Click or drag to resize

DmcStroE Properties

The DmcStroE type exposes the following members.

Properties
 NameDescription
Public propertyConnectedIpList A property containing the list of the ConnectedIpInformation objects which contain information about the devices that are connected to this IP ID. This property is only valid for an ethernet device. If this is not an ethernet device, then this property will return null. If this is an ethernet device, the list will be non-null. It will be empty if no devices are connected. The order of items in this list is not guaranteed.
(Inherited from GenericDevice)
Public propertyContentLanFeedback Reports the content LAN mode.

The DMOutputChange event will trigger with ContentLanModeEventId.

Public propertyContentLanLinkStatusFeedback Indicates if an Ethernet link is detected at the content LAN output of the DMC-STRO. 'true = Ethernet link detected; 'false = Ethernet link not detected.

The DMOutputChange event will trigger with ContentLANLinkStatusEventId.

Public propertyContentLanMode Sets the Content LAN Mode. (Sets which interface to use for streaming)
Public propertyControl The object of common stream control class DmcStroControl for Dmco70, Dmco73, Dmco74, Dmco75, Dmco76, Dmco77 and DmcStroSingle.

The DMOutputChange event will trigger with DMOutputEventIds.

Public propertyCurrentDefaultRouterFeedback Reports the default router address of the encoder. The default router address is given in dot decimal notation.

The DMOutputChange event will trigger with CurrentDefaultRouterEventId.

Public propertyCurrentDomainnameFeedback Reports the current domain name of the encoder.

The DMOutputChange event will trigger with CurrentDomainNameEventId.

Public propertyCurrentDomainNameServerFeedback Reports the current DNS server that is used by the encoder.

The DMOutputChange event will trigger with CurrentDomainNameServerEventId.

Public propertyCurrentIpAddressFeedback Reports the current IP address of the encoder. The IP address is given in dot decimal notation.

The DMOutputChange event will trigger with CurrentIpAddressEventId.

Public propertyCurrentSubnetMaskFeedback Reports the current subnet mask of the encoder. The subnet mask is given in dot decimal notation.

The DMOutputChange event will trigger with CurrentSubnetMaskEventId.

Public propertyCode exampleDescription Get/Set the description of this device.
(Inherited from GenericBase)
Public propertyDisableDhcpFeedback Indicates that DHCP (dynamic IP addressing) is disabled. 'true = DHCP Disabled; 'false' = DHCP Enabled

The DMOutputChange event will trigger with DisableDhcpEventId.

Public propertyDisposed Property to indicate if the device has been disposed.
(Inherited from GenericDevice)
Public propertyEnableDhcpFeedback Indicates that DHCP (dynamic IP addressing) on the encoder is enabled. 'true = DHCP Enabled; 'false' = DHCP Disabled

The DMOutputChange event will trigger with EnableDhcpEventId.

Public propertyHostName Sets the hostname of the encoder. The hostname can consist of up to 63 characters with no spaces. Valid characters are 0 – 9, A – Z and hyphen. The hostname cannot begin with a hyphen or number.
Public propertyHostNameFeedback Reports the hostname of the encoder.

The DMOutputChange event will trigger with HostNameEventId.

Public propertyID Property to get the ID of the device.
(Inherited from GenericDevice)
Public propertyIsOnline Property to get the current online state of the device.
(Inherited from GenericDevice)
Public propertyName Get the name of this device.
(Inherited from GenericBase)
Public propertyOnlineFeedback Indicates whether the card is online or offline; that is, whether it is running properly (responding to polls) on the internal network. The output will remain 'true' for as long as the card is online. 'true' = Card online (running); 'false' = Card offline (not running)

The DMOutputChange event will trigger with OnlineFeedbackEventId.

Public propertyParent The parent that a given object was added to.
(Inherited from GenericBase)
Public propertyPresentFeedback Indicates whether the card is physically plugged into the card slot on the Switch. The output will remain 'true' for as long as the card is detected. 'true' = Card present; 'false' = Card not installed

The DMOutputChange event will trigger with PresentFeedbackEventId.

Public propertyRegisterable Property to indicate that this device can be registered.
(Inherited from GenericDevice)
Public propertyRegistered Property to get the current registration state of the device.
(Inherited from GenericDevice)
Public propertyRegistrationFailureReason Property to get the Registration Failure Reason, this will match the return value from the call to register.
(Inherited from GenericDevice)
Protected propertySIMPLDeviceImplementation Internal protected member used for actual device control.
(Inherited from GenericDevice)
Public propertyStaticDefaultRouter Sets the static default router address of the encoder. Note that these settings will only be used when DHCP is disabled!
Public propertyStaticDefaultRouterFeedback Report the default router address of the encoder. The default router address is given in dot decimal notation.

The DMOutputChange event will trigger with StaticDefaultRouterEventId.

Public propertyStaticDomainName Sets the domain name of the encoder. The domain name should be set according to the requirements of the network administrator. Note that the "Static_Domain_Name" will only be used when DHCP is disabled!
Public propertyStaticDomainNameFeedback Reports the domain name of the encoder.

The DMOutputChange event will trigger with StaticDomainNameEventId.

Public propertyStaticDomainNameServer Sets the DNS (Domain Name Server) that the encoder will use. The string format is in dot decimal notation. Note that the "Static_Domain_Server_Name" will only be used when DHCP is disabled!
Public propertyStaticDomainNameServerFeedback Reports the DNS server that is used by the encoder.

The DMOutputChange event will trigger with StaticDomainNameServerEventId.

Public propertyStaticIpAddress Sets the static IP address of the encoder. Note that these settings will only be used when DHCP is disabled!
Public propertyStaticIpAddressFeedback Report the IP address of the encoder. The IP address is given in dot decimal notation.

The DMOutputChange event will trigger with StaticIpAddressEventId.

Public propertyStaticSubnetMask Sets the static subnet mask of the encoder. Note that these settings will only be used when DHCP is disabled!
Public propertyStaticSubnetMaskFeedback Report the subnet mask of the encoder. The subnet mask is given in dot decimal notation.

The DMOutputChange event will trigger with StaticSubnetMaskEventId.

Public propertySwitcher Switcher this card is attached to.
(Inherited from CardDevice)
Public propertySwitcherInputOutput Reference back to this cards corresponding switcher input or output.
(Inherited from CardDevice)
Public propertyType The type of card created
(Inherited from CardDevice)
Public propertyUnRegistrationFailureReason Property to get the Unregistration Failure Reason, this will match the return value from the call to unregister.
(Inherited from GenericDevice)
Public propertyUserSpecifiedObject Can be assigned anything that user wants.
(Inherited from GenericBase)
Protected propertyXioEndpointStubSIMPLDevice The SIMPL "stub" Device that the XiO Director creates for an endpoint to send the 1C/0E to the correct place in hierarchy.
(Inherited from GenericDevice)
Top
See Also