Click or drag to resize

Glpp1DimFlv2ExPm Properties

The Glpp1DimFlv2ExPm type exposes the following members.

Properties
 NameDescription
Public propertyButton Get the collection of the Button objects for this device.
(Inherited from GlppBase)
Public propertyCommandReceivedFeedbacks Property to indicate that the corresponding button on the IR remote has been pressed.
(Inherited from GlppBase)
Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyContactClosure Get the Button object corresponding to the ContactClosure button for this device.
(Inherited from GlppBase)
Public propertyCurrentTimeoutFeedback Property to report the current timeout period.

The GlppOccupancySensorIrChange event will trigger with TimeoutFeedbackEventId.


(Inherited from GlppBase)
Public propertyDayLevelClosedLoopFeedback Property to report the load level that was when the Day Level (closed loop) was last set.
(Inherited from GlppDimmerBase)
Public propertyDaylightingActiveFeedback Property to indicate the status of daylighting.
(Inherited from GlppBase)
Public propertyDayPhotoValueClosedLoopFeedback Property to report the photocell value that was when the Day Level (closed loop) was last set.
(Inherited from GlppDimmerBase)
Public propertyDefeatLocalButtonLogic Property to disable local button logic.
(Inherited from GlppBase)
Public propertyDefeatLocalMotionLogic Property to disable all local (internal, factory-programmed) occupancy sensor logic.
(Inherited from GlppBase)
Public propertyDefeatLocalPhotocellLogic Property to disable all local (internal, factory-programmed) photocell logic.
(Inherited from GlppBase)
Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDimmingLoads Collection of LDimming Loads for this device.
(Inherited from GlppLDimmerBase)
Public propertyDisableNightlightMode Property to turn off LED "nightlight" mode.
(Inherited from GlppBase)
Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from GenericDevice)
Public propertyEnableRawMotionData Property to enable raw motion data reporting.
(Inherited from GlppBase)
Public propertyEnableRawPhotocellData Property to enable raw photocell data reporting.
(Inherited from GlppBase)
Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyLoadCurrentFeedback Property to report the amount of current level, in Amps, that is being drawn by all loads.
(Inherited from GlppDimmerBase)
Public propertyLoadCurrentMinimumChange Property to define the minimum change in current that must occur before the value is reported on the "LoadCurrentFeedback" Sig.
(Inherited from GlppDimmerBase)
Public propertyMasterLower Property to perform a Master Lower of all loads to 0% that are above 0% in the time given by "SetRampTime" parameter.
(Inherited from GlppDimmerBase)
Public propertyMasterRaise Property to perform a Master Raise of all loads to 100% that are above 0% in the time given by "SetRampTime" parameter.
(Inherited from GlppDimmerBase)
Public propertyMinimumLevelClosedLoopFeedback Property to report the load level that was when the Minimum Level (closed loop) was last set.
(Inherited from GlppDimmerBase)
Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyNightLevelClosedLoopFeedback Property to report the load level that was when the Night Level (closed loop) was last set.
(Inherited from GlppDimmerBase)
Public propertyNightPhotoValueClosedLoopFeedback Property to report the photocell value that was when the Night Level (closed loop) was last set.
(Inherited from GlppDimmerBase)
Public propertyNumberOfLoads The number of Lighting Loads for the GLPP Series Device.
(Inherited from GlppBase)
Public propertyOccupancyActionFeedback Property to report the currently selected occupancy action, which will be triggered when the room goes from the unoccupied to the occupied state.
(Inherited from GlppBase)
Public propertyOccupancyDetectedFeedback Property to indicate the occupancy status of the room.

The GlppOccupancySensorIrChange event will trigger with RoomIsOccupiedFeedbackEventId.


(Inherited from GlppBase)
Public propertyOffLastRecallFeedback Property to indicate that the last preset that have been recalled is set to off.
(Inherited from GlppBase)
Public propertyOnLastRecallFeedback Property to indicate that the last preset that have been recalled is set to on.
(Inherited from GlppBase)
Public propertyOutputEnable Property to allow the IR remote button presses to be reported.
(Inherited from GlppBase)
Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyPhotocellLoads Photocell Loads of the GLPP Series Device.
(Inherited from GlppBase)
Public propertyPhotoSensorResponseTimeFeedback Property to report the photo sensor response time (adjusted by the "IncreaseResponseTime/DecreaseResponseTime" methods).
(Inherited from GlppBase)
Public propertyPhotoSensorValueFeedback Property to report the raw photo sensor value if the "EnableRawPhotocellData" property value is true.
(Inherited from GlppBase)
Public propertyPresetFadeTimeFeedback Property to report the fade time.
(Inherited from GlppDimmerBase)
Public propertyPresets Collection of Presets for the GLPP Series Device.
(Inherited from GlppBase)
Public propertyProductIdFeedback Property to report the device's Product ID. Internal use only.
(Inherited from GlppBase)
Public propertyRampTimeFeedback Property to report the ramp time.
(Inherited from GlppDimmerBase)
Public propertyRawOccupancyStateFeedback Property to track the state of the occupancy sensor, when raw motion data is enabled.
(Inherited from GlppBase)
Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Public propertyRemoteSwitchType Property to specify the type of 3rd party switch attached to the Keypad+/- terminal of the GLPP device.
(Inherited from GlppBase)
Public propertyRemoteTimeout Property to set the timeout period, which is the interval that must elapse with no motion detected before the state of the room changes from occupied to unoccupied.
(Inherited from GlppBase)
Public propertySetLedOn Property to set the feedback state of the GLPAA keypad LED indicator to ON.
(Inherited from GlppBase)
Public propertySetOccupancyAction Property to set the action that will be triggered when the room goes from the unoccupied to the occupied state. The valid values for the action are defined in eOccupancyActions Enum.
(Inherited from GlppBase)
Public propertySetPresetFadeTime Property to set the fade time (used in preset recalls and On/Off operations) in seconds. Valid values range from 0s to 30s, adjustable in 0.01s increments.
(Inherited from GlppDimmerBase)
Public propertySetRampTime Property to set the ramp time (used in Raise/Lower operations) in seconds. Valid values range from 1s to 10s, adjustable in 0.01s increments.
(Inherited from GlppDimmerBase)
Public propertySetVacatingAction Property to set the action that will be triggered when the room goes from the occupied to the unoccupied state. The valid values for the action are defined in eVacatingActions Enum.
(Inherited from GlppBase)
Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertySystemAddressReceivedFeedback Property to report the IR ID of the IR remote. Reported values will range from 0d (IRID 00) to 31d (IRID 0x1F).
(Inherited from GlppBase)
Public propertyType Property to determine to type of device this is.
(Inherited from GenericDevice)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Public propertyVacatingActionFeedback Property to report the currently selected vacating action, which will be triggered when the room goes from the occupied to the unoccupied state.
(Inherited from GlppBase)
Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Top
See Also