Click or drag to resize

MPC3x3XXBase Properties

The MPC3x3XXBase type exposes the following members.

Properties
 NameDescription
Public propertyActiveBrightness Specifies LED brightness level in active state. Valid values range from 0 (0%) to 65535 (100%). This property is not supported by MPC3x30xTouchscreen.
(Inherited from MPC3Basic)
Public propertyActiveBrightnessFeedBack Indicates the LED brightness level in Active State, Valid values range from 0 (0%) to 65535 (100%).

The PanelStateChange event will trigger with ActiveBrightnessEventId.

This property is not supported by MPC3x30xTouchscreen.
(Inherited from MPC3Basic)
Public propertyActiveModeAutoBrightnessHighLevel Specifies active mode auto brightness high level in lux unit. Valid values range from 0 (0%) to 65535 (100%). This property is not supported by MPC3x30xTouchscreen.
(Inherited from MPC3Basic)
Public propertyActiveModeAutoBrightnessHighLevelFeedBack Reports the current active mode auto brightness high level in lux unit. Valid values range from 0 (0%) to 65535 (100%).

The PanelStateChange event will trigger with ActiveModeAutoBrightnessHighLevelEventId.

This property is not supported by MPC3x30xTouchscreen.
(Inherited from MPC3Basic)
Public propertyActiveModeAutoBrightnessLowLevel Specifies active mode auto brightness low level in lux unit. Valid values range from 0 (0%) to 65535 (100%). This property is not supported by MPC3x30xTouchscreen.
(Inherited from MPC3Basic)
Public propertyActiveModeAutoBrightnessLowLevelFeedBack Reports the current active mode auto brightness low level in lux unit. Valid values range from 0 (0%) to 65535 (100%).

The PanelStateChange event will trigger with ActiveModeAutoBrightnessLowLevelEventId.

This property is not supported by MPC3x30xTouchscreen.
(Inherited from MPC3Basic)
Public propertyActiveTimeout Specifies the Active State timeout value in minutes. Value 0: the timeout is disabled. This property is not supported by MPC3x30xTouchscreen.
(Inherited from MPC3Basic)
Public propertyActiveTimeoutFeedBack Indicates Active State timeout value in minutes.

The PanelStateChange event will trigger with ActiveTimeoutEventId.

This property is not supported by MPC3x30xTouchscreen.
(Inherited from MPC3Basic)
Public propertyAmbientLightLevelFeedBack Reports the current ambient light level in lux unit for selecting high LED level vs low LED level. 100-400: normal office, 600: bright lab, 10000+: direct sunlight.

The PanelStateChange event will trigger with AmbientLightLevelEventId.


(Inherited from MPC3Basic)
Public propertyAmbientLightThresholdForAutoBrightnessAdjustment Specifies ambient light level in lux unit for selecting high LED level vs low LED level. This property is only valid when the AutoBrightnessEnabled property is set to true.
(Inherited from MPC3Basic)
Public propertyAmbientLightThresholdForAutoBrightnessAdjustmentFeedBack Reports the current ambient light threshold level in lux unit. This property is only valid when the AutoBrightnessEnabled property is set to true.

The PanelStateChange event will trigger with AmbientLightThresholdForAutoBrightnessAdjustmentEventId.


(Inherited from MPC3Basic)
Public propertyAutoBrightnessDisabled Disable automatic LED brightness adjustment based ambient light while the property is true. Setting the property to false will enable it. This property is currently supported by "MPB4-101" and "MPB4-201" front panel devices.
(Inherited from MPC3Basic)
Public propertyAutoBrightnessDisabledFeedBack When true, indicates automatic LED brightness adjustment based ambient light is disabled on this device.

When False, indicates automatic LED brightness adjustment based ambient light is enabled on this device.

The PanelStateChange event will trigger with AutoBrightnessDisabledEventId.

This property is currently supported by "MPB4-101" and "MPB4-201" front panel devices.


(Inherited from MPC3Basic)
Public propertyAutoBrightnessEnabled Enable automatic LED brightness adjustment based ambient light while the property is true. Setting the property to false will disable it.
(Inherited from MPC3Basic)
Public propertyAutoBrightnessEnabledFeedBack When true, indicates automatic LED brightness adjustment based ambient light is enabled on this device.

When False, indicates automatic LED brightness adjustment based ambient light is disabled on this device.

The PanelStateChange event will trigger with AutoBrightnessEnabledEventId.


(Inherited from MPC3Basic)
Public propertyBooleanInput Collection of Boolean Inputs sent to the device.
(Inherited from BasicTriList)
Public propertyBooleanOutput Collection of Boolean Outputs received from the device.
(Inherited from BasicTriList)
Public propertyButton Get the collection of the Button objects for this device. For MPC3-XXX devices, buttons 2 and 3 are only applicable for the MPC3-201/101/102
(Inherited from MPC3Basic)
Public propertyButton1 Get the Button object corresponding to the Button1 button for this device.

Depreciated for MPC4x102Touchscreen and similar devices. Please use the Button collection instead.


(Inherited from MPC3Basic)
Public propertyButton10 Get the Button object corresponding to the Button10 button for this device.
Public propertyButton2 Get the Button object corresponding to the Button2 button for this device.

Depreciated for MPC4x102Touchscreen and similar devices. Please use the Button collection instead.


(Inherited from MPC3Basic)
Public propertyButton3 Get the Button object corresponding to the Button3 button for this device.

Depreciated for MPC4x102Touchscreen and similar devices. Please use the Button collection instead.


(Inherited from MPC3Basic)
Public propertyButton4 Get the Button object corresponding to the Button4 button for this device.

Depreciated for MPC4x102Touchscreen and similar devices. Please use the Button collection instead.


(Inherited from MPC3Basic)
Public propertyButton5 Get the Button object corresponding to the Button5 button for this device.

Depreciated for MPC4x102Touchscreen and similar devices. Please use the Button collection instead.


(Inherited from MPC3Basic)
Public propertyButton6 Get the Button object corresponding to the Button6 button for this device.

Depreciated for MPC4x102Touchscreen and similar devices. Please use the Button collection instead.


(Inherited from MPC3Basic)
Public propertyButton7 Get the Button object corresponding to the Button7 button for this device.
Public propertyButton8 Get the Button object corresponding to the Button8 button for this device.
Public propertyButton9 Get the Button object corresponding to the Button9 button for this device.
Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from GenericDevice)
Public propertyExtenderSystemReservedSigs Extender that contains basic display settings.
(Inherited from ThreeSeriesTouchScreen)
Public propertyFeedback1 Get the Feedback object corresponding to Button1 for this MPC3Basic device.

Depreciated for MPC4x102Touchscreen and similar devices. Please use the Feedbacks collection instead.


(Inherited from MPC3Basic)
Public propertyFeedback10 Get the Feedback object corresponding to Button10 for this MPC3x3XXBase device.
Public propertyFeedback2 Get the Feedback object corresponding to Button2 for this MPC3Basic device.

Depreciated for MPC4x102Touchscreen and similar devices. Please use the Feedbacks collection instead.


(Inherited from MPC3Basic)
Public propertyFeedback3 Get the Feedback object corresponding to Button3 for this MPC3Basic device.

Depreciated for MPC4x102Touchscreen and similar devices. Please use the Feedbacks collection instead.


(Inherited from MPC3Basic)
Public propertyFeedback4 Get the Feedback object corresponding to Button4 for this MPC3Basic device.

Depreciated for MPC4x102Touchscreen and similar devices. Please use the Feedbacks collection instead.


(Inherited from MPC3Basic)
Public propertyFeedback5 Get the Feedback object corresponding to Button5 for this MPC3Basic device.

Depreciated for MPC4x102Touchscreen and similar devices. Please use the Feedbacks collection instead.


(Inherited from MPC3Basic)
Public propertyFeedback6 Get the Feedback object corresponding to Button6 for this MPC3Basic device.

Depreciated for MPC4x102Touchscreen and similar devices. Please use the Feedbacks collection instead.


(Inherited from MPC3Basic)
Public propertyFeedback7 Get the Feedback object corresponding to Button7 for this MPC3x3XXBase device.
Public propertyFeedback8 Get the Feedback object corresponding to Button8 for this MPC3x3XXBase device.
Public propertyFeedback9 Get the Feedback object corresponding to Button9 for this MPC3x3XXBase device.
Public propertyFeedbackMute Get the Feedback object corresponding to Mute for this MPC3Basic device.
(Inherited from MPC3Basic)
Public propertyFeedbackPower Get the Feedback object corresponding to Power for this MPC3Basic device.
(Inherited from MPC3Basic)
Public propertyFeedbacks Returns the Feedbacks collection
(Inherited from MPC3Basic)
Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyLEDBrightness Specifies the button LED brightness level. Valid values range from 0 (0%) to 65535 (100%).
(Inherited from MPC3Basic)
Public propertyLEDBrightnessFeedBack Indicates the button LED brightness level. Valid values range from 0 (0%) to 65535 (100%).

The PanelStateChange event will trigger with LEDBrightnessEventId.


(Inherited from MPC3Basic)
Public propertyLedBrightnessHighLevel Specifies LED brightness high level in lux unit. Valid values range from 0 (0%) to 65535 (100%).
Public propertyLedBrightnessHighLevelFeedback Reports the current LED brightness high level in lux unit. Valid values range from 0 (0%) to 65535 (100%).

The PanelStateChange event will trigger with LedBrightnessHighLevelEventId.

Public propertyLedBrightnessLowLevel Specifies LED brightness low level in lux unit. Valid values range from 0 (0%) to 65535 (100%).
Public propertyLedBrightnessLowLevelFeedback Reports the current LED brightness low level in lux unit. Valid values range from 0 (0%) to 65535 (100%).

The PanelStateChange event will trigger with LedBrightnessLowLevelEventId.

Public propertyMute Get the Button object corresponding to the Mute button for this device.
(Inherited from MPC3Basic)
Public propertyMuteButtonDisabledFeedBack Property that returns true when the mute button is disabled on this device, false otherwise.

The PanelStateChange event will trigger with MuteButtonDisabledEventId.


(Inherited from MPC3Basic)
Public propertyMuteButtonEnabledFeedBack Property that returns true when the mute button is enabled on this device, false otherwise.

The PanelStateChange event will trigger with MuteButtonEnabledEventId.


(Inherited from MPC3Basic)
Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyNumericalButtonDisabledFeedBack Property to indicate if a numerical button is disabled for a button number on this device.

The PanelStateChange event will trigger with NumericalButtonDisabledEventId.


(Inherited from MPC3Basic)
Public propertyNumericalButtonEnabledFeedBack Property to indicate if a numerical button is enabled for a button number on this device.

The PanelStateChange event will trigger with NumericalButtonEnabledEventId.


(Inherited from MPC3Basic)
Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyPower Get the Button object corresponding to the Power button for this device.
(Inherited from MPC3Basic)
Public propertyPowerButtonDisabledFeedBack Property that returns true when the power button is disabled on this device, false otherwise.

The PanelStateChange event will trigger with PowerButtonDisabledEventId.


(Inherited from MPC3Basic)
Public propertyPowerButtonEnabledFeedBack Property that returns true when the power button is enabled on this device, false otherwise.

The PanelStateChange event will trigger with PowerButtonEnabledEventId.


(Inherited from MPC3Basic)
Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertySmartObjects Collection containing the loaded SmartObjects of this device.
(Inherited from BasicTriListWithSmartObject)
Public propertyStandbyBrightness Specifies LED brightness level in standby state. Valid values range from 0 (0%) to 65535 (100%). This property is not supported by MPC3x30xTouchscreen.
(Inherited from MPC3Basic)
Public propertyStandbyBrightnessFeedBack Indicates the LED brightness level in Standby State. Valid values range from 0 (0%) to 65535 (100%).

The PanelStateChange event will trigger with StandbyBrightnessEventId.

This property is not supported by MPC3x30xTouchscreen.
(Inherited from MPC3Basic)
Public propertyStandbyModeAutoBrightnessHighLevel Specifies standby mode auto brightness high level in lux unit. Valid values range from 0 (0%) to 65535 (100%). This property is not supported by MPC3x30xTouchscreen.
(Inherited from MPC3Basic)
Public propertyStandbyModeAutoBrightnessHighLevelFeedBack Reports the current standby mode auto brightness high level in lux unit. Valid values range from 0 (0%) to 65535 (100%).

The PanelStateChange event will trigger with StandbyModeAutoBrightnessHighLevelEventId.

This property is not supported by MPC3x30xTouchscreen.
(Inherited from MPC3Basic)
Public propertyStandbyModeAutoBrightnessLowLevel Specifies standby mode auto brightness low level in lux unit. Valid values range from 0 (0%) to 65535 (100%). This property is not supported by MPC3x30xTouchscreen.
(Inherited from MPC3Basic)
Public propertyStandbyModeAutoBrightnessLowLevelFeedBack Reports the current standby mode auto brightness low level in lux unit. Valid values range from 0 (0%) to 65535 (100%).

The PanelStateChange event will trigger with StandbyModeAutoBrightnessLowLevelEventId.

This property is not supported by MPC3x30xTouchscreen.
(Inherited from MPC3Basic)
Public propertyStandbyTimeout Specifies the Standby State timeout value in minutes. Value 0: the timeout is disabled. This property is not supported by MPC3x30xTouchscreen.
(Inherited from MPC3Basic)
Public propertyStandbyTimeoutFeedBack Indicates Standby State timeout value in minutes.

The PanelStateChange event will trigger with StandbyTimeoutEventId.

This property is not supported by MPC3x30xTouchscreen.
(Inherited from MPC3Basic)
Public propertyStringInput Collection of String Inputs sent to the device.
(Inherited from BasicTriList)
Public propertyStringOutput Collection of String Outputs received from the device.
(Inherited from BasicTriList)
Public propertyType Property to determine to type of device this is.
(Inherited from GenericDevice)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Public propertyUShortInput Collection of Integer Inputs sent to the device.
(Inherited from BasicTriList)
Public propertyUShortOutput Collection of Integer Outputs received from the device.
(Inherited from BasicTriList)
Public propertyVolume Property to report Volume Level from the Frontpanel. CW rotation increases value, CCW rotation decreases value.

The PanelStateChange event will trigger with VolumeEventId.

Public propertyVolumeBargraph Property to set volume bargraph level on this device. Valid values range from 0 (0%) to 65535 (100%). This property is not supported by MPC3x30xTouchscreen.
(Inherited from MPC3Basic)
Public propertyVolumeClockwiseFeedback Indicates that the Volume knob is turned clockwise. true: Volume knob rotated clockwise, false: Volume knob not rotated clockwise

The PanelStateChange event will trigger with VolumeClockwiseEventId.

Public propertyVolumeControlDisabledFeedBack Indicates that the Volume Control is disabled. true: Volume Control Disabled, false: Volume Control Enabled

The PanelStateChange event will trigger with VolumeControlDisabledEventId.

Public propertyVolumeControlEnabledFeedBack Indicates that the Volume Control is enabled. true: Volume Control Enabled, false: Volume Control Disabled

The PanelStateChange event will trigger with VolumeControlEnabledEventId.

Public propertyVolumeCounterClockwiseFeedback Indicates that the Volume knob is turned counter clockwise. true: Volume knob rotated counter clockwise, false: Volume knob not rotated counter clockwise

The PanelStateChange event will trigger with VolumeCounterClockwiseEventId.

Public propertyVolumeFeedback Property to set the volume level as shown on the Frontpanel.
Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Top
See Also