Click or drag to resize

ZumJBoxSwitchLoad Properties

The ZumJBoxSwitchLoad type exposes the following members.

Properties
 NameDescription
Public propertyDebugFeedback Property to display debug messages related to fault conditions. This property is supported by GL-EXP-SW-CN device only.

The LoadStateChange event will trigger with SerialDebugFeedbackEventId.


(Inherited from SwitchedLoad)
Public propertyDelayedOffFeedback Property to report the turn off relay after the delay specified by the DelayedOffTimeout.

This property will trigger LoadStateChange event with DelayedOffEventId.

Public propertyDelayedOffTimeout Sets the delay time prior to turning the load off when performing a relay delayed off operation.

Default value is 0 second.

Valid range from 0 second(no delay) to 65535 seconds.

Public propertyDelayedOffTimeoutFeedback Property to report the delay time prior to turning the load off when performing a relay delayed off operation.

Default value is 0 seconds.

Valid range from 0 seconds(no delay) to 65535 seconds.

This property will trigger LoadStateChange event with DelayedOffTimeoutFeedbackEventId.

Public propertyDeviceLoadIsOn Property to Get the lighting device this load is on.
(Inherited from SwitchedLoad)
Public propertyErrorFeedback Property to display Load status and errors: Valid values: 0x0000 = Normal This property is supported by GL-EXP-SW-CN device and Horizon EX Swtiches.

The LoadStateChange event will trigger with ErrorEventId.


(Inherited from SwitchedLoad)
Public propertyInExternalOverrideFeedback Indicates if the device is in external override mode. True = In external override; False = External override released This property is not supported by ZumLinkDtQuattroDlsRly, ZumLinkIrQuattroDlsRly, ZumLinkIrQuattroHdDlsRly, ZumLinkUsHallwayDlsRly, ZumLinkUsOnewayDlsRly and ZumLinkUsQuattroDlsRly devices.

The OverrideEventHandler event will trigger with External.


(Inherited from ZumJBoxSwitchLoadBase)
Public propertyInManualOverrideFeedback Indicates if the device is in manual override mode. True = In manual override; False = Manual override released This property is not supported by ZumLinkDtQuattroDlsRly, ZumLinkIrQuattroDlsRly, ZumLinkIrQuattroHdDlsRly, ZumLinkUsHallwayDlsRly, ZumLinkUsOnewayDlsRly, ZumLinkUsQuattroDlsRly, ZumLinkJbox20APlug and "ZumNetJBoxDaliGroups" and "ZumNetDinDaliGroups" devices.

The OverrideEventHandler event will trigger with Manual.


(Inherited from ZumJBoxSwitchLoadBase)
Public propertyIsOn Property to determine if the load is on.

The LoadStateChange event will trigger with IsOnEventId.


(Inherited from SwitchedLoad)
Public propertyLoadShedEnable This property is to enter load into the loadshed state and set the light level to defined value. true: to enter the load into loadshed state; false: to bring the load out of loadshed state.
(Inherited from ZumJBoxSwitchLoadBase)
Public propertyLoadShedEnabledFeedback This property is to indicate that dimmer is in loadshed state. true: dimmer is in loadshed state: false: dimmer is not in loadshed state.

This property will trigger LoadStateChange event with LoadShedEnabledFeedbackEventId.


(Inherited from ZumJBoxSwitchLoadBase)
Public propertyLoadshedLevel This property sets the loadshed level to defined value.
(Inherited from ZumJBoxSwitchLoadBase)
Public propertyLoadshedLevelFeedback This property reports Load shed level feedback.

This property will trigger LoadStateChange with LoadShedLevelFeedbackEventId.


(Inherited from ZumJBoxSwitchLoadBase)
Public propertyNumber Number of this load.
(Inherited from SwitchedLoad)
Public propertyOverrideDisabledFeedbackObsolete.
This property is to indicate that override mode is disabled. True: relay ignores the override mode: False: relay override mode is enabled.

This property will trigger LoadStateChange event with OverrideDisabledEventId.


(Inherited from ZumJBoxSwitchLoadBase)
Public propertyOverrideLevel This property sets the Override level to defined value. This property is not supported by ZumLinkDtQuattroDlsRly, ZumLinkIrQuattroDlsRly, ZumLinkIrQuattroHdDlsRly, ZumLinkUsHallwayDlsRly, ZumLinkUsOnewayDlsRly, ZumLinkUsQuattroDlsRly, ZumLinkJbox20APlug and "ZumNetJBoxDaliGroups" and "ZumNetDinDaliGroups" devices.
(Inherited from ZumJBoxSwitchLoadBase)
Public propertyOverrideLevelFeedback This property reports override level feedback. This property is not supported by ZumLinkDtQuattroDlsRly, ZumLinkIrQuattroDlsRly, ZumLinkIrQuattroHdDlsRly, ZumLinkUsHallwayDlsRly, ZumLinkUsOnewayDlsRly, ZumLinkUsQuattroDlsRly, ZumLinkJbox20APlug and "ZumNetJBoxDaliGroups" and "ZumNetDinDaliGroups" devices.

This property will trigger LoadStateChange with OverrideLevelFeedbackEventId.


(Inherited from ZumJBoxSwitchLoadBase)
Public propertyParent The parent that a this load is added to.
(Inherited from LightLoad)
Public propertySceneActiveFeedback This property is to indicate that the desired saved scene level. (This will be for scene X = 1 to 16)

This property will trigger LoadStateChange event with SceneActiveFeedbackEventId.

Public propertySceneLevel This property sets the custom scene level from 0 to 100 percentage. Scene is from 1 to 16. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage
Public propertySceneLevelFeedback This property reports the scene level setting during device update request. Scene is from 1 to 16. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage

This property will trigger LoadStateChange event with SceneLevelFeedbackEventId.

Public propertySceneSetUnaffected This property is to set bitmask of scenes that are not affected when scene recall is triggered.
Public propertySceneUnaffectedFeedback This property reports the bitmask of scenes that are not affected when scene recall is triggered.

This property will trigger LoadStateChange event with SceneUnaffectedFeedbackEventId.

Public propertyType Type of load this object represents.
(Inherited from SwitchedLoad)
Public propertyUserSpecifiedObject Object holder for any use by the programmer.
(Inherited from LightLoad)
Top
See Also