MPC |
This class will trigger ButtonStateChange and PanelStateChange events.
public class MPC3Basic : ThreeSeriesTouchScreen, IButton, IFeedback
The MPC3Basic type exposes the following members.
| Name | Description | |
|---|---|---|
| ActiveBrightness | Specifies LED brightness level in active state. Valid values range from 0 (0%) to 65535 (100%). This property is not supported by MPC3x30xTouchscreen. | |
| ActiveBrightnessFeedBack |
Indicates the LED brightness level in Active State,
Valid values range from 0 (0%) to 65535 (100%).
The PanelStateChange event will trigger with ActiveBrightnessEventId. This property is not supported by MPC3x30xTouchscreen. | |
| ActiveModeAutoBrightnessHighLevel | Specifies active mode auto brightness high level in lux unit. Valid values range from 0 (0%) to 65535 (100%). This property is not supported by MPC3x30xTouchscreen. | |
| ActiveModeAutoBrightnessHighLevelFeedBack |
Reports the current active mode auto brightness high level in lux unit.
Valid values range from 0 (0%) to 65535 (100%).
The PanelStateChange event will trigger with ActiveModeAutoBrightnessHighLevelEventId. This property is not supported by MPC3x30xTouchscreen. | |
| ActiveModeAutoBrightnessLowLevel | Specifies active mode auto brightness low level in lux unit. Valid values range from 0 (0%) to 65535 (100%). This property is not supported by MPC3x30xTouchscreen. | |
| ActiveModeAutoBrightnessLowLevelFeedBack |
Reports the current active mode auto brightness low level in lux unit.
Valid values range from 0 (0%) to 65535 (100%).
The PanelStateChange event will trigger with ActiveModeAutoBrightnessLowLevelEventId. This property is not supported by MPC3x30xTouchscreen. | |
| ActiveTimeout | Specifies the Active State timeout value in minutes. Value 0: the timeout is disabled. This property is not supported by MPC3x30xTouchscreen. | |
| ActiveTimeoutFeedBack |
Indicates Active State timeout value in minutes.
The PanelStateChange event will trigger with ActiveTimeoutEventId. This property is not supported by MPC3x30xTouchscreen. | |
| AmbientLightLevelFeedBack |
Reports the current ambient light level in lux unit for selecting high LED level vs low LED level.
100-400: normal office, 600: bright lab, 10000+: direct sunlight.
The PanelStateChange event will trigger with AmbientLightLevelEventId. | |
| AmbientLightThresholdForAutoBrightnessAdjustment | Specifies ambient light level in lux unit for selecting high LED level vs low LED level. This property is only valid when the AutoBrightnessEnabled property is set to true. | |
| AmbientLightThresholdForAutoBrightnessAdjustmentFeedBack |
Reports the current ambient light threshold level in lux unit.
This property is only valid when the AutoBrightnessEnabled property is set to true.
The PanelStateChange event will trigger with AmbientLightThresholdForAutoBrightnessAdjustmentEventId. | |
| AutoBrightnessDisabled | Disable automatic LED brightness adjustment based ambient light while the property is true. Setting the property to false will enable it. This property is currently supported by "MPB4-101" and "MPB4-201" front panel devices. | |
| AutoBrightnessDisabledFeedBack |
When true, indicates automatic LED brightness adjustment based ambient light is disabled on this device.
When False, indicates automatic LED brightness adjustment based ambient light is enabled on this device. The PanelStateChange event will trigger with AutoBrightnessDisabledEventId. This property is currently supported by "MPB4-101" and "MPB4-201" front panel devices. | |
| AutoBrightnessEnabled | Enable automatic LED brightness adjustment based ambient light while the property is true. Setting the property to false will disable it. | |
| AutoBrightnessEnabledFeedBack |
When true, indicates automatic LED brightness adjustment based ambient light is enabled on this device.
When False, indicates automatic LED brightness adjustment based ambient light is disabled on this device. The PanelStateChange event will trigger with AutoBrightnessEnabledEventId. | |
| BooleanInput |
Collection of Boolean Inputs sent to the device.
(Inherited from BasicTriList) | |
| BooleanOutput |
Collection of Boolean Outputs received from the device.
(Inherited from BasicTriList) | |
| Button | Get the collection of the Button objects for this device. For MPC3-XXX devices, buttons 2 and 3 are only applicable for the MPC3-201/101/102 | |
| Button1 |
Get the Button object corresponding to the Button1 button
for this device.
Depreciated for MPC4x102Touchscreen and similar devices. Please use the Button collection instead. | |
| Button2 |
Get the Button object corresponding to the Button2 button
for this device.
Depreciated for MPC4x102Touchscreen and similar devices. Please use the Button collection instead. | |
| Button3 |
Get the Button object corresponding to the Button3 button
for this device.
Depreciated for MPC4x102Touchscreen and similar devices. Please use the Button collection instead. | |
| Button4 |
Get the Button object corresponding to the Button4 button
for this device.
Depreciated for MPC4x102Touchscreen and similar devices. Please use the Button collection instead. | |
| Button5 |
Get the Button object corresponding to the Button5 button
for this device.
Depreciated for MPC4x102Touchscreen and similar devices. Please use the Button collection instead. | |
| Button6 |
Get the Button object corresponding to the Button6 button
for this device.
Depreciated for MPC4x102Touchscreen and similar devices. Please use the Button collection instead. | |
| ConnectedIpList |
A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID.
This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null.
If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected.
The order of items in this list is not guaranteed.
(Inherited from GenericDevice) | |
| Description |
Get/Set the description of this device.
(Inherited from GenericBase) | |
| Disposed |
Property to indicate if the device has been disposed.
(Inherited from GenericDevice) | |
| ExtenderSystemReservedSigs |
Extender that contains basic display settings.
(Inherited from ThreeSeriesTouchScreen) | |
| Feedback1 |
Get the Feedback object corresponding to Button1 for this MPC3Basic device.
Depreciated for MPC4x102Touchscreen and similar devices. Please use the Feedbacks collection instead. | |
| Feedback2 |
Get the Feedback object corresponding to Button2 for this MPC3Basic device.
Depreciated for MPC4x102Touchscreen and similar devices. Please use the Feedbacks collection instead. | |
| Feedback3 |
Get the Feedback object corresponding to Button3 for this MPC3Basic device.
Depreciated for MPC4x102Touchscreen and similar devices. Please use the Feedbacks collection instead. | |
| Feedback4 |
Get the Feedback object corresponding to Button4 for this MPC3Basic device.
Depreciated for MPC4x102Touchscreen and similar devices. Please use the Feedbacks collection instead. | |
| Feedback5 |
Get the Feedback object corresponding to Button5 for this MPC3Basic device.
Depreciated for MPC4x102Touchscreen and similar devices. Please use the Feedbacks collection instead. | |
| Feedback6 |
Get the Feedback object corresponding to Button6 for this MPC3Basic device.
Depreciated for MPC4x102Touchscreen and similar devices. Please use the Feedbacks collection instead. | |
| FeedbackMute | Get the Feedback object corresponding to Mute for this MPC3Basic device. | |
| FeedbackPower | Get the Feedback object corresponding to Power for this MPC3Basic device. | |
| Feedbacks | Returns the Feedbacks collection | |
| ID |
Property to get the ID of the device.
(Inherited from GenericDevice) | |
| IsOnline |
Property to get the current online state of the device.
(Inherited from GenericDevice) | |
| LEDBrightness | Specifies the button LED brightness level. Valid values range from 0 (0%) to 65535 (100%). | |
| LEDBrightnessFeedBack |
Indicates the button LED brightness level.
Valid values range from 0 (0%) to 65535 (100%).
The PanelStateChange event will trigger with LEDBrightnessEventId. | |
| Mute | Get the Button object corresponding to the Mute button for this device. | |
| MuteButtonDisabledFeedBack |
Property that returns true when the mute button is disabled on this device, false otherwise.
The PanelStateChange event will trigger with MuteButtonDisabledEventId. | |
| MuteButtonEnabledFeedBack |
Property that returns true when the mute button is enabled on this device, false otherwise.
The PanelStateChange event will trigger with MuteButtonEnabledEventId. | |
| Name |
Get the name of this device.
(Inherited from GenericBase) | |
| NumericalButtonDisabledFeedBack |
Property to indicate if a numerical button is disabled for a button number on this device.
The PanelStateChange event will trigger with NumericalButtonDisabledEventId. | |
| NumericalButtonEnabledFeedBack |
Property to indicate if a numerical button is enabled for a button number on this device.
The PanelStateChange event will trigger with NumericalButtonEnabledEventId. | |
| Parent |
The parent that a given object was added to.
(Inherited from GenericBase) | |
| Power | Get the Button object corresponding to the Power button for this device. | |
| PowerButtonDisabledFeedBack |
Property that returns true when the power button is disabled on this device, false otherwise.
The PanelStateChange event will trigger with PowerButtonDisabledEventId. | |
| PowerButtonEnabledFeedBack |
Property that returns true when the power button is enabled on this device, false otherwise.
The PanelStateChange event will trigger with PowerButtonEnabledEventId. | |
| Registerable |
Property to indicate that this device can be registered.
(Inherited from GenericDevice) | |
| Registered |
Property to get the current registration state of the device.
(Inherited from GenericDevice) | |
| RegistrationFailureReason |
Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice) | |
| SIMPLDeviceImplementation |
Internal protected member used for actual device control.
(Inherited from GenericDevice) | |
| SmartObjects |
Collection containing the loaded SmartObjects of this device.
(Inherited from BasicTriListWithSmartObject) | |
| StandbyBrightness | Specifies LED brightness level in standby state. Valid values range from 0 (0%) to 65535 (100%). This property is not supported by MPC3x30xTouchscreen. | |
| StandbyBrightnessFeedBack |
Indicates the LED brightness level in Standby State.
Valid values range from 0 (0%) to 65535 (100%).
The PanelStateChange event will trigger with StandbyBrightnessEventId. This property is not supported by MPC3x30xTouchscreen. | |
| StandbyModeAutoBrightnessHighLevel | Specifies standby mode auto brightness high level in lux unit. Valid values range from 0 (0%) to 65535 (100%). This property is not supported by MPC3x30xTouchscreen. | |
| StandbyModeAutoBrightnessHighLevelFeedBack |
Reports the current standby mode auto brightness high level in lux unit.
Valid values range from 0 (0%) to 65535 (100%).
The PanelStateChange event will trigger with StandbyModeAutoBrightnessHighLevelEventId. This property is not supported by MPC3x30xTouchscreen. | |
| StandbyModeAutoBrightnessLowLevel | Specifies standby mode auto brightness low level in lux unit. Valid values range from 0 (0%) to 65535 (100%). This property is not supported by MPC3x30xTouchscreen. | |
| StandbyModeAutoBrightnessLowLevelFeedBack |
Reports the current standby mode auto brightness low level in lux unit.
Valid values range from 0 (0%) to 65535 (100%).
The PanelStateChange event will trigger with StandbyModeAutoBrightnessLowLevelEventId. This property is not supported by MPC3x30xTouchscreen. | |
| StandbyTimeout | Specifies the Standby State timeout value in minutes. Value 0: the timeout is disabled. This property is not supported by MPC3x30xTouchscreen. | |
| StandbyTimeoutFeedBack |
Indicates Standby State timeout value in minutes.
The PanelStateChange event will trigger with StandbyTimeoutEventId. This property is not supported by MPC3x30xTouchscreen. | |
| StringInput |
Collection of String Inputs sent to the device.
(Inherited from BasicTriList) | |
| StringOutput |
Collection of String Outputs received from the device.
(Inherited from BasicTriList) | |
| Type |
Property to determine to type of device this is.
(Inherited from GenericDevice) | |
| UnRegistrationFailureReason |
Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice) | |
| UserSpecifiedObject |
Can be assigned anything that user wants.
(Inherited from GenericBase) | |
| UShortInput |
Collection of Integer Inputs sent to the device.
(Inherited from BasicTriList) | |
| UShortOutput |
Collection of Integer Outputs received from the device.
(Inherited from BasicTriList) | |
| VolumeBargraph | Property to set volume bargraph level on this device. Valid values range from 0 (0%) to 65535 (100%). This property is not supported by MPC3x30xTouchscreen. | |
| XioEndpointStubSIMPLDevice |
The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the
correct place in hierarchy.
(Inherited from GenericDevice) |
| Name | Description | |
|---|---|---|
| DisableMuteButton | Disable the mute button on this device. | |
| DisableNumericalButton | Disable a given numerical button on this device. | |
| DisablePowerButton | Disable the power button on this device. | |
| DisableVolumeDownButton | Disable the volume down button on this device. | |
| DisableVolumeUpButton | Disable the volume up button on this device. | |
| Dispose |
Clean up of resources.
(Inherited from GenericBase) | |
| Dispose(Boolean) |
Method to perform the actual disposing of the device.
(Inherited from GenericDevice) | |
| EnableMuteButton | Enable the mute button on this device. | |
| EnableNumericalButton | Enable a given numerical button on this device. | |
| EnablePowerButton | Enable the power button on this device. | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| Finalize |
Destructor of the device.
(Inherited from GenericDevice) | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| LoadSmartObjects(ISmartObject) |
Load the smart objects to this device that are already loaded for the specified device.
(Inherited from BasicTriListWithSmartObject) | |
| LoadSmartObjects(Stream) |
Load a smart object given a reference to a stream for the SGD file.
(Inherited from BasicTriListWithSmartObject) | |
| LoadSmartObjects(String) |
Load a smart object given a SGD Filename with an absolute path.
(Inherited from BasicTriListWithSmartObject) | |
| MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) | |
| OnBaseEvent(Int32) |
Protected member used to fire the BaseEvent with the default extended information.
(Inherited from GenericBase) | |
| OnBaseEvent(Int32, UInt16) |
Protected member used to fine the BaseEvent with extended event information.
(Inherited from GenericBase) | |
| Register |
Register this device with the system.
(Inherited from GenericDevice) | |
| ToString |
Return the name of the device.
(Inherited from GenericDevice) | |
| UnRegister |
Unregister this device with the system. This function can not be called from the device's own SigChange event handler.
On successful unregistration, if this device supports the OnlineStatusChange event, it will trigger indicating the device when offline. (Inherited from GenericDevice) |
| Name | Description | |
|---|---|---|
| BaseEvent |
Generic base event, triggered when the there are no other handlers available
for a specific EventID.
(Inherited from GenericBase) | |
| ButtonStateChange | Event fired when a button state change was received from the device. | |
| IpInformationChange |
Event that tells what IP Address is connected/disconnected from an IP ID for a non-UDP device.
This is only valid for an Ethernet device. An exception will be thrown if it is not.
(Inherited from GenericDevice) | |
| OnlineStatusChange |
Event triggered when the Online status of the device changes.
(Inherited from GenericDevice) | |
| PanelStateChange | Event fired when a panel state change was received from the device. | |
| SigChange |
Event triggered when cue information is received from a device.
When processing this event, it will hold off other cues from being received from the device.
If one desires to continue processing the data and receive more information, launch a new thread
and allow this event to exit.
(Inherited from BasicTriList) |