Click or drag to resize

ZumJBoxDimLoadBase Properties

The ZumJBoxDimLoadBase type exposes the following members.

Properties
 NameDescription
Public propertyCycleDim Toggles between a raise and lower operation as follows: If load is Off or at the Min level, the load will raise. If load is at the Max level, the load will lower. At any other level, the load will change in the opposite direction of the last ramp (see raise/lower descriptions).
(Inherited from LDimmingLoad)
Public propertyDayLevelValue Property to set the day level value. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.
Public propertyDayLevelValueFeedback Property to report day level value. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.

This property will trigger LoadStateChange event with DayLevelValueFeedbackEventId.

Public propertyDaylightingGainAdjust Property to set the day lighting gain adjust. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.
Public propertyDaylightingGainAdjustFeedback Property to report day lighting gain adjust. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.

This property will trigger LoadStateChange event with DaylightingGainAdjustFeedbackEventId.

Public propertyDaylightingIsBusyFeedback This property indicates that daylighting is in busy state. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.

This property will trigger LoadStateChange event with DaylightingIsBusyFeedbackEventId.

Public propertyDaylightingLevelIsChangingFeedback This property indicates that daylighting level is changing state. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.

This property will trigger LoadStateChange event with DaylightingLevelIsChangingFeedbackEventId.

Public propertyDaylightingMinimumLevel Property to set the day lighting minimum level. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.
Public propertyDaylightingMinimumLevelFeedback Property to report day lighting minimum level. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.

This property will trigger LoadStateChange event with DaylightingMinimumLevelFeedbackEventId.

Public propertyDaylightingOperatingMode Property to set the day lighting operating mode. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.
Public propertyDaylightingOperatingModeFeedback Property to report day lighting operating mode. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.

This property will trigger LoadStateChange event with DaylightingOperatingModeFeedbackEventId.

Public propertyDaylightingResponseTime Property to set the day lighting response time. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.
Public propertyDaylightingResponseTimeFeedback Property to report day lighting response time. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.

This property will trigger LoadStateChange event with DaylightingResponseTimeFeedbackEventId.

Public propertyDaylightingSceneIsSavingFeedback This property indicates that daylighting scene is in saving state. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.

This property will trigger LoadStateChange event with DaylightingSceneIsSavingFeedbackEventId.

Public propertyDaylightingSensitivityAdjust Property to set day lighting sensitivity adjust value. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.
Public propertyDaylightingSensitivityAdjustFeedback Property to report day lighting sensitivity adjust. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.

This property will trigger LoadStateChange event with DaylightingSensitivityAdjustFeedbackEventId.

Public propertyDaylightingSuspend Property to suspend daylighting. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.
Public propertyDaylightingSyncToPhotoSensor Property to synchronize the daylighting with the photo sensor. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.
Public propertyDaylightIntercept Property to set the day light intercept value.
Public propertyDaylightInterceptFeedback Property to report day light intercept values.

This property will trigger LoadStateChange event with DaylightInterceptFeedbackEventId.

Public propertyDaylightPhotoSensorIn This property is used to inject the current photo sensor level to perform daylighting.
Public propertyDaylightSlope This property is to set the slope of daylighting curve. This value is referenced as a floating point value but entered as a decimal number divided by 1,000. Example: 1.234 is input as 1234. The theoretical limit to this join ranges from 0.0 to 25.000. Valid values range from 0000 to 25000.
Public propertyDaylightSlopeFeedback This property is to return the current slope of daylighting curve.

This property will trigger LoadStateChange event with DaylightSlopeFeedbackEventId.

Public propertyDayligthIntercept This property is to set the y-intercept of the daylighting curve. This value is referenced internally as a floating point value but entered as a decimal number divided by 100. Example: 123,400 is input as 1234. The theoretical limit to this join ranges from 100 to 6,553,500. Valid values range from 0d to 65535.
Public propertyDayligthInterceptFeedback This property is to return the current Daylight Intercept.

This property will trigger LoadStateChange event with DayligthInterceptFeedbackEventId.

Public propertyDayPhotoValue Property to set the day photo value. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.
Public propertyDayPhotoValueFeedback Property to report day photo value. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.

This property will trigger LoadStateChange event with DayPhotoValueFeedbackEventId.

Public propertyDelayedOffFeedback Indicates that a local or slave button press has triggered a delayed fade of the lights to full off. This property is not supported by ZumNetJBoxDaliGroups and ZumLinkExp16ADimu.
(Inherited from BasicDimmingLoad)
Public propertyDeviceLoadIsOn Property to Get the lighting device this load is on.
(Inherited from DimmingLoad)
Public propertyDimmerFaultFeedback Property to return the load status and errors.

This property will trigger LoadStateChange event with DimmerFaultFeedbackEventId.

This property is supported by ZumLinkExp16ADimu class only.
Public propertyDimmerPhaseMode This property is to set the dimmer phase mode. This property is supported by ZumLinkExp16ADimu class only.
Public propertyDimmerPhaseModeFeedback Property to return the current dimmer phase mode.

This property will trigger LoadStateChange event with DimmerPhaseModeFeedbackEventId.

This property is supported by ZumLinkExp16ADimu class only.
Public propertyFastFullOnFeedback Indicates that a local or slave button press has triggered a fast fade of the lights to full on. This property is not supported by ZumNetJBoxDaliGroups and ZumLinkExp16ADimu.
(Inherited from BasicDimmingLoad)
Public propertyInDaylightingCalibrationFeedback This property indicates that daylight calibration process started.

This property will trigger LoadStateChange event with InDaylightingCalibrationFeedbackEventId.

Public propertyInExternalOverrideFeedback Indicates if the device is in external override mode.

The OverrideEventHandler event will trigger with External.

Public propertyInManualOverrideFeedback Indicates if the device is in manual override mode.

The OverrideEventHandler event will trigger with Manual.

Public propertyIsFullOnFeedback Indicates that the load is currently at the max level defined by the DimmerMaxLevel parameter.
(Inherited from BasicDimmingLoad)
Public propertyIsOn Indicates that the load is on at any level.
(Inherited from LDimmingLoad)
Public propertyLevel Property to set the level of the load.
(Inherited from DimmingLoad)
Public propertyLevelFeedback Property to get the level of the load when it changes due to a local buttons press, or a input such as Raise or Lower. This will not change in response to a value being set by the Level property.
(Inherited from DimmingLoad)
Public propertyLoadShedEnable This property is to enter load into the loadshed state and set the light level to defined value. true: to enter the load into loadshed state; false: to bring the load out of loadshed state.
Public propertyLoadShedEnabledFeedback This property is to indicate that dimmer is in loadshed state. true: dimmer is in loadshed state: false: dimmer is not in loadshed state.

This property will trigger LoadStateChange event with LoadShedEnabledFeedbackEventId.

Public propertyLoadShedLevel This propety is to set the loadshed target level. Minimum is 0 and maximum is 65535.
Public propertyLoadShedLevelFeedback This property reports the load shed target level which is between 0-65535.

This property will trigger LoadStateChange event with LoadShedLevelFeedbackEventId.

Public propertyLower Smoothly lowers the light level from its current level to the min level for as long as the property is set 'true'. The ramping operation continues until the light reaches the min level or until the property is set 'false'.
(Inherited from LDimmingLoad)
Public propertyLowerFeedback Indicates that the light level is being lowered due to a local or slave button press. This property is not supported by ZumLinkJBox16ALv, ZumNetJBox16ALv, ZumLinkExp16ADimu and ZumNetJBoxDaliGroups.
(Inherited from BasicDimmingLoad)
Public propertyMaximumLevel This property is to set maximum range level 55% to 100%. That is 36044-65535. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyMaximumLevelFeedback This property reports the maximum level of the dimmer which is between 36044-65535.

This property will trigger LoadStateChange event with MaximumLevelFeedbackEventId.

Public propertyMinimumLevel This property is to set minimum range level 0% to 45%. That is 0-29491. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage.
Public propertyMinimumLevelFeedback This property reports the minimum level of the dimmer which is between 0-29491.

This property will trigger LoadStateChange event with MinimumLevelFeedbackEventId.

Public propertyNightLevelValue Property to set night level value. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.
Public propertyNightLevelValueFeedback Property to report night level value. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.

This property will trigger LoadStateChange event with NightLevelValueFeedbackEventId.

Public propertyNightPhotoValue Property to set the night photo value. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.
Public propertyNightPhotoValueFeedback Property to report night photo value. This property is not currently supported by ZUMLINK-DIN-16A-LV, ZUMNET-DIN-16A-LV, ZUMLINK-DIN-DIMU and ZUMLINK-DIN-DLI-GROUPS devices.

This property will trigger LoadStateChange event with NightPhotoValueFeedbackEventId.

Public propertyNumber Number of this load.
(Inherited from DimmingLoad)
Public propertyOffFadeTime This property is to set the off fade time. Minimum is 0.25 seconds and maximum is 10 seconds. E.g To set to 0.25 seconds the value should be 25. Use the SecondsToUshort(Single) to convert the seconds to a ushort value or the UshortToSeconds(UInt16) to convert the ushort value to seconds.
Public propertyOffFadeTimeFeedback This property reports the off fade time of the dimmer which is between 0.25 seconds to 10 seconds. E.g Value is 25 to represent the 0.25 seconds. Use the SecondsToUshort(Single) to convert the seconds to a ushort value or the UshortToSeconds(UInt16) to convert the ushort value to seconds.

This property will trigger LoadStateChange event with OffFadeTimeFeedbackEventId.

Public propertyOffFeedback Indicates that the lights have faded to full off (0%) due to a local or slave button press. This property is not supported by ZumNetJBoxDaliGroups and ZumLinkExp16ADimu.
(Inherited from BasicDimmingLoad)
Public propertyOnFadeTime This property is to set the on fade time. Minimum is 0.25 seconds and maximum is 10 seconds. E.g To set to 0.25 seconds the value should be 25. Use the SecondsToUshort(Single) to convert the seconds to a ushort value or the UshortToSeconds(UInt16) to convert the ushort value to seconds.
Public propertyOnFadeTimeFeedback This property reports the on fade time of the dimmer which is between 0.25 seconds to 10 seconds. E.g Value is 25 to represent the 0.25 seconds. Use the SecondsToUshort(Single) to convert the seconds to a ushort value or the UshortToSeconds(UInt16) to convert the ushort value to seconds.

This property will trigger LoadStateChange event with OnFadeTimeFeedbackEventId.

Public propertyOverrideLevel This propety is to set the override target level. Minimum is 0 and maximum is 65535.
Public propertyOverrideLevelFeedback This property reports the override target level which is between 0-65535.

This property will trigger LoadStateChange event with OverrideLevelFeedbackEventId.

Public propertyParent The parent that a this load is added to.
(Inherited from LightLoad)
Public propertyPresetFadeTime This property is to set the preset fade time. Minimum is 0.25 seconds and maximum is 10 seconds. E.g To set to 0.25 seconds the value should be 25. Use the SecondsToUshort(Single) to convert the seconds to a ushort value or the UshortToSeconds(UInt16) to convert the ushort value to seconds.
Public propertyPresetFadeTimeFeedback This property reports the preset fade time of the dimmer which is between 0.25 seconds to 10 seconds. E.g Value is 25 to represent the 0.25 seconds. Use the SecondsToUshort(Single) to convert the seconds to a ushort value or the UshortToSeconds(UInt16) to convert the ushort value to seconds.

This property will trigger LoadStateChange event with PresetFadeTimeFeedbackEventId.

Public propertyPresets Collection of the presets available on this load. This property is not supported by "ClsC6", "ClsC6M", Horizon dimmers, "ZumNetJBoxDaliGroups" and all ZUM devices with loads.
(Inherited from DimmingLoad)
Public propertyRaise Smoothly raises the light level from its current level to 100% (max level) for as long as the property is set 'true'. The ramping operation continues until the light reaches 100% (max level) or until the property is set 'false'.
(Inherited from LDimmingLoad)
Public propertyRaiseFeedback Indicates that the light level is being raised due to a local or slave button press. This property is not supported by ZumLinkJBox16ALv, ZumNetJBox16ALv, ZumLinkExp16ADimu and ZumNetJBoxDaliGroups.
(Inherited from BasicDimmingLoad)
Public propertyRaiseLowerRate This property is to set the raise lower rate. Minimum is 0.25 seconds and maximum is 10 seconds. E.g To set to 0.25 seconds the value should be 25. Use the SecondsToUshort(Single) to convert the seconds to a ushort value or the UshortToSeconds(UInt16) to convert the ushort value to seconds.
Public propertyRaiseLowerRateFeedback This property reports the raise lower rate of the dimmer which is between 0.25 seconds to 10 seconds. E.g Value is 25 to represent the 0.25 Seconds Use the SecondsToUshort(Single) to convert the seconds to a ushort value or the UshortToSeconds(UInt16) to convert the ushort value to seconds.

This property will trigger LoadStateChange event with RaiseLowerRateFeedbackEventId.

Public propertySceneActiveFeedback This property is to indicate that the desired saved scene level. (This will be for scene X = 1 to 17)

This property will trigger LoadStateChange event with SceneActiveFeedbackEventId.

Public propertySceneLevel This property sets the custom scene level from 0 to 100 percentage. Scene is from 1 to 17. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage
Public propertySceneLevelFeedback This property reports the scene level setting during device update request. Scene is from 1 to 17. Use PercentToUshort(Single) to convert the percentage to a ushort value or UshortToPercent(UInt16) to convert the ushort value to percentage

This property will trigger LoadStateChange event with SceneLevelFeedbackEventId.

Public propertySceneSetUnaffected This property is to set bitmask of scenes that are not affected when scene recall is triggered.
Public propertySceneUnaffectedFeedback This property reports the bitmask of scenes that are not affected when scene recall is triggered.

This property will trigger LoadStateChange event with SceneUnaffectedFeedbackEventId.

Public propertyType Type of load this object represents.
(Inherited from DimmingLoad)
Public propertyUserSpecifiedObject Object holder for any use by the programmer.
(Inherited from LightLoad)
Public propertyZeroCrossMode This property is to set the dimmer zero cross mode. This property is supported by ZumLinkExp16ADimu class only.
Public propertyZeroCrossModeFeedback Property to report the dimmer's Zero Cross mode.

This property will trigger LoadStateChange event with ZeroCrossModeFeedbackEventId.

This property is supported by ZumLinkExp16ADimu class only.
Top
See Also