Zum |
The ZumNetBridgeRoomZumWiredRoomInterface type exposes the following members.
| Name | Description | |
|---|---|---|
| ActivateScene | This method triggers the load to ramp to the desired saved scene levels. (This will be for scene X = 1 to 16). | |
| CancelUpdate | Method to cancel the update. | |
| ClearRoomConfigurationChanged | Method to clear the RoomConfigurationChangedFeedback property value. | |
| DisableAlternateOccupancyVacancyScenes | Method to disable the alternate occupancy and vacancy scenes. | |
| DisableAutoOffTimer | Method to disable the auto off timer. | |
| DisableDaylighting | Method to disable daylighting. | |
| DisableLocalScheduling | Method to disable local scheduling on this room. | |
| DisableOccupancySensor | Method to disable occupancy sensor. | |
| DisableRoomDeviceFeedback | Method to disable room device feedback. | |
| DisableVicinityBinding | Method to disable the vicinity occupancy binding logic. | |
| EnableAlternateOccupancyVacancyScenes |
Method to enable the alternate occupancy and vacancy scenes.
Allowing a second set of Occupied and Vacant illumination values. Perhaps to be used when the space is being maintained rather than for its normal use. | |
| EnableAutoOffTimer |
Method to enable the auto off timer.
When enabled, turning lights on starts a timer. Room will turn lights off when timer expires. Timer is retrigger-able by any event that would turn a light on. Ex. Occupancy sensor. Room flashes lights for "10 minutes" warning. Time in minutes | |
| EnableLocalScheduling | Method to enable local scheduling on this room. | |
| EnableOccupancySensor | Method to enable occupancy sensor. | |
| EnableRoomDeviceFeedback | Method to enable room device feedback. | |
| EnableVicinityBinding |
Method to enable the vicinity occupancy binding logic.
Vicinity Binding refers to the load controller using a third Occupancy/Vacancy sensor input. Rather than Occupied or Vacant, Vicinity will mean someone is nearby (in the vicinity). When enabled, the load controller can use this input to determine that someone its zone is unoccupied, but someone is in a nearby zone. The load controller can then choose to turn on at a lower level, just to provide a feeling that there is not a wall of darkness surrounding the occupant. In some films you see corridors where the illumination follows the characters as they walk, the ones at the extreme end of that corridor of light will be triggered by their vicinity sensors rather than direct occupation. | |
| EnterManualOverride | Enter manual override mode. | |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) | |
| ExitManualOverride | Exit manual override mode. | |
| GetAlertList | Method to get the DeviceAlertsFeedback property value. | |
| GetHashCode | Serves as the default hash function. (Inherited from Object) | |
| GetType | Gets the Type of the current instance. (Inherited from Object) | |
| PlugOff | Method to set the plug to off. | |
| PlugOn | Method to set the plug to on. | |
| ResetBluetoothPinBackOffTimer | Method to reset bluetooth holdoff timer that keeps the user from attempting multiple back to back PIN guesses. The timeout increases based on the number of consecutive incorrect PIN attempts. | |
| ResumeLoadControllerFirmwareLoading | Method to resume the Load controller firmware loading. | |
| RoomAllOff | Method to set all loads in the room to off. | |
| SaveBluetoothPin | Method to save Bluetooth PIN. Between the 4-digit and the 6-digit PIN, the FW will only save the one currently specified by BluetoothPinType. | |
| SuspendLoadControllerFirmwareLoading | Method to suspend the Load controller firmware loading. | |
| ToString | Returns a string that represents the current object. (Inherited from Object) |