptionMode |
Property to set the encryption mode.
This property is only valid if the Type is equal to Transmit (Inherited from Stream) | |
| EncryptionModeFeedback |
Property to report the encryption mode.
This property is only valid if the Type is equal to Transmit The StreamChange event will trigger with EncryptionModeEventId for Output Streams. (Inherited from Stream) | |
| EncryptionStatusAsTextFeedback |
This property is only valid if the Type is equal to Receive The StreamChange event will trigger with EncryptionStatusEventId for Input Streams. (Inherited from Stream) | |
| EncryptionStatusFeedback |
Property to report the encryption status of the stream.
This property is only valid if the Type is equal to Receive The StreamChange event will trigger with EncryptionStatusEventId for Input Streams. (Inherited from Stream) | |
| ForceHdcpDisabledFeedback |
Indicates that the "force HDCP" setting is disabled. The output remains 'true' for as long as the setting is disabled.
'true' = Force HDCP disabled; 'false' = No effect
The StreamChange event will trigger with ForceHdcpDisabledEventId. This property is not supported by "HdWp4k401C" and "AM-200.(Inherited from HdmiOutStreaming) | |
| ForceHdcpEnableFeedback |
Indicates that the "force HDCP" setting is enabled. The output remains 'true' for as long as the setting is enabled.
'true' = Force HDCP enabled; 'false' = No effect
The StreamChange event will trigger with ForceHdcpEnabledEventId. This property is not supported by "HdWp4k401C" and "AM-200.(Inherited from HdmiOutStreaming) | |
| HdcpMode |
Property to set the HDCP Mode for the output.
If this property is not supported then Unused will be returned and write to this property will be ignored.
(Inherited from HdmiOutStreaming) | |
| HdcpModeFeedback |
Reports the active HDCP Mode for the output.
If this property is not supported then Unused will be returned and write to this property will be ignored.
This will trigger the "OnStreamChange" with HdcpModeFeedbackEventId.
(Inherited from HdmiOutStreaming) | |
| HdcpSupportOffFeedback |
Property to determine if HDCP support is turned off.
'true' = HDCP Support off; 'false' =HDCP Support on
This property is supported only for "Am200", "Am300", "Dge100", "DmDge200C", "DmTxRx100Str" and "DmTxRx4k1000Jstr".
(Inherited from Hdmi) | |
| HdcpSupportOnFeedback |
Property to determine if HDCP support is turned on.
'true' = HDCP Support on; 'false' =HDCP Support off
This property is supported only for "Am200", "Am300", "Dge100", "DmDge200C", "DmTxRx100Str" and "DmTxRx4k1000Jstr".
(Inherited from Hdmi) | |
| HdcpTransmitterMode | Property to set the HDCP Mode for the output. This property is supported only by "Dm100xStrBase". | |
| HdcpTransmitterModeFeedback | Property to report the HDCP Mode for the output. This property is supported only by "Dm100xStrBase". | |
| HdrTypeFeedback |
Property to report the HDR Type for the video input.
If not supported, returns Hdr. This property is only supported for the "HdmiOut" on the "DmNvx360", DmNvx360C", "DmNvx363" and DmNvx363C" devices.
The StreamChange event will trigger with HdrTypeFeedbackEventId. | |
| HorizontalBezelCompensation | Property to set the horizontal bezel compensation for the scaler. Valid values range from 0 to 500, where 1 = 1 pixel This method is not supported for the "HdmiOut" on the "DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices. | |
| HorizontalBezelCompensationFeedback |
Property to report the horizontal bezel compensation for the scaler. Valid values range from 0 to 500, where 1 = 1 pixel.
The StreamChange event will trigger with HorizontalBezelCompensationFeedbackEventId for this feedback. This method is not supported for the "HdmiOut" on the "DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices. | |
| HotplugDetectedFeedback |
Indicates that a "hot plug" has been detected.
'true' = Hot plug detected ; 'false' = Hot plug not detected.
The StreamChange event will trigger with HotplugDetectedEventId. | |
| MulticastTTL |
Property to set the time to live for the multicast.
This property is only valid if the Type is equal to Transmit (Inherited from Stream) | |
| MulticastTTLFeedback |
Property to report the time to live for the multicast.
This property is only valid if the Type is equal to Transmit The StreamChange event will trigger with MulticastTTLEventId for Output Streams. (Inherited from Stream) | |
| Name | Property to set the name of the HDMI output. This property is only supported by "DmfXx4kSfp" device. | |
| NameFeedback |
Property to report the name of the HDMI output.
This property is only supported by "DmfXx4kSfp" device.
The StreamChange event will trigger with NameFeedbackEventId. | |
| OutputDisabledFeedback |
Indicates that the HDMI output is disabled. The output remains 'true' for as long as the output is disabled.
'true' = Output disabled; 'false' = Output enabled
The StreamChange event will trigger with OutputDisabledEventId. (Inherited from HdmiOutStreaming) | |
| OutputEnabledFeedback |
Indicates that the HDMI output is enabled. The output remains 'true' for as long as the output is enabled.
'true' = Output enabled; 'false' = Output disabled
The StreamChange event will trigger with OutputEnabledEventId. (Inherited from HdmiOutStreaming) | |
| OutputStandbyFeedback |
Reports output standby when video stream or output is not present to the display..
The StreamChange event will trigger with OutputStandbyFeedbackEventId. This property is only supported for the "HdmiOut" on the "DmNvxD30, DmNvxD30C and DmNvxD80-IOAV" devices. | |
| Owner |
This represents the owner of this stream and needs to be cast accordingly.
(Inherited from Stream) | |
| Resolution |
Property to set the resolution of the screen.
(Inherited from HdmiOutWithResolution) | |
| ResolutionFeedback |
Property to report the current screen resolution.
The StreamChange event will trigger with ResolutionEventId. (Inherited from HdmiOutWithResolution) | |
| RtspFileName |
Property to set the file name when used in RTSP mode.
Default value is = "live.sdp".
This property is only valid if the Type is equal to Transmit.
(Inherited from Stream) | |
| RtspFileNameFeedback |
Property to report the file name when used in RTSP mode.
This property is only valid if the Type is equal to Transmit The StreamChange event will trigger with RtspFileNameEventId for Output Streams. (Inherited from Stream) | |
| RtspSessionName |
Property to set the session name when used in RTSP mode.
This property is only valid if the Type is equal to Transmit (Inherited from Stream) | |
| RtspSessionNameFeedback |
Property to report the session name when used in RTSP mode.
This property is only valid if the Type is equal to Transmit The StreamChange event will trigger with RtspSessionNameEventId for Output Streams. (Inherited from Stream) | |
| StreamAuthenticatedFeedback |
Property to report if the stream is authenticated.
This property is only valid if the Type is equal to Receive The StreamChange event will trigger with StreamAuthenticatedEventId for Input Streams. (Inherited from Stream) | |
| StreamCec |
Get access to the stand alone device's ability to send and receive CEC messages over the HDMI port.
Note that the Owner property of the StreamCec object will now point back to the HDMI that owns the port.
It used point to the device that owned the HDMI port.
This property will trigger CecChange event with CecEventIds. (Inherited from Hdmi) | |
| SyncDetectedFeedback |
Indicates that video sync levels are detected at the input. The sig remains true for as long as sync is detected.
The StreamChange event will trigger with SourceSyncEventId for Input Streams. The StreamChange event will trigger with SyncDetectedEventId for Output Streams. (Inherited from Hdmi) | |
| TransmittingFeedback |
Property to indicate if a valid video signal is generated at the HDMI Output (when = 'true').
The StreamChange event will trigger with TransmittingEventId. | |
| Type |
Property to return the stream type.
(Inherited from Stream) | |
| Underscan |
Property to set the underscan of the device (used to fit to a display). Available options are 0%, 5%, 10%, 15%.
Use PercentToUshort(Single) to convert
the percentage to a ushort value or UshortToPercent(UInt16) to convert
the ushort value to percentage.
This method is not supported for the "HdmiOut" on the "DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices.
(Inherited from HdmiOutStreaming) | |
| UnderscanFeedback |
Property to report that the underscan value of the device.
Use PercentToUshort(Single) to convert
the percentage to a ushort value or UshortToPercent(UInt16) to convert
the ushort value to percentage.
The StreamChange event will trigger with UnderscanEventId. This method is not supported for the "HdmiOut" on the "DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices.(Inherited from HdmiOutStreaming) | |
| UnsupportedVideoFeedback |
Property to indicate if the video is HDMI Input/Output supported video or not.
true = HDMI Input/Output unsupported video; false = HDMI Input/Output supported video
The StreamChange event will trigger with UnsupportedVideoEventId. The StreamChange event will trigger with UnsupportedVideoEventId. This property is supported by DM-NVX-D10, DM-NVX-D20, DM-NVX-E10 and DM-NVX-E20 devices only.(Inherited from Hdmi) | |
| VerticalBezelCompensation | Property to set vertical bezel compensation for the scaler. Valid values range from 0 to 500, where 1 = 1 pixel This method is not supported for the "HdmiOut" on the "DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices. | |
| VerticalBezelCompensationFeedback |
Property to report the vertical bezel compensation for the scaler. Valid values range from 0 to 500, where 1 = 1 pixel.
The StreamChange event will trigger with VerticalBezelCompensationFeedbackEventId for this feedback. This method is not supported for the "HdmiOut" on the "DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices. | |
| VideoAttributes |
Enhanced Video Attributes for the DM device
This property will trigger AttributeChange event with VideoAttributeEventIds. (Inherited from HdmiOutStreaming) | |
| VideoOutputFreezeDisabledFeedback |
Indicates that the video output freeze is disabled.
'true' = Video Output Freeze disabled; 'false' = Video Output Freeze enabled
The StreamChange event will trigger with VideoOutputFreezeDisabledEventId. This method is not supported for the "HdmiOut" on the "DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices. | |
| VideoOutputFreezeEnabledFeedback |
Property to indicate that the video output freeze is enabled.
'true' = Video Output Freeze enabled; 'false' = Video Output Freeze disabled
The StreamChange event will trigger with VideoOutputFreezeEnabledEventId. This property is not supported by "DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices. | |
| VideoOutputTimeoutDisabledFeedback |
Indicates that the video output timeout is disabled.
'true' = Video Output Timeout disabled; 'false' = Video Output Timeout enabled
The StreamChange event will trigger with VideoOutputTimeoutDisabledEventId. This method is not supported for the "HdmiOut" on the "DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices. | |
| VideoOutputTimeoutEnabledFeedback |
Property to indicate that the video output timeout is enabled.
'true' = Video Output Timeout enabled; 'false' = Video Output Timeout disabled
The StreamChange event will trigger with VideoOutputTimeoutEnabledEventId. This property is not supported by "DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices. | |
| VideoTimeout | Property to set the time for the unit to timeout if no stream is being received. This method is not supported for the "HdmiOut" on the "DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices. | |
| VideoTimeoutFeedback |
Property to indicate unit timeout if no stream is being received.
The StreamChange event will trigger with VideoTimeoutEventId. This method is not supported for the "HdmiOut" on the "DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices. | |
| VideoWallMode | Property to specify which portion of the wall image to display in wall mode, where each display in a wall of displays shows a portion of the image. Displays can be laid out in configurations up to 8x8. Each display requires connection to a separate scaler. The wall mode can be specified using the following method: The video portion can be defined using the 4 digit decimal value WHXY where: W is the width of the wall (number of columns that make up the wall) H is the height of the wall (number of rows) X is the horizontal position of that display on the wall Y is the vertical position of that display on the wall For example, for a 2x2 video wall the upper left would be 2211, the upper right 2221, the lower left 2212 and the lower right 2222. 0 disables the wall mode. This property is supported only by "Dm100xStrBase". This method is not supported for the "HdmiOut" on the "DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices. | |
| VideoWallModeFeedback | Property to report which portion of the wall image is displayed in wall mode, where each display in a wall of displays shows a portion of the image. Displays can be laid out in configurations up to 8x8. Each display requires connection to a separate scaler. The wall mode can be specified using the following method: The video portion can be defined using the 4 digit decimal value WHXY where: W is the width of the wall (number of columns that make up the wall) H is the height of the wall (number of rows) X is the horizontal position of that display on the wall Y is the vertical position of that display on the wall For example, for a 2x2 video wall the upper left would be 2211, the upper right 2221, the lower left 2212 and the lower right 2222. 0 disables the wall mode. This property is supported only by "Dm100xStrBase". This method is not supported for the "HdmiOut" on the "DmNvxE30","DmNvxE30C","DmNvxE31" and "DmNvxE31C" devices. |