Dm |
The DmNaxXZone type exposes the following members.
| Name | Description | |
|---|---|---|
| AirPlayEnabledFeedback |
Indicates if AirPlay is enabled for this zone.
This property will trigger OnZoneChange event with AirPlayEnabledEventId. | |
| Balance |
Sets the audio balance.
Valid values range from -50% to +50%. A value of 0% signifies an even balance between left and right.
(Inherited from Zone) | |
| BalanceFeedback |
Reports the audio balance.
The ZoneChangeEvent event will trigger with BalanceFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with BalanceFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| Bass |
Sets the bass level.
Valid values range from -120 (-12dB) to +120 (+12dB), where 1 = 0.1dB.
(Inherited from Zone) | |
| BassFeedback |
Tracks the value of the corresponding bass integer input.
The ZoneChangeEvent event will trigger with BassFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with BassFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| CastingIsActiveFeedback |
Indicates if the casting is currently active for the Zone.
True = Casting is currently active for the Zone
False = Casting is not active for the Zone
This property will trigger OnZoneChange event with CastingIsActiveEventId. | |
| CastingName | Advertised name for this Zones for the casting services. | |
| CastingNameFeedback |
Advertised name for this zone for the casting services.
This property will trigger OnZoneChange event with CastingNameFeedbackEventId. | |
| ChimeVolume | Specifies the Volume level for the Chimes. | |
| ChimeVolumeFeedback |
Specifies the Volume level for the Chimes.
This property will trigger OnZoneChange event with ChimeVolumeFeedbackEventId. | |
| ClippingFeedback |
Indicates if the output signal is clipping.
This property will trigger OnZoneChange event with ClippingEventId. | |
| CrestronDrcOnFeedback |
Indicates the DRC status. The output is true when DRC is enabled.
When false, this indicates that the feature is turned off.
The ZoneChangeEvent event will trigger with CrestronDRCOnFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with CrestronDRCOnFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| DcOffsetFaultFeedback |
Indicates if there is a DC offset fault.
This property is not supported by "DmNax4zsp" and "dmNax4zsa50" device classes.
This property will trigger OnZoneChange event with DcOffsetFaultEventId. | |
| DoNotDisturbOnFeedback |
Indicates if Do not disturb is on.
This property will trigger OnZoneChange event with DoNotDisturbOnEventId. | |
| DoorbellFeedback |
Indicates the Doorbell mode for this zone. The output is true when doorbell mode is enabled.
When false, this indicates that the feature is turned off.
The ZoneChangeEvent event will trigger with DoorbellEnableFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with DoorbellEnableFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| DoorbellVolume |
Sets the doorbell volume level.
Use "SimplSharpDeviceHelper.PercentToUshort" to convert
the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert
the ushort value to percentage.
This is supported in device firmware versions 4.002.278600000 and higher.
(Inherited from Zone) | |
| DoorbellVolumeFeedback |
Reports the doorbell volume level.
Use "SimplSharpDeviceHelper.PercentToUshort" to convert
the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert
the ushort value to percentage.
This is supported in device firmware versions 4.002.278600000 and higher.
The ZoneChangeEvent event will trigger with DoorbellVolumeFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with DoorbellVolumeFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| DuckingOnFeedback |
Indicates if Ducking is on.
This property will trigger OnZoneChange event with DuckingOnEventId. | |
| EQSelection |
Sets the tone profile, which sets the bass and treble to pre-defined levels.
(Inherited from Zone) | |
| EqSelectionFeedback |
Reports the currently active tone profile with a return type of eEQSelection.
The ZoneChangeEvent event will trigger with EqSelectionFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with EqSelectionFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| IsAmplified |
Indicates if the Zone is Amplified or not.
(Inherited from Zone) | |
| LedFaultIndicationEnabledFeedback |
Indicates if zone led faults indicator is enabled.
This property will trigger OnZoneChange event with LedFaultIndicationEnabledEventId. | |
| LedPowerIndicationEnabledFeedback |
Indicates if zone led power indicator is enabled.
This property will trigger OnZoneChange event with LedPowerIndicationEnabledEventId. | |
| LedSignalDetectIndicationEnabledFeedback |
Indicates if zone led signal detect indicator is enabled.
This property will trigger OnZoneChange event with LedSignalDetectIndicationEnabledEventId. | |
| LeftSpeakerDetectedFeedback |
Returns the left speaker detected
0 = Speaker Not Detected, 1 = Speaker Detected
This property will trigger OnZoneChange event with LeftSpeakerDetectedFeedbackEventId. | |
| LogicalZoneIdFeedback |
Property to return the logical zone id.
This property is not supported when DmNaxXzsaBase is used as a standalone device.
This property will trigger OnZoneChange event with LogicalZoneIdFeedbackEventId. | |
| LoudnessOnFeedback |
Indicates the status of the loudness function. The output is true when loudness is on.
When false, this indicates that loudness is off.
The ZoneChangeEvent event will trigger with LoudnessOnFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with LoudnessOnFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| MaxVolume |
Defines the maximum volume. This allows endpoints to be set for volume control.
(Inherited from Zone) | |
| MaxVolumeFeedback |
Reports the Max volume.
The ZoneChangeEvent event will trigger with MaxVolumeFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with MaxVolumeFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| MinVolume |
Defines the minimum volume. This allows endpoints to be set for volume control.
(Inherited from Zone) | |
| MinVolumeFeedback |
Reports the Min volume.
The ZoneChangeEvent event will trigger with MinVolumeFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with MinVolumeFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| MonoOnFeedback |
Indicates the mono status of the zone. The output is true when zone audio is set to mono.
When false, this indicates stereo audio.
The ZoneChangeEvent event will trigger with MonoOnFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with MonoOnFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| MuteOnFeedback |
Indicates the current mute status. The output is true when mute is active.
When false, this indicates audio has resumed.
The ZoneChangeEvent event will trigger with MuteOnFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with MuteOnFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| Name |
Sets the zone name. The string can consist of alphanumeric characters (20 characters max).
(Inherited from Zone) | |
| NightMode |
Selects the Night mode for the zone.
(Inherited from Zone) | |
| NightModeFeedback |
Indicates the current night mode.
This property will trigger OnZoneChange event with NightModeFeedbackEventId. (Inherited from Zone) | |
| Number |
This Number of the Zone.
(Inherited from Zone) | |
| OutputBus | Sets the bus for the zone. This property is not supported when DmNaxXzsaBase is used as an endpoint. | |
| OutputBusFeedback |
Returns the output bus for the zone.
This property is not supported when DmNaxXzsaBase is used as an endpoint.
This property will trigger OnZoneChange event with OutputBusFeedbackEventId. | |
| OutputBusVolumeOffset |
Sets the volume offset.
The offset ranges from -120 (-12dB) to +120 (+12dB), where 1 = 0.1dB.
(Inherited from Zone) | |
| OutputBusVolumeOffsetFeedback |
Reports the output bus volume offset.
The ZoneChangeEvent event will trigger with OutputBusVolumeOffsetFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with OutputBusVolumeOffsetFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| OverCurrentFaultFeedback |
Indicates if current has exceeded the limit.
This property is not supported by "DmNax4zsp" and "dmNax4zsa50" device classes.
This property will trigger OnZoneChange event with OverCurrentFaultEventId. | |
| OverOrUnderVoltageFaultFeedback |
Indicates if the voltage is not at the right value.
This property is not supported by "DmNax4zsp" and "dmNax4zsa50" device classes.
This property will trigger OnZoneChange event with OverOrUnderVoltageFaultEventId. | |
| OverTemperatureFaultFeedback |
Indicates if over temperature is detected.
This property is not supported by "DmNax4zsp" and "dmNax4zsa50" device classes.
This property will trigger OnZoneChange event with OverTemperatureFaultEventId. | |
| RightSpeakerDetectedFeedback |
Returns the right speaker detected
0 = Speaker Not Detected, 1 = Speaker Detected
This property will trigger OnZoneChange event with RightSpeakerDetectedFeedbackEventId. | |
| SignalPresentFeedback |
Indicates if an output signal is present on this zone.
This property will trigger OnZoneChange event with SignalPresentEventId. | |
| Source |
Select the source to switch to a particular zone, where 1 to 24 are valid for Analog and SPDIF sources.
(Inherited from Zone) | |
| SourceFeedback |
Reports the currently active source.
The ZoneChangeEvent event will trigger with SourceFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with SourceFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| SpotifyConnectEnabledFeedback |
Indicates if spotify connect is enabled for this zone.
This property will trigger OnZoneChange event with SpotifyConnectEnabledEventId. | |
| StartupVolume |
Sets the startup volume.
This is the default volume that will be applied as the switcher transitions from no source selected (0) to a source being routed (1-24).
(Inherited from Zone) | |
| StartupVolumeFeedback |
Reports the startup volume.
The ZoneChangeEvent event will trigger with StartupVolumeFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with StartupVolumeFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| ToneProfile |
Selects the Tone profile for the zone.
(Inherited from Zone) | |
| ToneProfileFeedback |
Indicates the current Tone profile.
This property will trigger OnZoneChange event with ToneProfileFeedbackEventId. (Inherited from Zone) | |
| Treble |
Sets the treble level.
Valid values range from -120 (-12dB) to +120 (+12dB), where 1 = 0.1dB.
(Inherited from Zone) | |
| TrebleFeedback |
Tracks the value of the corresponding treble integer input.
The ZoneChangeEvent event will trigger with TrebleFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with TrebleFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| Volume |
Sets the Zone volume level.
Valid values range from 0% to 100%. where 0% = 0 and 100% = 65535.
Use "SimplSharpDeviceHelper.PercentToUshort" to convert
the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert
the ushort value to percentage.
(Inherited from Zone) | |
| VolumedBFeedback |
Reports the actual volume level in decibels.
Reported values will range from -800 (-80dB) to +200 (+20dB), where 1 = 0.1dB.
The ZoneChangeEvent event will trigger with VolumedBFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with VolumedBFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| VolumeFeedback |
Reports the volume level.
Reported values range from 0 to 100%. where 0% = 0 and 100% = 65535.
Use "SimplSharpDeviceHelper.PercentToUshort" to convert
the percentage to a ushort value or "SimplSharpDeviceHelper.UshortToPercent" to convert
the ushort value to percentage.
The ZoneChangeEvent event will trigger with VolumeFeedbackEventId when this Zone is a part of a Expander. The ZoneChangeEvent event will trigger with VolumeFeedbackEventId when this Zone is a part of a Swamp. (Inherited from Zone) | |
| ZoneAmplifierEnabledFeedback |
Indicates if zone amplifier is enabled.
This property is not supported by "DmNax4zsp" and "dmNax4zsa50" device classes.
This property will trigger OnZoneChange event with ZoneAmplifierEnabledEventId. | |
| ZoneAmplifierOnFeedback |
Property to indicate if the Amplifier on this Zone is powered or not.
This property is not supported by "DmNax4zsp" and "DmNax4zsa" device classes.
This property will trigger OnZoneChange event with ZoneAmplifierOnEventId. | |
| ZoneConfiguration | Specifies the Configuration of the Zones. Invalid Selections will be ignored. This property is not supported when DmNaxXzsaBase is on an endpoint. Note: This property should be set only when ZoneIsIndependentFeedback is True. | |
| ZoneConfigurationFeedback |
Specifies the configuration of the Zones.
This property will trigger OnZoneChange event with ZoneConfigurationFeedbackEventId. | |
| ZoneConfigurationSupportLevelFeedback |
Specifies the zone configuration support level.
This property is not supported when DmNaxXzsaBase is used as an endpoint.
This property will trigger OnZoneChange event with ZoneConfigurationSupportLevelFeedbackEventId. | |
| ZoneContainedInBusFeedback |
Indicates if this Zones is part of a bus.
This property will trigger OnZoneChange event with ZoneContainedInBusEventId. | |
| ZoneIsIndependentFeedback |
This is based on the current Zones Configuration, and is used to indicate if this Zones is independent or if it is coupled to another zone.
True = Zones is not being controlled by another Zones and is available to be assigned a Logical Zones Id.
False = Zones is being controlled by another Zones and can't be assigned a Logical Zones Id. The ZoneConfigruation value will be ignored in this case.
This property will trigger OnZoneChange event with ZoneIsIndependantEventId. |