Basalte |
public sealed class BasalteDeseo : GenericDevice
The BasalteDeseo type exposes the following members.
| Name | Description | |
|---|---|---|
| BasalteDeseo(UInt32, CrestronControlSystem) | Constructor used to add the Basalte Deseo to a control system. | |
| BasalteDeseo(UInt32, IDeviceBranch) | Constructor used to add the Basalte Deseo to a cresnet branch. |
| Name | Description | |
|---|---|---|
| Clock | Property to set the time. Value set here can be seen on display. Time format can be 12h or 24h, as per Basalte Deseo Configuration TimeFormat parameter.. | |
| Configuration | Property to set the configuration for Basalte deseo. | |
| ConnectedIpList |
A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID.
This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null.
If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected.
The order of items in this list is not guaranteed.
(Inherited from GenericDevice) | |
| Description |
Get/Set the description of this device.
(Inherited from GenericBase) | |
| Disposed |
Property to indicate if the device has been disposed.
(Inherited from GenericDevice) | |
| ExternalHumidity | Property to set the relative humidity from an external sensor. If enabled in the ‘Basalte Deseo Configuration’ module the humidity can be displayed on the start screen of the Deseo. This value is ignored if the internal sensor is used. | |
| ExternalTemperature | Property to set the room temperature from an external sensor. If enabled in the ‘Basalte Deseo Configuration’ module the temperature can be displayed on the start screen of the Deseo. This value is ignored if the internal sensor is used. | |
| FanMode | Property to set the Fan Mode. | |
| FanModeFeedback |
Property indicates the current fan mode.
The BaseEvent will trigger with FanModeFeedbackEventId for this property. | |
| HumidityFeedback |
Property indicates the relative humidity in following format xx.x.
This will be updated for every 60 seconds, or on change of 1% Humidity, based on the Basalte Deseo Configuration.
The BaseEvent will trigger with HumidityFeedbackEventId for this property. | |
| ID |
Property to get the ID of the device.
(Inherited from GenericDevice) | |
| InternalHumidityFeedback |
Property indicates the relative humidity of the built-in humidity sensor in whole numbers.
The BaseEvent will trigger with InternalHumidityFeedbackEventId for this property. | |
| InternalTemperatureFeedback |
Property indicates the ambient room temperature in tenths of a degree Celsius or Fahrenheit.
The temperature will be updated every 60 seconds, or on every temperature change of 0.5 Celsius. (equal to 0.9 Fahrenheit).
The BaseEvent will trigger with InternalTemperatureFeedbackEventId for this property. | |
| IsCooling | Property indicates that the system is cooling. true = Cool running, false = System not running. | |
| IsHeating | Property indicates that the system is heating. true = Heat running; false = System not running | |
| IsOnline |
Property to get the current online state of the device.
(Inherited from GenericDevice) | |
| MaximumSetpoint | Property returns SystemModeSetpoint object. Property to set the maximum setpoints allowed to display and report by the Deseo. Reported in tenths of a degree. Maximum analog values are as follows: Heat setpoint: 890 (89 F) or 320 (32 C). Cool setpoint: 990 (99 F) or 370 (37 C). | |
| Message | Property to set text string. Value set here can be seen on display. | |
| MinimumSetpoint | Property returns SystemModeSetpoint object. Property to set the minimum setpoints allowed to display and report by the Deseo. Minimum analog values are as follows: Heat setpoint: 380 (38 F) or 30 (3 C). Cool setpoint: 590 (59 F) or 150 (15 C). Reported in tenths of a degree. | |
| MultiTouchLongPressMessage | Property to set text label,if the MultiTouchPressTypeFeedback is set to LongPress. | |
| MultiTouchPressTypeFeedback |
Property indicates the current Multi Touch Press type.
The BaseEvent will trigger with MultiTouchPressTypeFeedbackEventId for this property. | |
| MultiTouchShortPressMessage | Property to set text label,if the MultiTouchPressTypeFeedback is set to ShortPress. | |
| Name |
Get the name of this device.
(Inherited from GenericBase) | |
| Parent |
The parent that a given object was added to.
(Inherited from GenericBase) | |
| Registerable |
Property to indicate that this device can be registered.
(Inherited from GenericDevice) | |
| Registered |
Property to get the current registration state of the device.
(Inherited from GenericDevice) | |
| RegistrationFailureReason |
Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice) | |
| Setpoint |
Property returns SystemModeSetpoint object.
Represents heat, cool and auto setpoint temperatures for display.
In case of auto mode is enabled, it is advised to use single/auto setpoint mode.
Reported in tenths of a degree.
The SystemModeSetpointChange event will trigger with HeatSetpointFeedbackEventId, CoolSetpointFeedbackEventId and AutoSetpointFeedbackEventId for this property. | |
| SIMPLDeviceImplementation |
Internal protected member used for actual device control.
(Inherited from GenericDevice) | |
| StatusFeedback |
Property indicates the keypads software version after a power cycle.
If an invalid string is received on the Configuration input, an error message will be displayed on this output.
The BaseEvent will trigger with StatusFeedbackEventId for this property. | |
| SystemMode | Property to set the system mode. | |
| SystemModeFeedback |
Property indicates the current system mode.
The BaseEvent will trigger with SystemModeFeedbackEventId for this property. | |
| TemperatureFeedback |
Property indicates the ambient room temperature in following format xx.x.
The temperature format and report type can be set using the Basalte Deseo Configuration module.
The temperature will be updated every 60 seconds, or on every temperature change of 0.5 Celsius. (equal to 0.9 Fahrenheit).
The BaseEvent will trigger with TemperatureFeedbackEventId for this property. | |
| Type |
Property to determine to type of device this is.
(Inherited from GenericDevice) | |
| UnRegistrationFailureReason |
Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from GenericBase) | |
| XioEndpointStubSIMPLDevice |
The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the
correct place in hierarchy.
(Inherited from GenericDevice) |
| Name | Description | |
|---|---|---|
| Dispose |
Clean up of resources.
(Inherited from GenericBase) | |
| Dispose(Boolean) |
Method to perform the actual disposing of the device.
(Inherited from GenericDevice) | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize |
Destructor of the device.
(Inherited from GenericDevice) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| OnBaseEvent(Int32) |
Protected member used to fire the BaseEvent with the default extended information.
(Inherited from GenericBase) | |
| OnBaseEvent(Int32, UInt16) |
Protected member used to fine the BaseEvent with extended event information.
(Inherited from GenericBase) | |
| Register |
Register this device with the system.
(Inherited from GenericDevice) | |
| ToString |
Return the name of the device.
(Inherited from GenericDevice) | |
| UnRegister |
Unregister this device with the system. This function can not be called from the device's own SigChange event handler.
On successful unregistration, if this device supports the OnlineStatusChange event, it will trigger indicating the device when offline. (Inherited from GenericDevice) | |
| WakeUp | Method to wake up the dispaly. |
| Name | Description | |
|---|---|---|
| BaseEvent |
Generic base event, triggered when the there are no other handlers available
for a specific EventID.
(Inherited from GenericBase) | |
| IpInformationChange |
Event that tells what IP Address is connected/disconnected from an IP ID for a non-UDP device.
This is only valid for an Ethernet device. An exception will be thrown if it is not.
(Inherited from GenericDevice) | |
| OnlineStatusChange |
Event triggered when the Online status of the device changes.
(Inherited from GenericDevice) | |
| SystemModeSetpointChange | Event triggered when a feedback has changed for SystemModeSetpoint. |