Cls |
The ClsC6xBaseClsC6ShadeController type exposes the following members.
| Name | Description | |
|---|---|---|
| CloseMomentary |
Closes Shade toward the lower limit of travel when set to true, and stops when set to false
On the C2nSdc or C2nSdcDc device, the shade will stop when MaxTime expires.
(Inherited from ShadeDrapeController) | |
| CloseMomentaryFull | Closes the shade group toward the full closed position for as long as the value is true (close momentary) and stops on release. If the property changes from true to false within 0.5 seconds, then the shades close to the full closed position (close full). | |
| JogTime |
Defines the period that Shade will jog open or jog closed.
Valid values range from 0.05s (5) to 2s (200).
Values above 2s will set the jog time to 2 seconds; values below 0.05s will set the jog time to 0.05s
(Inherited from ShadeDrapeController) | |
| LastDirCloseFeedback |
Indicates that the current direction of movement is toward the lower limit. If not currently moving, indicates that the previous direction of movement
was toward the lower limit.
The "BaseEvent" event will trigger with LastDirCloseFeedbackEventId. The BaseEvent event will trigger with LastDirCloseFeedbackEventId for "ClsC6xBase.ClsC6ShadeController" and with Index will indicate the index into the "ClsC6xBase.ShadeGroups" collection. (Inherited from ShadeDrapeController) | |
| LastDirOpenFeedback |
Indicates that the current direction of movement is toward the upper limit. If not currently moving, indicates that the previous direction of movement
was toward the upper limit.
The "BaseEvent" event will trigger with LastDirOpenFeedbackEventId. The BaseEvent event will trigger with LastDirOpenFeedbackEventId for "ClsC6xBase.ClsC6ShadeController" and with Index will indicate the index into the "ClsC6xBase.ShadeGroups" collection. (Inherited from ShadeDrapeController) | |
| LockOutTime |
Defines the minimum period that Shade must remain in the stop state before changing directions.
Valid values range from 0.2s (2) to 2s (200). The default is 1s.
This property is only valid on the C2nSdc and C2nSdcDc devices.
(Inherited from ShadeDrapeController) | |
| LowerLimitDown |
Close Shade while the input is true, and sets the lower travel limit when set to false.
(Inherited from ShadeDrapeController) | |
| LowerLimitUp |
Opens Shade while the input is true, and sets the lower travel limit when set to false.
(Inherited from ShadeDrapeController) | |
| MaxTime |
Defines the maximum period that Shade will operate while opening or closing.
Valid values range from 10 seconds to 360 seconds (6 minutes). The default is 10 seconds.
This property is only valid on the C2nSdc and C2nSdcDc devices.
(Inherited from ShadeDrapeController) | |
| MovingFeedback |
Sig to indicate that the shade is moving.
The "BaseEvent" event will trigger with MovingFeedbackEventId. The BaseEvent event will trigger with MovingFeedbackEventId for "ClsC6xBase.ClsC6ShadeController" and with Index will indicate the index into the "ClsC6xBase.ShadeGroups" collection. (Inherited from ShadeDrapeController) | |
| NotPresentFeedback |
Indicates if the shade is present or not.
The "BaseEvent" event will trigger with NotPresentEventId. (Inherited from ShadeDrapeController) | |
| Number |
Controller number
(Inherited from ShadeDrapeController) | |
| OpenMomentary |
Opens Shade toward the upper limit of travel when set to true, and stops when set to false
On the C2nSdc or C2nSdcDc device, the shade will stop when MaxTime expires.
(Inherited from ShadeDrapeController) | |
| OpenMomentaryFull | Opens the shade group toward the full open position for as long as the value is true (open momentary) and stops on release. If the property value changes from true to false within 0.5 seconds, then the shades open to the full open position (open full). | |
| Parent |
The parent that a given object was added to.
(Inherited from ShadeDrapeController) | |
| Position |
Sets the position of the Shade relative to the full range of travel between the upper and lower limits.
Valid values range from 0d to 65,535d (upper limit), which is 0000h to FFFFh (upper limit).
Note: Only the most significant bits affect the position.
0000h = No movement
00xxh (where xx is any value between 01 and FF) = Lower limit
FFxxh (where xx is any value between 01 through FF) = Upper limit
This property is only valid on the C2nSsc2 device.
(Inherited from ShadeDrapeController) | |
| PositionFeedback |
Indicates the position of Shade when ReportPosition is set to true, and all subsequent changes in position for as long as ReportPosition is set to true.
Reported values range from 0 to 65,535 (upper limit), which is 0000h to FFFFh (upper limit).
The "BaseEvent" event will trigger with PositionFeedbackEventId. The BaseEvent event will trigger with PositionFeedbackEventId for "ClsC6xBase.ClsC6ShadeController" and with Index will indicate the index into the "ClsC6xBase.ShadeGroups" collection. (Inherited from ShadeDrapeController) | |
| PresetNumber |
Sets the preset number for which a position will be saved when the SetPreset is called or recalled when the RecallPreset is called.
This property is only valid on the C2nSsc2 device.
(Inherited from ShadeDrapeController) | |
| ReportPosition |
Reports the position of the Shade via the PositionFeedback when set to true.
Subsequent changes in position continue to be reported for as long as the input remains true.
(Inherited from ShadeDrapeController) | |
| UpperLimitDown |
Close Shade while the input is true, and sets the upper travel limit when set to false.
(Inherited from ShadeDrapeController) | |
| UpperLimitUp |
Opens Shade while the input is true, and sets the upper travel limit when set to false.
(Inherited from ShadeDrapeController) | |
| UserSpecifiedObject |
User specified object.
(Inherited from ShadeDrapeController) |