Click or drag to resize

DmcVid4 Methods

The DmcVid4 type exposes the following members.

Methods
 NameDescription
Public methodDisableFullSizeImageCycle Disables cycle mode
Public methodDispose Clean up of resources.
(Inherited from GenericBase)
Protected methodDispose(Boolean) Override of the dispose method to remove the card from the switcher. This is only valid for Input cards and Output card modules (e.g. DmcoXX)
(Inherited from CardDevice)
Public methodEnableFullSizeImageCycle Enables full-size image cycling. In this mode the display cycles from one camera input to the next in full size, at the rate specified by "Image_Rotate_Rate". The cameras cycle sequentially from 1 through 4.If a camera is disabled/not detected, it will be skipped in the sequence. If no cameras are enabled/detected, "No Available Sources" will be displayed.
Public methodEqualsDetermines whether the specified object is equal to the current object.
(Inherited from Object)
Protected methodFinalize Destructor of the device.
(Inherited from GenericDevice)
Public methodFullSizeImage Enables full-size image mode on the rising edge of the input. This displays the camera input specified by "Select_Full_Screen_Image" in full size. If the selected camera is disabled or no video is detected, a blue screen will be displayed.
Public methodGetHashCodeServes as the default hash function.
(Inherited from Object)
Public methodGetTypeGets the Type of the current instance.
(Inherited from Object)
Public methodMultiviewImage Enables multi-view mode. In this mode the video layout is determined by the camera status, as follows: If no cameras are enabled (or detected), "No Available Sources" will be displayed on the screen. If one camera is enabled/detected, the video from that camera will be displayed full screen. If two cameras are enabled/detected, the video will be displayed in dual window layout, where the lower numbered camera is on the left and the higher numbered camera is on the right. If three or four cameras are enabled/detected, the video will be displayed in quad layout, as follows:COMPOSITE IN 1 = Top leftCOMPOSITE IN 2 = Top rightCOMPOSITE IN 3 = Bottom leftCOMPOSITE IN 4 = Bottom rightIn quad mode, if only three cameras are enabled/detected, the disabled camera will be displayed in blue.
Protected methodOnBaseEvent(Int32) Protected member used to fire the BaseEvent with the default extended information.
(Inherited from GenericBase)
Protected methodOnBaseEvent(Int32, UInt16) Protected member used to fine the BaseEvent with extended event information.
(Inherited from GenericBase)
Public methodRegister Register this device with the system.
(Inherited from GenericDevice)
Public methodToString String representation of this DM card.
(Inherited from CardDevice)
Public methodUnRegister Unregister this device with the system. This function can not be called from the device's own SigChange event handler.

On successful unregistration, if this device supports the OnlineStatusChange event, it will trigger indicating the device when offline.


(Inherited from GenericDevice)
Top
See Also